static char ixgbe_default_device_descr[] =
"Intel(R) 10 Gigabit Network Connection";
#endif
-#define DRV_VERSION "3.13.10-k"
+#define DRV_VERSION "3.15.1-k"
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
"Copyright (c) 1999-2013 Intel Corporation.";
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 },
return 0;
}
+/**
+ * ixgbe_check_from_parent - Determine whether PCIe info should come from parent
+ * @hw: hw specific details
+ *
+ * This function is used by probe to determine whether a device's PCI-Express
+ * bandwidth details should be gathered from the parent bus instead of from the
+ * device. Used to ensure that various locations all have the correct device ID
+ * checks.
+ */
+static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw)
+{
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
+ int expected_gts)
+{
+ int max_gts = 0;
+ enum pci_bus_speed speed = PCI_SPEED_UNKNOWN;
+ enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
+ struct pci_dev *pdev;
+
+ /* determine whether to use the the parent device
+ */
+ if (ixgbe_pcie_from_parent(&adapter->hw))
+ pdev = adapter->pdev->bus->parent->self;
+ else
+ pdev = adapter->pdev;
+
+ if (pcie_get_minimum_link(pdev, &speed, &width) ||
+ speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
+ e_dev_warn("Unable to determine PCI Express bandwidth.\n");
+ return;
+ }
+
+ switch (speed) {
+ case PCIE_SPEED_2_5GT:
+ /* 8b/10b encoding reduces max throughput by 20% */
+ max_gts = 2 * width;
+ break;
+ case PCIE_SPEED_5_0GT:
+ /* 8b/10b encoding reduces max throughput by 20% */
+ max_gts = 4 * width;
+ break;
+ case PCIE_SPEED_8_0GT:
+ /* 128b/130b encoding only reduces throughput by 1% */
+ max_gts = 8 * width;
+ break;
+ default:
+ e_dev_warn("Unable to determine PCI Express bandwidth.\n");
+ return;
+ }
+
+ e_dev_info("PCI Express bandwidth of %dGT/s available\n",
+ max_gts);
+ e_dev_info("(Speed:%s, Width: x%d, Encoding Loss:%s)\n",
+ (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" :
+ speed == PCIE_SPEED_5_0GT ? "5.0GT/s" :
+ speed == PCIE_SPEED_2_5GT ? "2.5GT/s" :
+ "Unknown"),
+ width,
+ (speed == PCIE_SPEED_2_5GT ? "20%" :
+ speed == PCIE_SPEED_5_0GT ? "20%" :
+ speed == PCIE_SPEED_8_0GT ? "N/a" :
+ "Unknown"));
+
+ if (max_gts < expected_gts) {
+ e_dev_warn("This is not sufficient for optimal performance of this card.\n");
+ e_dev_warn("For optimal performance, at least %dGT/s of bandwidth is required.\n",
+ expected_gts);
+ e_dev_warn("A slot with more lanes and/or higher speed is suggested.\n");
+ }
+}
+
static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
{
if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
hw->addr_ctrl.user_set_promisc = true;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE);
- /* don't hardware filter vlans in promisc mode */
- ixgbe_vlan_filter_disable(adapter);
+ /* Only disable hardware filter vlans in promiscuous mode
+ * if SR-IOV and VMDQ are disabled - otherwise ensure
+ * that hardware VLAN filters remain enabled.
