Freescale MPC8360EMDS Board
-----------------------------------------
1. Board Switches and Jumpers
-1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
For some reason, the HW designers describe the switch settings
in terms of 0 and 1, and then map that to physical switches where
the label "On" refers to logic 0 and "Off" is logic 1.
include/configs/MPC8360EMDS.h
- CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360
+ CONFIG_MPC83xx MPC83xx family for both MPC8349 and MPC8360
CONFIG_MPC8360 MPC8360 specific
CONFIG_MPC8360EMDS MPC8360EMDS board specific
4. Compilation
+ MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip).
+
Assuming you're using BASH shell:
export CROSS_COMPILE=your-cross-compile-prefix
cd u-boot
make distclean
- make MPC8360EMDS_config
+ make MPC8360EMDS_XX_config
make
- MPC8360 support PCI in host and slave mode.
+ MPC8360EMDS support ATM, PCI in host and slave mode.
+
+ To make u-boot support ATM :
+ 1) Make MPC8360EMDS_XX_ATM_config
To make u-boot support PCI host 66M :
1) DIP SW support PCI mode as described in Section 1.1.
- 2) Make MPC8360EMDS_HOST_66_config
+ 2) Make MPC8360EMDS_XX_HOST_66_config
To make u-boot support PCI host 33M :
1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
- 2) Make MPC8360EMDS_HOST_33_config
+ 2) Make MPC8360EMDS_XX_HOST_33_config
To make u-boot support PCI slave 66M :
1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
- 2) Make MPC8360EMDS_SLAVE_config
+ 2) Make MPC8360EMDS_XX_SLAVE_config
+ (where XX is:
+ 33 - 33.33MHz oscillator
+ 66 - 66MHz oscillator)
5. Downloading and Flashing Images