static void sdhci_finish_data(struct sdhci_host *);
-static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
static void sdhci_finish_command(struct sdhci_host *);
static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
static void sdhci_tuning_timer(unsigned long data);
u16 mode;
struct mmc_data *data = cmd->data;
- if (data == NULL)
+ if (data == NULL) {
+ /* clear Auto CMD settings for no data CMDs */
+ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
return;
+ }
WARN_ON(!host->data);
tasklet_schedule(&host->finish_tasklet);
}
-static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
u32 mask;
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
}
+EXPORT_SYMBOL_GPL(sdhci_send_command);
static void sdhci_finish_command(struct sdhci_host *host)
{
mmc->card->type == MMC_TYPE_MMC ?
MMC_SEND_TUNING_BLOCK_HS200 :
MMC_SEND_TUNING_BLOCK;
+
+ /* Here we need to set the host->mrq to NULL,
+ * in case the pending finish_tasklet
+ * finishes it incorrectly.
+ */
+ host->mrq = NULL;
+
spin_unlock_irqrestore(&host->lock, flags);
sdhci_execute_tuning(mmc, tuning_opcode);
spin_lock_irqsave(&host->lock, flags);
}
if (host->version >= SDHCI_SPEC_300 &&
- (ios->power_mode == MMC_POWER_UP))
+ (ios->power_mode == MMC_POWER_UP) &&
+ !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
sdhci_enable_preset_value(host, false);
sdhci_set_clock(host, ios->clock);
return 0;
}
+ if (host->ops->platform_execute_tuning) {
+ spin_unlock(&host->lock);
+ enable_irq(host->irq);
+ err = host->ops->platform_execute_tuning(host, opcode);
+ sdhci_runtime_pm_put(host);
+ return err;
+ }
+
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
/*
if (!tuning_loop_counter || !timeout) {
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ err = -EIO;
} else {
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
pr_info(DRIVER_NAME ": Tuning procedure"
result = IRQ_HANDLED;
intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+
+ /*
+ * If we know we'll call the driver to signal SDIO IRQ, disregard
+ * further indications of Card Interrupt in the status to avoid a
+ * needless loop.
+ */
+ if (cardint)
+ intmask &= ~SDHCI_INT_CARD_INT;
if (intmask && --max_loops)
goto again;
out:
int sdhci_suspend_host(struct sdhci_host *host)
{
- int ret;
-
if (host->ops->platform_suspend)
host->ops->platform_suspend(host);
host->flags &= ~SDHCI_NEEDS_RETUNING;
}
- ret = mmc_suspend_host(host->mmc);
- if (ret) {
- if (host->flags & SDHCI_USING_RETUNING_TIMER) {
- host->flags |= SDHCI_NEEDS_RETUNING;
- mod_timer(&host->tuning_timer, jiffies +
- host->tuning_count * HZ);
- }
-
- sdhci_enable_card_detection(host);
-
- return ret;
- }
-
if (!device_may_wakeup(mmc_dev(host->mmc))) {
sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
free_irq(host->irq, host);
sdhci_enable_irq_wakeups(host);
enable_irq_wake(host->irq);
}
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(sdhci_suspend_host);
int sdhci_resume_host(struct sdhci_host *host)
{
- int ret;
+ int ret = 0;
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
mmiowb();
}
- ret = mmc_resume_host(host->mmc);
sdhci_enable_card_detection(host);
if (host->ops->platform_resume)
/* SD3.0: SDR104 is supported so (for eMMC) the caps2
* field can be promoted to support HS200.
*/
- mmc->caps2 |= MMC_CAP2_HS200;
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+ mmc->caps2 |= MMC_CAP2_HS200;
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;