+ */
+ if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
+ IXGBE_FLAG_SRIOV_ENABLED)))
+ ixgbe_vlan_filter_disable(adapter);
+ else
+ ixgbe_vlan_filter_enable(adapter);
} else {
if (netdev->flags & IFF_ALLMULTI) {
fctrl |= IXGBE_FCTRL_MPE;
case ixgbe_phy_sfp_passive_unknown:
case ixgbe_phy_sfp_active_unknown:
case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_qsfp_passive_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
return true;
case ixgbe_phy_nl:
if (hw->mac.type == ixgbe_mac_82598EB)
if (hw->mac.san_mac_rar_index)
hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0));
- if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED)
+ if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
ixgbe_ptp_reset(adapter);
}
ixgbe_pbthresh_setup(adapter);
hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
hw->fc.send_xon = true;
- hw->fc.disable_fc_autoneg =
- (ixgbe_device_supports_autoneg_fc(hw) == 0) ? false : true;
+ hw->fc.disable_fc_autoneg = ixgbe_device_supports_autoneg_fc(hw);
#ifdef CONFIG_PCI_IOV
/* assign number of SR-IOV VFs */
return retval;
#endif
+ if (hw->mac.ops.stop_link_on_d3)
+ hw->mac.ops.stop_link_on_d3(hw);
+
if (wufc) {
ixgbe_set_rx_mode(netdev);
adapter->last_rx_ptp_check = jiffies;
- if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED)
+ if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
ixgbe_ptp_start_cyclecounter(adapter);
e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
- if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED)
+ if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
ixgbe_ptp_start_cyclecounter(adapter);
e_info(drv, "NIC Link is Down\n");
!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
return;
- /* concurent i2c reads are not supported */
- if (test_bit(__IXGBE_READ_I2C, &adapter->state))
- return;
-
/* someone else is in init, wait until next service event */
if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
return;
ixgbe_fdir_reinit_subtask(adapter);
ixgbe_check_hang_subtask(adapter);
- if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) {
+ if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) {
ixgbe_ptp_overflow_check(adapter);
ixgbe_ptp_rx_hang(adapter);
}
.ndo_bridge_getlink = ixgbe_ndo_bridge_getlink,
};
+/**
+ * ixgbe_enumerate_functions - Get the number of ports this device has
+ * @adapter: adapter structure
+ *
+ * This function enumerates the phsyical functions co-located on a single slot,
+ * in order to determine how many ports a device has. This is most useful in
+ * determining the required GT/s of PCIe bandwidth necessary for optimal
+ * performance.
+ **/
+static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct list_head *entry;
+ int physfns = 0;
+
+ /* Some cards can not use the generic count PCIe functions method, and
+ * so must be hardcoded to the correct value.
+ */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ physfns = 4;
+ break;
+ default:
+ list_for_each(entry, &adapter->pdev->bus_list) {
+ struct pci_dev *pdev =
+ list_entry(entry, struct pci_dev, bus_list);
+ /* don't count virtual functions */
+ if (!pdev->is_virtfn)
+ physfns++;
+ }
+ }
+
+ return physfns;
+}
+
/**
* ixgbe_wol_supported - Check whether device supports WoL
* @hw: hw specific details
struct ixgbe_hw *hw;
const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
static int cards_found;
- int i, err, pci_using_dac;
+ int i, err, pci_using_dac, expected_gts;
unsigned int indices = MAX_TX_QUEUES;
u8 part_str[IXGBE_PBANUM_LENGTH];
#ifdef IXGBE_FCOE
hw->mac.type == ixgbe_mac_82598EB) {
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- e_dev_err("failed to load because an unsupported SFP+ "
- "module type was detected.\n");
- e_dev_err("Reload the driver after installing a supported "
- "module.\n");
+ e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported module.\n");
goto err_sw_init;
} else if (err) {
e_dev_err("HW Init failed: %d\n", err);
/* pick up the PCI bus settings for reporting later */
hw->mac.ops.get_bus_info(hw);
- if (hw->device_id == IXGBE_DEV_ID_82599_SFP_SF_QP)
+ if (ixgbe_pcie_from_parent(hw))
ixgbe_get_parent_bus_info(adapter);
/* print bus type/speed/width info */
e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
hw->mac.type, hw->phy.type, part_str);
- if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
- e_dev_warn("PCI-Express bandwidth available for this card is "
- "not sufficient for optimal performance.\n");
- e_dev_warn("For optimal performance a x8 PCI-Express slot "
- "is required.\n");
+ /* calculate the expected PCIe bandwidth required for optimal
+ * performance. Note that some older parts will never have enough
+ * bandwidth due to being older generation PCIe parts. We clamp these
+ * parts to ensure no warning is displayed if it can't be fixed.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ expected_gts = min(ixgbe_enumerate_functions(adapter) * 10, 16);
+ break;
+ default:
+ expected_gts = ixgbe_enumerate_functions(adapter) * 10;
+ break;
}
+ ixgbe_check_minimum_link(adapter, expected_gts);
/* reset the hardware with the new settings */
err = hw->mac.ops.start_hw(hw);
projects / karo-tx-linux.git / blobdiff