- board/freescale/m547xevb/config.mk config make
- board/freescale/m547xevb/u-boot.lds Linker description
-- cpu/mcf547x_8x/cpu.c cpu specific code
-- cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
-- cpu/mcf547x_8x/slicetimer.c Timer support
-- cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
-- cpu/mcf547x_8x/Makefile Makefile
-- cpu/mcf547x_8x/config.mk config make
-- cpu/mcf547x_8x/start.S start up assembly code
+- arch/m68k/cpu/mcf547x_8x/cpu.c cpu specific code
+- arch/m68k/cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- arch/m68k/cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
+- arch/m68k/cpu/mcf547x_8x/slicetimer.c Timer support
+- arch/m68k/cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
+- arch/m68k/cpu/mcf547x_8x/Makefile Makefile
+- arch/m68k/cpu/mcf547x_8x/config.mk config make
+- arch/m68k/cpu/mcf547x_8x/start.S start up assembly code
- doc/README.m5475evb This readme file
- include/configs/M5475EVB.h Board specific configuration file
-- lib_m68k/board.c board init function
-- lib_m68k/cache.c
-- lib_m68k/interrupts Coldfire common interrupt functions
-- lib_m68k/m68k_linux.c
-- lib_m68k/traps.c Exception init code
+- arch/m68k/lib/board.c board init function
+- arch/m68k/lib/cache.c
+- arch/m68k/lib/interrupts Coldfire common interrupt functions
+- arch/m68k/lib/m68k_linux.c
+- arch/m68k/lib/traps.c Exception init code
1 MCF547x specific Options/Settings
====================================
CONFIG_M5475 -- define for M5475EVB board
CONFIG_MCFUART -- define to use common CF Uart driver
-CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE -- define UART baudrate
CONFIG_FSLDMAFEC -- define to use common dma FEC driver
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
CONFIG_MII -- enable to use MII driver
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY -- enable PHY discovery
-CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX -- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX -- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE -- Set FEC0 MII base register
-CFG_FEC1_MIIBASE -- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
CONFIG_FSL_I2C -- define to use FSL common I2C driver
CONFIG_HARD_I2C -- define for I2C hardware support
CONFIG_SOFT_I2C -- define for I2C bit-banged
-CFG_I2C_SPEED -- define for I2C speed
-CFG_I2C_SLAVE -- define for I2C slave address
-CFG_I2C_OFFSET -- define for I2C base address offset
-CFG_IMMR -- define for MBAR offset
+CONFIG_SYS_I2C_SPEED -- define for I2C speed
+CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
+CONFIG_SYS_IMMR -- define for MBAR offset
CONFIG_PCI -- define for PCI support
CONFIG_PCI_PNP -- define for Plug n play support
CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
-CFG_PCI_MEM_BUS -- PCI memory logical offset
-CFG_PCI_MEM_PHYS -- PCI memory physical offset
-CFG_PCI_MEM_SIZE -- PCI memory size
-CFG_PCI_IO_BUS -- PCI IO logical offset
-CFG_PCI_IO_PHYS -- PCI IO physical offset
-CFG_PCI_IO_SIZE -- PCI IO size
-CFG_PCI_CFG_BUS -- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS -- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE -- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
+CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
-CFG_MBAR -- define MBAR offset
+CONFIG_SYS_MBAR -- define MBAR offset
CONFIG_MONITOR_IS_IN_RAM -- Not support
-CFG_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
-CFG_CSn_BASE -- defines the Chip Select Base register
-CFG_CSn_MASK -- defines the Chip Select Mask register
-CFG_CSn_CTRL -- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
-CFG_SDRAM_BASE -- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
baudrate = 115200 bps
-> ?
? - alias for 'help'
-autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
+i2c - I2C sub-system
icache - enable or disable instruction cache
-icrc32 - checksum calculation
-iloop - infinite loop on address range
-imd - i2c memory display
iminfo - print header information for application image
imls - list all images found in flash
-imm - i2c memory modify (auto-incrementing)
-imw - memory write (fill)
-inm - memory modify (constant address)
-iprobe - probe to discover valid I2C chip addresses
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
+source - run script from memory
tftpboot- boot image via network using TFTP protocol
usb - USB sub-system
usbboot - boot from USB device
projects / karo-tx-uboot.git / blobdiff