/*
- *
* Most of this source has been derived from the Linux USB
* project:
* (C) Copyright Linus Torvalds 1999
* Adapted for U-Boot:
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-
+#include <compiler.h>
+#include <errno.h>
#include <usb.h>
#ifdef CONFIG_4xx
#include <asm/4xx_pci.h>
void *ctrl;
struct usb_device *dev;
int i, start_index = 0;
+ int ret;
dev_index = 0;
asynch_allowed = 1;
for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
/* init low_level USB */
printf("USB%d: ", i);
- if (usb_lowlevel_init(i, &ctrl)) {
+ ret = usb_lowlevel_init(i, USB_INIT_HOST, &ctrl);
+ if (ret == -ENODEV) { /* No such device. */
+ puts("Port not available.\n");
+ continue;
+ }
+
+ if (ret) { /* Other error. */
puts("lowlevel init failed\n");
continue;
}
/*******************************************************************************
* Parse the config, located in buffer, and fills the dev->config structure.
* Note that all little/big endian swapping are done automatically.
+ * (wTotalLength has already been swapped and sanitized when it was read.)
*/
static int usb_parse_config(struct usb_device *dev,
unsigned char *buffer, int cfgno)
head->bDescriptorType);
return -1;
}
- memcpy(&dev->config, buffer, buffer[0]);
- le16_to_cpus(&(dev->config.desc.wTotalLength));
+ if (head->bLength != USB_DT_CONFIG_SIZE) {
+ printf("ERROR: Invalid USB CFG length (%d)\n", head->bLength);
+ return -1;
+ }
+ memcpy(&dev->config, head, USB_DT_CONFIG_SIZE);
dev->config.no_of_if = 0;
index = dev->config.desc.bLength;
/* Ok the first entry must be a configuration entry,
* now process the others */
head = (struct usb_descriptor_header *) &buffer[index];
- while (index + 1 < dev->config.desc.wTotalLength) {
+ while (index + 1 < dev->config.desc.wTotalLength && head->bLength) {
switch (head->bDescriptorType) {
case USB_DT_INTERFACE:
+ if (head->bLength != USB_DT_INTERFACE_SIZE) {
+ printf("ERROR: Invalid USB IF length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_INTERFACE_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB IF descriptor overflowed buffer!\n");
+ break;
+ }
if (((struct usb_interface_descriptor *) \
- &buffer[index])->bInterfaceNumber != curr_if_num) {
+ head)->bInterfaceNumber != curr_if_num) {
/* this is a new interface, copy new desc */
ifno = dev->config.no_of_if;
+ if (ifno >= USB_MAXINTERFACES) {
+ puts("Too many USB interfaces!\n");
+ /* try to go on with what we have */
+ return 1;
+ }
if_desc = &dev->config.if_desc[ifno];
dev->config.no_of_if++;
- memcpy(if_desc, &buffer[index], buffer[index]);
+ memcpy(if_desc, head,
+ USB_DT_INTERFACE_SIZE);
if_desc->no_of_ep = 0;
if_desc->num_altsetting = 1;
curr_if_num =
}
break;
case USB_DT_ENDPOINT:
+ if (head->bLength != USB_DT_ENDPOINT_SIZE) {
+ printf("ERROR: Invalid USB EP length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_ENDPOINT_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB EP descriptor overflowed buffer!\n");
+ break;
+ }
+ if (ifno < 0) {
+ puts("Endpoint descriptor out of order!\n");
+ break;
+ }
epno = dev->config.if_desc[ifno].no_of_ep;
if_desc = &dev->config.if_desc[ifno];
+ if (epno > USB_MAXENDPOINTS) {
+ printf("Interface %d has too many endpoints!\n",
+ if_desc->desc.bInterfaceNumber);
+ return 1;
+ }
/* found an endpoint */
if_desc->no_of_ep++;
- memcpy(&if_desc->ep_desc[epno],
- &buffer[index], buffer[index]);
+ memcpy(&if_desc->ep_desc[epno], head,
+ USB_DT_ENDPOINT_SIZE);
ep_wMaxPacketSize = get_unaligned(&dev->config.\
if_desc[ifno].\
ep_desc[epno].\
debug("if %d, ep %d\n", ifno, epno);
