/*
- * linux/drivers/ide/pci/cmd64x.c Version 1.47 Mar 19, 2007
+ * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007
*
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
#define ARTTIM23_DIS_RA2 0x04
#define ARTTIM23_DIS_RA3 0x08
#define ARTTIM23_INTR_CH1 0x10
-#define ARTTIM2 0x57
-#define ARTTIM3 0x57
-#define DRWTIM23 0x58
#define DRWTIM2 0x58
#define BRST 0x59
#define DRWTIM3 0x5b
u8 reg72 = 0, reg73 = 0; /* primary */
u8 reg7a = 0, reg7b = 0; /* secondary */
u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
- u8 rev = 0;
p += sprintf(p, "\nController: %d\n", index);
p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
(void) pci_read_config_byte(dev, UDIDETCR1, ®7b);
/* PCI0643/6 originally didn't have the primary channel enable bit */
- (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
- (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3))
+ (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
reg51 |= CNTRL_ENA_1ST;
p += sprintf(p, "---------------- Primary Channel "
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- ide_pio_data_t pio;
+ unsigned int cycle_time;
u8 pio_mode, setup_count, arttim = 0;
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio);
- cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)%s\n",
- drive->name, mode_wanted, pio_mode, pio.cycle_time,
- pio.overridden ? " (overriding vendor mode)" : "");
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
+ cycle_time = ide_pio_cycle_time(drive, pio_mode);
- program_cycle_times(drive, pio.cycle_time,
+ cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
+ drive->name, mode_wanted, pio_mode, cycle_time);
+
+ program_cycle_times(drive, cycle_time,
ide_pio_timings[pio_mode].active_time);
setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
return ide_config_drive_speed(drive, speed);
}
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
- u8 speed = ide_max_dma_mode(drive);
-
- if (!speed)
- return 0;
-
- if (cmd64x_tune_chipset(drive, speed))
- return 0;
-
- return ide_dma_enable(drive);
-}
-
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
{
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
{
- u32 class_rev = 0;
u8 mrdmode = 0;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
+ if (dev->device == PCI_DEVICE_ID_CMD_646) {
+ u8 rev = 0;
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_643:
- break;
- case PCI_DEVICE_ID_CMD_646:
- printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev);
- switch(class_rev) {
- case 0x07:
- case 0x05:
- printk("UltraDMA Capable");
- break;
- case 0x03:
- printk("MultiWord DMA Force Limited");
- break;
- case 0x01:
- default:
- printk("MultiWord DMA Limited, IRQ workaround enabled");
- break;
- }
- printk("\n");
- break;
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_649:
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ switch (rev) {
+ case 0x07:
+ case 0x05:
+ printk("%s: UltraDMA capable", name);
break;
+ case 0x03:
default:
+ printk("%s: MultiWord DMA force limited", name);
+ break;
+ case 0x01:
+ printk("%s: MultiWord DMA limited, "
+ "IRQ workaround enabled\n", name);
break;
+ }
}
/* Set a good latency timer and cache line size value. */
(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
/* FIXME: pci_set_master() to ensure a good latency timer value */
- /* Setup interrupts. */
- (void) pci_read_config_byte(dev, MRDMODE, &mrdmode);
- mrdmode &= ~(0x30);
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode);
-
- /* Use MEMORY READ LINE for reads.
- * NOTE: Although not mentioned in the PCI0646U specs,
- * these bits are write only and won't be read
- * back as set or not. The PCI0646U2 specs clarify
- * this point.
+ /*
+ * Enable interrupts, select MEMORY READ LINE for reads.
+ *
+ * NOTE: although not mentioned in the PCI0646U specs,
+ * bits 0-1 are write only and won't be read back as
+ * set or not -- PCI0646U2 specs clarify this point.
*/
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02);
-
- /* Set reasonable active/recovery/address-setup values. */
- (void) pci_write_config_byte(dev, ARTTIM0, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM0, 0x3f);
- (void) pci_write_config_byte(dev, ARTTIM1, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM1, 0x3f);
-#ifdef __i386__
- (void) pci_write_config_byte(dev, ARTTIM23, 0x1c);
-#else
- (void) pci_write_config_byte(dev, ARTTIM23, 0x5c);
-#endif
- (void) pci_write_config_byte(dev, DRWTIM23, 0x3f);
- (void) pci_write_config_byte(dev, DRWTIM3, 0x3f);
-#ifdef CONFIG_PPC
- (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0);
-#endif /* CONFIG_PPC */
+ (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30;
+ (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
return 0;
}
-static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif)
+static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
{
- u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01;
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
- switch(hwif->pci_dev->device) {
- case PCI_DEVICE_ID_CMD_643:
- case PCI_DEVICE_ID_CMD_646:
- return ata66;
- default:
- break;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_CMD_648:
+ case PCI_DEVICE_ID_CMD_649:
+ pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
+ return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+ default:
+ return ATA_CBL_PATA40;
}
- pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66);
- return (ata66 & mask) ? 1 : 0;
}
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- unsigned int class_rev;
+ u8 rev = 0;
- hwif->autodma = 0;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
hwif->tuneproc = &cmd64x_tune_drive;
hwif->speedproc = &cmd64x_tune_chipset;
if (!hwif->dma_base)
return;
- hwif->atapi_dma = 1;
-
+ hwif->atapi_dma = 1;
+ hwif->mwdma_mask = 0x07;
hwif->ultra_mask = hwif->cds->udma_mask;
/*
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
- if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5)
+ if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5)
hwif->ultra_mask = 0x00;
- hwif->mwdma_mask = 0x07;
-
hwif->ide_dma_check = &cmd64x_config_drive_for_dma;
- if (!(hwif->udma_four))
- hwif->udma_four = ata66_cmd64x(hwif);
- switch(dev->device) {
+ if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+ hwif->cbl = ata66_cmd64x(hwif);
+
+ switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
alt_irq_bits:
break;
case PCI_DEVICE_ID_CMD_646:
hwif->chipset = ide_cmd646;
- if (class_rev == 0x01) {
+ if (rev == 0x01) {
hwif->ide_dma_end = &cmd646_1_ide_dma_end;
break;
- } else if (class_rev >= 0x03)
+ } else if (rev >= 0x03)
goto alt_irq_bits;
/* fall thru */
default:
break;
}
-
if (!noautodma)
hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
+ hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
}
static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
{
- u8 rev = 0;
-
/*
* The original PCI0646 didn't have the primary channel enable bit,
* it appeared starting with PCI0646U (i.e. revision ID 3).
*/
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev < 3)
+ if (dev->revision < 3)
d->enablebits[0].reg = 0;
return ide_setup_pci_device(dev, d);
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
.name = "CMD646",
.init_setup = init_setup_cmd646,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 2 */
.name = "CMD648",
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
.name = "CMD649",
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x3f, /* udma0-5 */
}
};
projects / karo-tx-linux.git / blobdiff