#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \
!defined(CONFIG_ENV_IS_IN_FLASH) && \
!defined(CONFIG_ENV_IS_IN_DATAFLASH) && \
- !defined(CONFIG_ENV_IS_IN_MG_DISK) && \
!defined(CONFIG_ENV_IS_IN_MMC) && \
!defined(CONFIG_ENV_IS_IN_FAT) && \
!defined(CONFIG_ENV_IS_IN_NAND) && \
!defined(CONFIG_ENV_IS_IN_NVRAM) && \
!defined(CONFIG_ENV_IS_IN_ONENAND) && \
!defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
+ !defined(CONFIG_ENV_IS_IN_REMOTE) && \
!defined(CONFIG_ENV_IS_NOWHERE)
# error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
-SPI_FLASH|MG_DISK|NVRAM|MMC|FAT} or CONFIG_ENV_IS_NOWHERE
+SPI_FLASH|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE
#endif
-#define XMK_STR(x) #x
-#define MK_STR(x) XMK_STR(x)
-
/*
* Maximum expected input data size for import command
*/
return env_id;
}
+#ifndef CONFIG_SPL_BUILD
/*
* Command interface: print one or all environment variables
*
return 0;
}
-int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
int i;
int rcode = 0;
return rcode;
}
#endif
+#endif /* CONFIG_SPL_BUILD */
/*
- * Set a new environment variable,
- * or replace or delete an existing one.
+ * Perform consistency checking before setting, replacing, or deleting an
+ * environment variable, then (if successful) apply the changes to internals so
+ * to make them effective. Code for this function was taken out of
+ * _do_env_set(), which now calls it instead.
+ * Also called as a callback function by himport_r().
+ * Returns 0 in case of success, 1 in case of failure.
+ * When (flag & H_FORCE) is set, do not print out any error message and force
+ * overwriting of write-once variables.
*/
-int _do_env_set(int flag, int argc, char * const argv[])
+
+int env_check_apply(const char *name, const char *oldval,
+ const char *newval, int flag)
{
- bd_t *bd = gd->bd;
- int i, len;
int console = -1;
- char *name, *value, *s;
- ENTRY e, *ep;
- name = argv[1];
-
- if (strchr(name, '=')) {
- printf("## Error: illegal character '=' in variable name"
- "\"%s\"\n", name);
- return 1;
- }
-
- env_id++;
- /*
- * search if variable with this name already exists
- */
- e.key = name;
- e.data = NULL;
- hsearch_r(e, FIND, &ep, &env_htab);
+ /* Default value for NULL to protect string-manipulating functions */
+ newval = newval ? : "";
/* Check for console redirection */
if (strcmp(name, "stdin") == 0)
console = stderr;
if (console != -1) {
- if (argc < 3) { /* Cannot delete it! */
- printf("Can't delete \"%s\"\n", name);
+ if ((newval == NULL) || (*newval == '\0')) {
+ /* We cannot delete stdin/stdout/stderr */
+ if ((flag & H_FORCE) == 0)
+ printf("Can't delete \"%s\"\n", name);
return 1;
}
#ifdef CONFIG_CONSOLE_MUX
- i = iomux_doenv(console, argv[2]);
- if (i)
- return i;
+ if (iomux_doenv(console, newval))
+ return 1;
#else
/* Try assigning specified device */
- if (console_assign(console, argv[2]) < 0)
+ if (console_assign(console, newval) < 0)
return 1;
-
-#ifdef CONFIG_SERIAL_MULTI
- if (serial_assign(argv[2]) < 0)
- return 1;
-#endif
#endif /* CONFIG_CONSOLE_MUX */
}
/*
- * Some variables like "ethaddr" and "serial#" can be set only
- * once and cannot be deleted; also, "ver" is readonly.
+ * Some variables like "ethaddr" and "serial#" can be set only once and
+ * cannot be deleted, unless CONFIG_ENV_OVERWRITE is defined.
