drivers: spmi: msm: add support for PMIC Arbiter V2

[karo-tx-uboot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index 4f49bfddb861afdc16c8679b42ea30550a504adb..761d0b3e85b4caee90e8aa798a81fcfd322c593d 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,3 +1,7 @@
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
 obj-$(CONFIG_$(SPL_)DM)                += core/
 obj-$(CONFIG_$(SPL_)CLK)       += clk/
 obj-$(CONFIG_$(SPL_)LED)       += led/
@@ -6,22 +10,24 @@ obj-$(CONFIG_$(SPL_)RAM)     += ram/
 
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
-obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
-obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
+obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
-obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
@@ -32,9 +38,26 @@ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+endif
+
+ifdef CONFIG_TPL_BUILD
+
+obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
+obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/
+
+endif
 
-else
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
+obj-y += adc/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
@@ -46,8 +69,12 @@ obj-y += hwmon/
 obj-y += misc/
 obj-y += pcmcia/
 obj-y += dfu/
+obj-$(CONFIG_X86) += pch/
+obj-y += phy/marvell/
 obj-y += rtc/
 obj-y += sound/
+obj-y += spmi/
+obj-y += sysreset/
 obj-y += timer/
 obj-y += tpm/
 obj-y += twserial/
@@ -55,12 +82,15 @@ obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
 obj-$(CONFIG_U_QE) += qe/
+obj-y += mailbox/
 obj-y += memory/
 obj-y += pwm/
+obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += soc/
 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
 
+obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 endif