/*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/of.h>
#include <linux/bitops.h>
#include <linux/pm.h>
-
-#ifdef CONFIG_ARM
-#include <asm/bug.h>
-#include <asm/signal.h>
-#endif
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#define ARB_ERR_CAP_CLEAR (1 << 0)
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
-#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
-#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
- ARB_ERR_CAP_DATA,
ARB_ERR_CAP_STATUS,
ARB_ERR_CAP_MASTER,
};
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
- [ARB_ERR_CAP_DATA] = 0x0cc,
[ARB_ERR_CAP_STATUS] = 0x0d0,
[ARB_ERR_CAP_MASTER] = -1,
};
+static const int gisb_offsets_bcm7278[] = {
+ [ARB_TIMER] = 0x008,
+ [ARB_ERR_CAP_CLR] = 0x7f8,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x7e0,
+ [ARB_ERR_CAP_STATUS] = 0x7f0,
+ [ARB_ERR_CAP_MASTER] = 0x7f4,
+};
+
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
- [ARB_ERR_CAP_DATA] = 0x0d0,
[ARB_ERR_CAP_STATUS] = 0x0d4,
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
- [ARB_ERR_CAP_DATA] = 0x170,
[ARB_ERR_CAP_STATUS] = 0x174,
[ARB_ERR_CAP_MASTER] = 0x178,
};
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
- [ARB_ERR_CAP_DATA] = 0x7f0,
[ARB_ERR_CAP_STATUS] = 0x7f4,
[ARB_ERR_CAP_MASTER] = 0x7f8,
};
{
int offset = gdev->gisb_offsets[reg];
- /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
- if (offset == -1)
- return 1;
+ if (offset < 0) {
+ /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+ if (reg == ARB_ERR_CAP_MASTER)
+ return 1;
+ else
+ return 0;
+ }
if (gdev->big_endian)
return ioread32be(gdev->base + offset);
return ioread32(gdev->base + offset);
}
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+ u64 value;
+
+ value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
+ value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+ return value;
+}
+
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
return;
if (gdev->big_endian)
- iowrite32be(val, gdev->base + reg);
+ iowrite32be(val, gdev->base + offset);
else
- iowrite32(val, gdev->base + reg);
+ iowrite32(val, gdev->base + offset);
}
static ssize_t gisb_arb_get_timeout(struct device *dev,
const char *reason)
{
u32 cap_status;
- unsigned long arb_addr;
+ u64 arb_addr;
u32 master;
const char *m_name;
char m_fmt[11];
return 1;
/* Read the address and master */
- arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
- arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+ arb_addr = gisb_read_address(gdev);
master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
m_name = m_fmt;
}
- pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+ pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
__func__, reason, arb_addr,
cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
return 0;
}
-#ifdef CONFIG_ARM
-static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- int ret = 0;
- struct brcmstb_gisb_arb_device *gdev;
-
- /* iterate over each GISB arb registered handlers */
- list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
- ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return ret;
-}
-#endif
-
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
{
return IRQ_HANDLED;
}
+/*
+ * Dump out gisb errors on die or panic.
+ */
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+ void *p);
+
+static struct notifier_block gisb_die_notifier = {
+ .notifier_call = dump_gisb_error,
+};
+
+static struct notifier_block gisb_panic_notifier = {
+ .notifier_call = dump_gisb_error,
+};
+
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+ void *p)
+{
+ struct brcmstb_gisb_arb_device *gdev;
+ const char *reason = "panic";
+
+ if (self == &gisb_die_notifier)
+ reason = "die";
+
+ /* iterate over each GISB arb registered handlers */
+ list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
+ brcmstb_gisb_arb_decode_addr(gdev, reason);
+
+ return NOTIFY_DONE;
+}
+
static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
gisb_arb_get_timeout, gisb_arb_set_timeout);
{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+ { .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
{ },
};
list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
-#ifdef CONFIG_ARM
- hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
- "imprecise external abort");
-#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
+ if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
+ register_die_notifier(&gisb_die_notifier);
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &gisb_panic_notifier);
+ }
+
dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
gdev->base, timeout_irq, tea_irq);
projects / karo-tx-linux.git / blobdiff