*/
- if (ep) { /* variable exists */
#ifndef CONFIG_ENV_OVERWRITE
+ if (oldval != NULL && /* variable exists */
+ (flag & H_FORCE) == 0) { /* and we are not forced */
if (strcmp(name, "serial#") == 0 ||
(strcmp(name, "ethaddr") == 0
#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR)
- && strcmp(ep->data, MK_STR(CONFIG_ETHADDR)) != 0
+ && strcmp(oldval, __stringify(CONFIG_ETHADDR)) != 0
#endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */
)) {
printf("Can't overwrite \"%s\"\n", name);
return 1;
}
+ }
#endif
+ /*
+ * When we change baudrate, or we are doing an env default -a
+ * (which will erase all variables prior to calling this),
+ * we want the baudrate to actually change - for real.
+ */
+ if (oldval != NULL || /* variable exists */
+ (flag & H_NOCLEAR) == 0) { /* or env is clear */
/*
* Switch to new baudrate if new baudrate is supported
*/
if (strcmp(name, "baudrate") == 0) {
- int baudrate = simple_strtoul(argv[2], NULL, 10);
+ int baudrate = simple_strtoul(newval, NULL, 10);
int i;
for (i = 0; i < N_BAUDRATES; ++i) {
if (baudrate == baudrate_table[i])
break;
}
if (i == N_BAUDRATES) {
- printf("## Baudrate %d bps not supported\n",
- baudrate);
+ if ((flag & H_FORCE) == 0)
+ printf("## Baudrate %d bps not "
+ "supported\n", baudrate);
return 1;
}
+ if (gd->baudrate == baudrate) {
+ /* If unchanged, we just say it's OK */
+ return 0;
+ }
printf("## Switch baudrate to %d bps and"
- "press ENTER ...\n", baudrate);
+ "press ENTER ...\n", baudrate);
udelay(50000);
gd->baudrate = baudrate;
#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
}
}
+ /*
+ * Some variables should be updated when the corresponding
+ * entry in the environment is changed
+ */
+ if (strcmp(name, "loadaddr") == 0) {
+ load_addr = simple_strtoul(newval, NULL, 16);
+ return 0;
+ }
+#if defined(CONFIG_CMD_NET)
+ else if (strcmp(name, "bootfile") == 0) {
+ copy_filename(BootFile, newval, sizeof(BootFile));
+ return 0;
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Set a new environment variable,
+ * or replace or delete an existing one.
+*/
+static int _do_env_set(int flag, int argc, char * const argv[])
+{
+ int i, len;
+ char *name, *value, *s;
+ ENTRY e, *ep;
+
+ name = argv[1];
+ value = argv[2];
+
+ if (strchr(name, '=')) {
+ printf("## Error: illegal character '='"
+ "in variable name \"%s\"\n", name);
+ return 1;
+ }
+
+ env_id++;
+ /*
+ * search if variable with this name already exists
+ */
+ e.key = name;
+ e.data = NULL;
+ hsearch_r(e, FIND, &ep, &env_htab);
+
+ /*
+ * Perform requested checks. Notice how since we are overwriting
+ * a single variable, we need to set H_NOCLEAR
+ */
+ if (env_check_apply(name, ep ? ep->data : NULL, value, H_NOCLEAR)) {
+ debug("check function did not approve, refusing\n");
+ return 1;
+ }
+
/* Delete only ? */
if (argc < 3 || argv[2] == NULL) {
- int rc = hdelete_r(name, &env_htab);
+ int rc = hdelete_r(name, &env_htab, 0);
return !rc;
}
return 1;
}
- /*
- * Some variables should be updated when the corresponding
- * entry in the environment is changed
- */
- if (strcmp(name, "ipaddr") == 0) {
- char *s = argv[2]; /* always use only one arg */
- char *e;
- unsigned long addr;
- bd->bi_ip_addr = 0;
- for (addr = 0, i = 0; i < 4; ++i) {
- ulong val = s ? simple_strtoul(s, &e, 10) : 0;
- addr <<= 8;
- addr |= val & 0xFF;
- if (s)
- s = *e ? e + 1 : e;
- }
- bd->bi_ip_addr = htonl(addr);
- return 0;
- } else if (strcmp(argv[1], "loadaddr") == 0) {
- load_addr = simple_strtoul(argv[2], NULL, 16);
- return 0;
- }
-#if defined(CONFIG_CMD_NET)
- else if (strcmp(argv[1], "bootfile") == 0) {
- copy_filename(BootFile, argv[2], sizeof(BootFile));
