--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h> /* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+
+extern omap3_sysinfo sysinfo;
+static gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
+static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
+static ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE;
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 cpuid = 0;
+
+ /*
+ * On ES1.0 the IDCODE register is not exposed on L4
+ * so using CPU ID to differentiate
+ * between ES2.0 and ES1.0.
+ */
+ __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
+ if ((cpuid & 0xf) == 0x0)
+ return CPU_3430_ES1;
+ else
+ return CPU_3430_ES2;
+
+}
+
+/****************************************************
+ * is_mem_sdr() - return 1 if mem type in use is SDR
+ ****************************************************/
+u32 is_mem_sdr(void)
+{
+ if (readl(&sdrc_base->cs[CS0].mr) == SDP_SDRC_MR_0_SDR)
+ return 1;
+ return 0;
+}
+
+/***********************************************************************
+ * get_cs0_size() - get size of chip select 0/1
+ ************************************************************************/
+u32 get_sdr_cs_size(u32 cs)
+{
+ u32 size;
+
+ /* get ram size field */
+ size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
+ size &= 0x3FF; /* remove unwanted bits */
+ size *= SZ_2M; /* find size in MB */
+ return size;
+}
+
+/***********************************************************************
+ * get_sdr_cs_offset() - get offset of cs from cs0 start
+ ************************************************************************/
+u32 get_sdr_cs_offset(u32 cs)
+{
+ u32 offset;
+
+ if (!cs)
+ return 0;
+
+ offset = readl(&sdrc_base->cs_cfg);
+ offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
+
+ return offset;
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ * - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
+ * when they are available we can get info from there. This should
+ * be correct of all known boards up until today.
+ * - NOTE-2- EEPROMs are populated but they are updated very slowly. To
+ * avoid waiting on them we will use ES version of the chip to get info.
+ * A later version of the FPGA migth solve their speed issue.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+ if (get_cpu_rev() == CPU_3430_ES2)
+ return sysinfo.board_type_v2;
+ else
+ return sysinfo.board_type_v1;
+}
+
+/***************************************************************************
+ * get_gpmc0_base() - Return current address hardware will be
+ * fetching from. The below effectively gives what is correct, its a bit
+ * mis-leading compared to the TRM. For the most general case the mask
+ * needs to be also taken into account this does work in practice.
+ * - for u-boot we currently map:
+ * -- 0 to nothing,
+ * -- 4 to flash
+ * -- 8 to enent
+ * -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+ u32 b;
+
+ b = readl(&gpmc_cs_base->config7);
+ b &= 0x1F; /* keep base [5:0] */
+ b = b << 24; /* ret 0x0b000000 */
+ return b;
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+ return WIDTH_16BIT;
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ *************************************************************************/
+u32 get_board_rev(void)
+{
+ return 0x20;
+}
+
+/*********************************************************************
+ * display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+ char *mem_s, *sec_s;
+
+ if (is_mem_sdr())
+ mem_s = "mSDR";
+ else
+ mem_s = "LPDDR";
+
+ switch (get_device_type()) {
+ case TST_DEVICE:
+ sec_s = "TST";
+ break;
+ case EMU_DEVICE:
+ sec_s = "EMU";
+ break;
+ case HS_DEVICE:
+ sec_s = "HS";
+ break;
+ case GP_DEVICE:
+ sec_s = "GP";
+ break;
+ default:
+ sec_s = "?";
+ }
+
+ printf("OMAP%s-%s rev %d, CPU-OPP2 L3-165MHz\n", sysinfo.cpu_string,
+ sec_s, get_cpu_rev());
+ printf("%s + %s/%s\n", sysinfo.board_string,
+ mem_s, sysinfo.nand_string);
+
+}
+
+/********************************************************
+ * get_base(); get upper addr of current execution
+ *******************************************************/
+u32 get_base(void)
+{
+ u32 val;
+
+ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+ val &= 0xF0000000;
+ val >>= 28;
+ return val;
+}
+
+/********************************************************
+ * is_running_in_flash() - tell if currently running in
+ * FLASH.
+ *******************************************************/
+u32 is_running_in_flash(void)
+{
+ if (get_base() < 4)
+ return 1; /* in FLASH */
+
+ return 0; /* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ * is_running_in_sram() - tell if currently running in
+ * SRAM.
+ *******************************************************/
+u32 is_running_in_sram(void)
+{
+ if (get_base() == 4)
+ return 1; /* in SRAM */
+
+ return 0; /* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ * is_running_in_sdram() - tell if currently running in
+ * SDRAM.
+ *******************************************************/
+u32 is_running_in_sdram(void)
+{
+ if (get_base() > 4)
+ return 1; /* in SDRAM */
+
+ return 0; /* running in SRAM or FLASH */
+}
+
+/***************************************************************
+ * get_boot_type() - Is this an XIP type device or a stream one
+ * bits 4-0 specify type. Bit 5 says mem/perif
+ ***************************************************************/
+u32 get_boot_type(void)
+{
+ return (readl(&ctrl_base->status) & SYSBOOT_MASK);
+}
+
+/*************************************************************
+ * get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+ return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
+}
projects / karo-tx-uboot.git / blobdiff