*/
#include <common.h>
-
-#ifdef CONFIG_PCI
-
#include <command.h>
-#include <cmd_boot.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <cmd_pci.h>
#include <pci.h>
-#if (CONFIG_COMMANDS & CFG_CMD_PCI)
-
-extern int cmd_get_data_size(char* arg, int default_size);
-
-unsigned char ShortPCIListing = 1;
-
/*
* Follows routines for the output of infos about devices on PCI bus.
*/
* Subroutine: pciinfo
*
* Description: Show information about devices on PCI bus.
- * Depending on the define CFG_SHORT_PCI_LISTING
+ * Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
* the output will be more or less exhaustive.
*
* Inputs: bus_no the number of the bus to be scanned.
}
}
-char* pci_classes_str(u8 class)
-{
- static char *pci_classes[] = {
- "Build before PCI Rev2.0",
- "Mass storage controller",
- "Network controller ",
- "Display controller ",
- "Multimedia device ",
- "Memory controller ",
- "Bridge device ",
- "Simple comm. controller",
- "Base system peripheral ",
- "Input device ",
- "Docking station ",
- "Processor ",
- "Serial bus controller ",
- "Reserved entry ",
- "Does not fit any class "
- };
-
- if (class < (sizeof pci_classes / sizeof *pci_classes))
- return pci_classes[(int) class];
-
- return "??? ";
-}
/*
* Subroutine: pci_header_show_brief
*
* Description: Reads and prints the header of the
- * specified PCI device in short form.
+ * specified PCI device in short form.
*
* Inputs: dev Bus+Device+Function number
*
pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
- printf("0x%.4x 0x%.4x %s 0x%.2x\n",
+ printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
vendor, device,
- pci_classes_str(class), subclass);
+ pci_class_str(class), subclass);
}
/*
PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
- pci_classes_str);
+ pci_class_str);
PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
break;
-
+
case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
- PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
+ PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
break;
-
+
default:
printf("unknown header\n");
- break;
+ break;
}
#undef PRINT
{
ulong i;
int nbytes;
- extern char console_buffer[];
uint val4;
ushort val2;
u_char val1;
* pci modify[.b, .w, .l] bus.device.function [addr]
* pci write[.b, .w, .l] bus.device.function addr value
*/
-int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr = 0, value = 0, size = 0;
pci_dev_t bdf = 0;
if ((bdf = get_pci_dev(argv[2])) == -1)
return 1;
break;
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ break;
+#endif
default: /* scan bus */
value = 1; /* short listing */
bdf = 0; /* bus number */
return 0;
case 'd': /* display */
return pci_cfg_display(bdf, addr, size, value);
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ pci_init();
+ return 0;
+#endif
case 'n': /* next */
if (argc < 4)
goto usage;
return 1;
usage:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return CMD_RET_USAGE;
}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_PCI) */
+/***************************************************/
+
+#ifdef CONFIG_SYS_LONGHELP
+static char pci_help_text[] =
+ "[bus] [long]\n"
+ " - short or long list of PCI devices on bus 'bus'\n"
+#ifdef CONFIG_CMD_PCI_ENUM
+ "pci enum\n"
+ " - re-enumerate PCI buses\n"
+#endif
+ "pci header b.d.f\n"
+ " - show header of PCI device 'bus.device.function'\n"
+ "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
+ " - display PCI configuration space (CFG)\n"
+ "pci next[.b, .w, .l] b.d.f address\n"
+ " - modify, read and keep CFG address\n"
+ "pci modify[.b, .w, .l] b.d.f address\n"
+ " - modify, auto increment CFG address\n"
+ "pci write[.b, .w, .l] b.d.f address value\n"
+ " - write to CFG address";
+#endif
-#endif /* CONFIG_PCI */
+U_BOOT_CMD(
+ pci, 5, 1, do_pci,
+ "list and access PCI Configuration Space", pci_help_text
+);
projects / karo-tx-uboot.git / blobdiff