#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
+#include <linux/interrupt.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
bool clk_enabled;
u32 init_speed;
+ int irq;
+ u8 irq_polarity;
#ifdef CONFIG_PM_SLEEP
struct hci_uart *hu;
};
/* List of BCM BT UART devices */
-static DEFINE_SPINLOCK(bcm_device_list_lock);
+static DEFINE_MUTEX(bcm_device_lock);
static LIST_HEAD(bcm_device_list);
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
clock.type = BCM_UART_CLOCK_48MHZ;
- BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+ bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
/* This Broadcom specific command changes the UART's controller
* clock for baud rate > 3000000.
skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
- BT_ERR("%s: BCM: failed to write clock command (%d)",
- hdev->name, err);
+ bt_dev_err(hdev, "BCM: failed to write clock (%d)",
+ err);
return err;
}
kfree_skb(skb);
}
- BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+ bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
param.zero = cpu_to_le16(0);
param.baud_rate = cpu_to_le32(speed);
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
- BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
- hdev->name, err);
+ bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
+ err);
return err;
}
return 0;
}
-/* bcm_device_exists should be protected by bcm_device_list_lock */
+/* bcm_device_exists should be protected by bcm_device_lock */
static bool bcm_device_exists(struct bcm_device *device)
{
struct list_head *p;
if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
clk_enable(dev->clk);
- gpiod_set_value_cansleep(dev->shutdown, powered);
- gpiod_set_value_cansleep(dev->device_wakeup, powered);
+ gpiod_set_value(dev->shutdown, powered);
+ gpiod_set_value(dev->device_wakeup, powered);
if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
clk_disable(dev->clk);
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static irqreturn_t bcm_host_wake(int irq, void *data)
+{
+ struct bcm_device *bdev = data;
+
+ bt_dev_dbg(bdev, "Host wake IRQ");
+
+ return IRQ_HANDLED;
+}
+
+static int bcm_request_irq(struct bcm_data *bcm)
+{
+ struct bcm_device *bdev = bcm->dev;
+ int err = 0;
+
+ /* If this is not a platform device, do not enable PM functionalities */
+ mutex_lock(&bcm_device_lock);
+ if (!bcm_device_exists(bdev)) {
+ err = -ENODEV;
+ goto unlock;
+ }
+
+ if (bdev->irq > 0) {
+ err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
+ bcm_host_wake, IRQF_TRIGGER_RISING,
+ "host_wake", bdev);
+ if (err)
+ goto unlock;
+
+ device_init_wakeup(&bdev->pdev->dev, true);
+ }
+
+unlock:
+ mutex_unlock(&bcm_device_lock);
+
+ return err;
+}
+
+static const struct bcm_set_sleep_mode default_sleep_params = {
+ .sleep_mode = 1, /* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
+ .idle_host = 2, /* idle threshold HOST, in 300ms */
+ .idle_dev = 2, /* idle threshold device, in 300ms */
+ .bt_wake_active = 1, /* BT_WAKE active mode: 1 = high, 0 = low */
+ .host_wake_active = 0, /* HOST_WAKE active mode: 1 = high, 0 = low */
+ .allow_host_sleep = 1, /* Allow host sleep in SCO flag */
+ .combine_modes = 0, /* Combine sleep and LPM flag */
+ .tristate_control = 0, /* Allow tri-state control of UART tx flag */
+ /* Irrelevant USB flags */
+ .usb_auto_sleep = 0,
+ .usb_resume_timeout = 0,
+ .pulsed_host_wake = 0,
+ .break_to_host = 0
+};
+
+static int bcm_setup_sleep(struct hci_uart *hu)
+{
+ struct bcm_data *bcm = hu->priv;
+ struct sk_buff *skb;
+ struct bcm_set_sleep_mode sleep_params = default_sleep_params;
+
+ sleep_params.host_wake_active = !bcm->dev->irq_polarity;
+
+ skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
+ &sleep_params, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
+
+ return 0;
+}
+#else
+static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
+#endif
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
struct list_head *p;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
if (!bcm)
hu->priv = bcm;
- spin_lock(&bcm_device_list_lock);
+ mutex_lock(&bcm_device_lock);
list_for_each(p, &bcm_device_list) {
struct bcm_device *dev = list_entry(p, struct bcm_device, list);
#ifdef CONFIG_PM_SLEEP
dev->hu = hu;
#endif
+ bcm_gpio_set_power(bcm->dev, true);
break;
}
}
- if (bcm->dev)
- bcm_gpio_set_power(bcm->dev, true);
-
- spin_unlock(&bcm_device_list_lock);
+ mutex_unlock(&bcm_device_lock);
return 0;
}
static int bcm_close(struct hci_uart *hu)
{
struct bcm_data *bcm = hu->priv;
+ struct bcm_device *bdev = bcm->dev;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
/* Protect bcm->dev against removal of the device or driver */
- spin_lock(&bcm_device_list_lock);
- if (bcm_device_exists(bcm->dev)) {
- bcm_gpio_set_power(bcm->dev, false);
+ mutex_lock(&bcm_device_lock);
+ if (bcm_device_exists(bdev)) {
+ bcm_gpio_set_power(bdev, false);
#ifdef CONFIG_PM_SLEEP
- bcm->dev->hu = NULL;
+ if (device_can_wakeup(&bdev->pdev->dev)) {
+ devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
+ device_init_wakeup(&bdev->pdev->dev, false);
+ }
+
+ bdev->hu = NULL;
#endif
}
- spin_unlock(&bcm_device_list_lock);
