struct intel_plane *intel_plane;
int pipe = intel_crtc->pipe;
+ if (!intel_crtc->active)
+ return;
+
intel_crtc_wait_for_pending_flips(crtc);
intel_pre_disable_primary(crtc);
struct drm_connector *connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- /* crtc should still be enabled when we disable it. */
- WARN_ON(!crtc->state->enable);
-
intel_crtc_disable_planes(crtc);
dev_priv->display.crtc_disable(crtc);
dev_priv->display.off(crtc);
int pipe = pipe_config->cpu_transcoder;
enum dpio_channel port = vlv_pipe_to_channel(pipe);
intel_clock_t clock;
- u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
+ u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
int refclk = 100000;
mutex_lock(&dev_priv->sb_lock);
pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
+ pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
- clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
+ clock.m2 = (pll_dw0 & 0xff) << 22;
+ if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
+ clock.m2 |= pll_dw2 & 0x3fffff;
clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
goto encoder_retry;
}
- pipe_config->dither = pipe_config->pipe_bpp != base_bpp;
+ /* Dithering seems to not pass-through bits correctly when it should, so
+ * only enable it on 6bpc panels. */
+ pipe_config->dither = pipe_config->pipe_bpp == 6*3;
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
continue;
if (!crtc_state->enable) {
- intel_crtc_disable(crtc);
+ if (crtc->state->enable)
+ intel_crtc_disable(crtc);
} else if (crtc->state->enable) {
intel_crtc_disable_planes(crtc);
dev_priv->display.crtc_disable(crtc);
return 0;
}
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
- struct intel_plane_state *plane_state =
- to_intel_plane_state(crtc->primary->state);
-
- return plane_state->visible;
-}
-
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
struct intel_crtc_state *pipe_config;
- bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
intel_update_pipe_size(to_intel_crtc(set->crtc));
- primary_plane_was_visible = primary_plane_visible(set->crtc);
-
ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
- if (ret == 0 &&
- pipe_config->base.enable &&
- pipe_config->base.planes_changed &&
- !needs_modeset(&pipe_config->base)) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (ret == 0 && !primary_plane_was_visible &&
- primary_plane_visible(set->crtc)) {
- WARN_ON(!intel_crtc->active);
- intel_post_enable_primary(set->crtc);
- }
-
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
- }
-
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
if (ret)
return ret;
- if (intel_crtc->active) {
+ if (crtc_state ? crtc_state->base.active : intel_crtc->active) {
struct intel_plane_state *old_state =
to_intel_plane_state(plane->state);
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
+
+ if (crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.post_enable_primary = true;
}
+ /*
+ * FIXME: Actually if we will still have any other plane enabled
+ * on the pipe we could let IPS enabled still, but for
+ * now lets consider that when we make primary invisible
+ * by setting DSPCNTR to 0 on update_primary_plane function
+ * IPS needs to be disable.
+ */
+ if (!state->visible || !fb)
+ intel_crtc->atomic.disable_ips = true;
+
+ if (!state->visible && old_state->visible &&
+ crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.pre_disable_primary = true;
+
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
if (intel_crtc->atomic.disable_fbc)
intel_fbc_disable(dev);
+ if (intel_crtc->atomic.disable_ips)
+ hsw_disable_ips(intel_crtc);
+
if (intel_crtc->atomic.pre_disable_primary)
intel_pre_disable_primary(crtc);