#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
+#include <watchdog.h>
#if defined(CONFIG_CMD_MEMORY) \
|| defined(CONFIG_CMD_I2C) \
/* check if we are copying to Flash */
if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
- && (!addr_dataflash(addr))
+ && (!addr_dataflash(dest))
#endif
) {
int rc;
}
/* Check if we are copying from DataFlash to RAM */
- if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
+ if (addr_dataflash(addr) && !addr_dataflash(dest)
+#ifndef CFG_NO_FLASH
+ && (addr2info(dest) == NULL)
+#endif
+ ){
int rc;
rc = read_dataflash(addr, count * size, (char *) dest);
if (rc != 1) {
}
}
start[test_offset] = pattern;
+ WATCHDOG_RESET();
/*
* Check for addr bits stuck low or shorted.
* Fill memory with a known pattern.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
start[offset] = pattern;
}
* Check each location and invert it for the second pass.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE (read/write) @ 0x%.8lx:"
* Check each location for the inverted pattern and zero it.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
anti_pattern = ~pattern;
temp = start[offset];
if (temp != anti_pattern) {
pattern, "");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
*addr = val;
val += incr;
}
puts ("Reading...");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
readback = *addr;
if (readback != val) {
printf ("\nMem error @ 0x%08X: "
/**************************************************/
#if defined(CONFIG_CMD_MEMORY)
U_BOOT_CMD(
- md, 3, 1, do_mem_md,
- "md - memory display\n",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ md, 3, 1, do_mem_md,
+ "md - memory display\n",
+ "[.b, .w, .l] address [# of objects]\n - memory display\n"
);
U_BOOT_CMD(
- mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
+ mm, 2, 1, do_mem_mm,
+ "mm - memory modify (auto-incrementing)\n",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
U_BOOT_CMD(
- nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
+ nm, 2, 1, do_mem_nm,
+ "nm - memory modify (constant address)\n",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
- mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ mw, 4, 1, do_mem_mw,
+ "mw - memory write (fill)\n",
+ "[.b, .w, .l] address value [count]\n - write memory\n"
);
U_BOOT_CMD(
- cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
+ cp, 4, 1, do_mem_cp,
+ "cp - memory copy\n",
"[.b, .w, .l] source target count\n - copy memory\n"
);
U_BOOT_CMD(
- cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
+ cmp, 4, 1, do_mem_cmp,
+ "cmp - memory compare\n",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
- crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 4, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 5, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area\n"
);
#endif /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ base, 2, 1, do_mem_base,
+ "base - print or set address offset\n",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
U_BOOT_CMD(
- loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
+ loop, 3, 1, do_mem_loop,
+ "loop - infinite loop on address range\n",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
- loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
+ loopw, 4, 1, do_mem_loopw,
+ "loopw - infinite write loop on address range\n",
"[.b, .w, .l] address number_of_objects data_to_write\n"
" - loop on a set of addresses\n"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
- mtest, 4, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
+ mtest, 4, 1, do_mem_mtest,
+ "mtest - simple RAM test\n",
"[start [end [pattern]]]\n"
" - simple RAM read/write test\n"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
- mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
+ mdc, 4, 1, do_mem_mdc,
+ "mdc - memory display cyclic\n",
"[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
);
U_BOOT_CMD(
- mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
+ mwc, 4, 1, do_mem_mwc,
+ "mwc - memory write cyclic\n",
"[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
);
#endif /* CONFIG_MX_CYCLIC */
projects / karo-tx-uboot.git / blobdiff