+ mutex_unlock(&bcm_device_lock);
skb_queue_purge(&bcm->txq);
kfree_skb(bcm->rx_skb);
{
struct bcm_data *bcm = hu->priv;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
skb_queue_purge(&bcm->txq);
static int bcm_setup(struct hci_uart *hu)
{
+ struct bcm_data *bcm = hu->priv;
char fw_name[64];
const struct firmware *fw;
unsigned int speed;
int err;
- BT_DBG("hu %p", hu);
+ bt_dev_dbg(hu->hdev, "hu %p", hu);
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
err = request_firmware(&fw, fw_name, &hu->hdev->dev);
if (err < 0) {
- BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+ bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
return 0;
}
err = btbcm_patchram(hu->hdev, fw);
if (err) {
- BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+ bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
goto finalize;
}
release_firmware(fw);
err = btbcm_finalize(hu->hdev);
+ if (err)
+ return err;
+
+ err = bcm_request_irq(bcm);
+ if (!err)
+ err = bcm_setup_sleep(hu);
return err;
}
bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
if (IS_ERR(bcm->rx_skb)) {
int err = PTR_ERR(bcm->rx_skb);
- BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
bcm->rx_skb = NULL;
return err;
}
{
struct bcm_data *bcm = hu->priv;
- BT_DBG("hu %p skb %p", hu, skb);
+ bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
static int bcm_suspend(struct device *dev)
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+ int error;
- BT_DBG("suspend (%p): is_suspended %d", bdev, bdev->is_suspended);
+ bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
+
+ mutex_lock(&bcm_device_lock);
+
+ if (!bdev->hu)
+ goto unlock;
if (!bdev->is_suspended) {
hci_uart_set_flow_control(bdev->hu, true);
/* Suspend the device */
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, false);
- BT_DBG("suspend, delaying 15 ms");
+ bt_dev_dbg(bdev, "suspend, delaying 15 ms");
mdelay(15);
}
+ if (device_may_wakeup(&bdev->pdev->dev)) {
+ error = enable_irq_wake(bdev->irq);
+ if (!error)
+ bt_dev_dbg(bdev, "BCM irq: enabled");
+ }
+
+unlock:
+ mutex_unlock(&bcm_device_lock);
+
return 0;
}
{
struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
- BT_DBG("resume (%p): is_suspended %d", bdev, bdev->is_suspended);
+ bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
+
+ mutex_lock(&bcm_device_lock);
+
+ if (!bdev->hu)
+ goto unlock;
+
+ if (device_may_wakeup(&bdev->pdev->dev)) {
+ disable_irq_wake(bdev->irq);
+ bt_dev_dbg(bdev, "BCM irq: disabled");
+ }
if (bdev->device_wakeup) {
gpiod_set_value(bdev->device_wakeup, true);
- BT_DBG("resume, delaying 15 ms");
+ bt_dev_dbg(bdev, "resume, delaying 15 ms");
mdelay(15);
}
hci_uart_set_flow_control(bdev->hu, false);
}
+unlock:
+ mutex_unlock(&bcm_device_lock);
+
return 0;
}
#endif
static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+static const struct acpi_gpio_params host_wakeup_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
{ "device-wakeup-gpios", &device_wakeup_gpios, 1 },
{ "shutdown-gpios", &shutdown_gpios, 1 },
+ { "host-wakeup-gpios", &host_wakeup_gpios, 1 },
{ },
};
static int bcm_resource(struct acpi_resource *ares, void *data)
{
struct bcm_device *dev = data;
-
- if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
- struct acpi_resource_uart_serialbus *sb;
-
+ struct acpi_resource_extended_irq *irq;
+ struct acpi_resource_gpio *gpio;
+ struct acpi_resource_uart_serialbus *sb;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ irq = &ares->data.extended_irq;
+ dev->irq_polarity = irq->polarity;
+ break;
+
+ case ACPI_RESOURCE_TYPE_GPIO:
+ gpio = &ares->data.gpio;
+ if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
+ dev->irq_polarity = gpio->polarity;
+ break;
+
+ case ACPI_RESOURCE_TYPE_SERIAL_BUS:
sb = &ares->data.uart_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
dev->init_speed = sb->default_baud_rate;
+ break;
+
+ default:
+ break;
}
/* Always tell the ACPI core to skip this resource */
if (IS_ERR(dev->shutdown))
return PTR_ERR(dev->shutdown);
+ /* IRQ can be declared in ACPI table as Interrupt or GpioInt */
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq <= 0) {
+ struct gpio_desc *gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
+ GPIOD_IN);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+
+ dev->irq = gpiod_to_irq(gpio);
+ }
+
+ dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);
+
/* Make sure at-least one of the GPIO is defined and that
* a name is specified for this instance
*/
dev_info(&pdev->dev, "%s device registered.\n", dev->name);
/* Place this instance on the device list */
- spin_lock(&bcm_device_list_lock);
+ mutex_lock(&bcm_device_lock);
list_add_tail(&dev->list, &bcm_device_list);
- spin_unlock(&bcm_device_list_lock);
+ mutex_unlock(&bcm_device_lock);
bcm_gpio_set_power(dev, false);
{
struct bcm_device *dev = platform_get_drvdata(pdev);
- spin_lock(&bcm_device_list_lock);
+ mutex_lock(&bcm_device_lock);
list_del(&dev->list);
- spin_unlock(&bcm_device_list_lock);
+ mutex_unlock(&bcm_device_lock);
acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
projects / karo-tx-linux.git / blobdiff