]> git.kernelconcepts.de Git - karo-tx-linux.git/blobdiff - drivers/net/ethernet/octeon/octeon_mgmt.c
netdev: octeon_mgmt: Make multi-line comment style consistent.
[karo-tx-linux.git] / drivers / net / ethernet / octeon / octeon_mgmt.c
index ccb1f8172cab67435378464928c107e8db7337e9..5be431c25147d83fa03875dc5d7f47aca396bae2 100644 (file)
@@ -34,8 +34,7 @@
 
 #define OCTEON_MGMT_NAPI_WEIGHT 16
 
-/*
- * Ring sizes that are powers of two allow for more efficient modulo
+/* Ring sizes that are powers of two allow for more efficient modulo
  * opertions.
  */
 #define OCTEON_MGMT_RX_RING_SIZE 512
@@ -431,8 +430,7 @@ good:
                netif_receive_skb(skb);
                rc = 0;
        } else if (re.s.code == RING_ENTRY_CODE_MORE) {
-               /*
-                * Packet split across skbs.  This can happen if we
+               /* Packet split across skbs.  This can happen if we
                 * increase the MTU.  Buffers that are already in the
                 * rx ring can then end up being too small.  As the rx
                 * ring is refilled, buffers sized for the new MTU
@@ -462,8 +460,7 @@ good:
        } else {
                /* Some other error, discard it. */
                dev_kfree_skb_any(skb);
-               /*
-                * Error statistics are accumulated in
+               /* Error statistics are accumulated in
                 * octeon_mgmt_update_rx_stats.
                 */
        }
@@ -590,8 +587,7 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
                cam_mode = 0;
                available_cam_entries = 8;
        } else {
-               /*
-                * One CAM entry for the primary address, leaves seven
+               /* One CAM entry for the primary address, leaves seven
                 * for the secondary addresses.
                 */
                available_cam_entries = 7 - netdev->uc.count;
@@ -663,8 +659,7 @@ static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu)
        struct octeon_mgmt *p = netdev_priv(netdev);
        int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM;
 
-       /*
-        * Limit the MTU to make sure the ethernet packets are between
+       /* Limit the MTU to make sure the ethernet packets are between
         * 64 bytes and 16383 bytes.
         */
        if (size_without_fcs < 64 || size_without_fcs > 16383) {
@@ -1044,8 +1039,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
        }
        if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
                || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
-               /*
-                * Force compensation values, as they are not
+               /* Force compensation values, as they are not
                 * determined properly by HW
                 */
                union cvmx_agl_gmx_drv_ctl drv_ctl;
@@ -1078,8 +1072,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
 
        octeon_mgmt_change_mtu(netdev, netdev->mtu);
 
-       /*
-        * Enable the port HW. Packets are not allowed until
+       /* Enable the port HW. Packets are not allowed until
         * cvmx_mgmt_port_enable() is called.
         */
        mix_ctl.u64 = 0;
@@ -1196,8 +1189,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
        rxx_frm_ctl.u64 = 0;
        rxx_frm_ctl.s.ptp_mode = p->has_rx_tstamp ? 1 : 0;
        rxx_frm_ctl.s.pre_align = 1;
-       /*
-        * When set, disables the length check for non-min sized pkts
+       /* When set, disables the length check for non-min sized pkts
         * with padding in the client data.
         */
        rxx_frm_ctl.s.pad_len = 1;
@@ -1215,8 +1207,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
        rxx_frm_ctl.s.ctl_drp = 1;
        /* Strip off the preamble */
        rxx_frm_ctl.s.pre_strp = 1;
-       /*
-        * This port is configured to send PREAMBLE+SFD to begin every
+       /* This port is configured to send PREAMBLE+SFD to begin every
         * frame.  GMX checks that the PREAMBLE is sent correctly.
         */
        rxx_frm_ctl.s.pre_chk = 1;