- return 0;
- }
-#endif
return 0;
}
return setenv(varname, str);
}
-int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+#ifndef CONFIG_SPL_BUILD
+static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
* Interactively edit an environment variable
*/
#if defined(CONFIG_CMD_EDITENV)
-int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
char buffer[CONFIG_SYS_CBSIZE];
char *init_val;
return setenv(argv[1], buffer);
}
#endif /* CONFIG_CMD_EDITENV */
+#endif /* CONFIG_SPL_BUILD */
/*
* Look up variable from environment,
return str ? simple_strtoul(str, NULL, base) : default_val;
}
+#ifndef CONFIG_SPL_BUILD
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
-int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
printf("Saving Environment to %s...\n", env_name_spec);
""
);
#endif
+#endif /* CONFIG_SPL_BUILD */
/*
*/
int envmatch(uchar *s1, int i2)
{
+ if (s1 == NULL)
+ return -1;
+
while (*s1 == env_get_char(i2++))
if (*s1++ == '=')
return i2;
return -1;
}
-static int do_env_default(cmd_tbl_t *cmdtp, int flag,
+#ifndef CONFIG_SPL_BUILD
+static int do_env_default(cmd_tbl_t *cmdtp, int __flag,
int argc, char * const argv[])
{
- if (argc != 2 || strcmp(argv[1], "-f") != 0)
- return CMD_RET_USAGE;
+ int all = 0, flag = 0;
- set_default_env("## Resetting to default environment\n");
- return 0;
+ debug("Initial value for argc=%d\n", argc);
+ while (--argc > 0 && **++argv == '-') {
+ char *arg = *argv;
+
+ while (*++arg) {
+ switch (*arg) {
+ case 'a': /* default all */
+ all = 1;
+ break;
+ case 'f': /* force */
+ flag |= H_FORCE;
+ break;
+ default:
+ return cmd_usage(cmdtp);
+ }
+ }
+ }
+ debug("Final value for argc=%d\n", argc);
+ if (all && (argc == 0)) {
+ /* Reset the whole environment */
+ set_default_env("## Resetting to default environment\n");
+ return 0;
+ }
+ if (!all && (argc > 0)) {
+ /* Reset individual variables */
+ set_default_vars(argc, argv);
+ return 0;
+ }
+
+ return cmd_usage(cmdtp);
}
static int do_env_delete(cmd_tbl_t *cmdtp, int flag,
addr = (char *)ep->data;
}
- if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR) == 0) {
+ if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR,
+ 0, NULL, 0 /* do_apply */) == 0) {
error("Environment import failed: errno = %d\n", errno);
return 1;
}
return CMD_RET_USAGE;
}
-U_BOOT_CMD(
- env, CONFIG_SYS_MAXARGS, 1, do_env,
- "environment handling commands",
+#ifdef CONFIG_SYS_LONGHELP
+static char env_help_text[] =
#if defined(CONFIG_CMD_ASKENV)
"ask name [message] [size] - ask for environment variable\nenv "
#endif
- "default -f - reset default environment\n"
+ "default [-f] -a - [forcibly] reset default environment\n"
+ "env default [-f] var [...] - [forcibly] reset variable(s) to their default values\n"
#if defined(CONFIG_CMD_EDITENV)
"env edit name - edit environment variable\n"
#endif
+#if defined(CONFIG_CMD_EXPORTENV)
"env export [-t | -b | -c] [-s size] addr [var ...] - export environment\n"
+#endif
#if defined(CONFIG_CMD_GREPENV)
"env grep string [...] - search environment\n"
#endif
+#if defined(CONFIG_CMD_IMPORTENV)
"env import [-d] [-t | -b | -c] addr [size] - import environment\n"
+#endif
"env print [name ...] - print environment\n"
#if defined(CONFIG_CMD_RUN)
"env run var [...] - run commands in an environment variable\n"
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
"env save - save environment\n"
#endif
- "env set [-f] name [arg ...]\n"
+ "env set [-f] name [arg ...]\n";
+#endif
+
+U_BOOT_CMD(
+ env, CONFIG_SYS_MAXARGS, 1, do_env,
+ "environment handling commands", env_help_text
);
/*
var_complete
);
#endif
+#endif /* CONFIG_SPL_BUILD */
projects / karo-tx-uboot.git / blobdiff