break;
case USB_DT_SS_ENDPOINT_COMP:
+ if (head->bLength != USB_DT_SS_EP_COMP_SIZE) {
+ printf("ERROR: Invalid USB EPC length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_SS_EP_COMP_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB EPC descriptor overflowed buffer!\n");
+ break;
+ }
+ if (ifno < 0 || epno < 0) {
+ puts("EPC descriptor out of order!\n");
+ break;
+ }
if_desc = &dev->config.if_desc[ifno];
- memcpy(&if_desc->ss_ep_comp_desc[epno],
- &buffer[index], buffer[index]);
+ memcpy(&if_desc->ss_ep_comp_desc[epno], head,
+ USB_DT_SS_EP_COMP_SIZE);
break;
default:
if (head->bLength == 0)
unsigned char *buffer, int cfgno)
{
int result;
- unsigned int tmp;
+ unsigned int length;
struct usb_config_descriptor *config;
config = (struct usb_config_descriptor *)&buffer[0];
"(expected %i, got %i)\n", 9, result);
return -1;
}
- tmp = le16_to_cpu(config->wTotalLength);
+ length = le16_to_cpu(config->wTotalLength);
- if (tmp > USB_BUFSIZ) {
- printf("usb_get_configuration_no: failed to get " \
- "descriptor - too long: %d\n", tmp);
+ if (length > USB_BUFSIZ) {
+ printf("%s: failed to get descriptor - too long: %d\n",
+ __func__, length);
return -1;
}
- result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
- debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, tmp);
+ result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, length);
+ debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, length);
+ config->wTotalLength = length; /* validated, with CPU byte order */
+
return result;
}
usb_dev[dev_index].devnum = -1;
}
+/*
+ * XHCI issues Enable Slot command and thereafter
+ * allocates device contexts. Provide a weak alias
+ * function for the purpose, so that XHCI overrides it
+ * and EHCI/OHCI just work out of the box.
+ */
+__weak int usb_alloc_device(struct usb_device *udev)
+{
+ return 0;
+}
/*
* By the time we get here, the device has gotten a new device ID
* and is in the default state. We need to identify the thing and
int tmp;
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
+ /*
+ * Allocate usb 3.0 device context.
+ * USB 3.0 (xHCI) protocol tries to allocate device slot
+ * and related data structures first. This call does that.
+ * Refer to sec 4.3.2 in xHCI spec rev1.0
+ */
+ if (usb_alloc_device(dev)) {
+ printf("Cannot allocate device context to get SLOT_ID\n");
+ return -1;
+ }
+
/* We still haven't set the Address yet */
addr = dev->devnum;
dev->devnum = 0;
* http://sourceforge.net/mailarchive/forum.php?
* thread_id=5729457&forum_id=5398
*/
- struct usb_device_descriptor *desc;
+ __maybe_unused struct usb_device_descriptor *desc;
int port = -1;
struct usb_device *parent = dev->parent;
unsigned short portstatus;
dev->epmaxpacketin[0] = 64;
dev->epmaxpacketout[0] = 64;
+ /*
+ * XHCI needs to issue a Address device command to setup
+ * proper device context structures, before it can interact
+ * with the device. So a get_descriptor will fail before any
+ * of that is done for XHCI unlike EHCI.
+ */
+#ifndef CONFIG_USB_XHCI
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
if (err < 0) {
debug("usb_new_device: usb_get_descriptor() failed\n");
* to differentiate between HUB and DEVICE.
*/
dev->descriptor.bDeviceClass = desc->bDeviceClass;
+#endif
- /* find the port number we're at */
if (parent) {
int j;
+ /* find the port number we're at */
for (j = 0; j < parent->maxchild; j++) {
if (parent->children[j] == dev) {
port = j;
return 0;
}
+__weak
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return 0;
+}
/* EOF */