* Much better multiple PHY support by Magnus Damm.
* Copyright (c) 2000 Ericsson Radio Systems AB.
*
- * Support for FEC controller of ColdFire/5270/5271/5272/5274/5275/5280/5282.
- * Copyright (c) 2001-2004 Greg Ungerer (gerg@snapgear.com)
+ * Support for FEC controller of ColdFire processors.
+ * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com)
*
* Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
- * Copyright (c) 2004-2005 Macq Electronique SA.
+ * Copyright (c) 2004-2006 Macq Electronique SA.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <asm/pgtable.h>
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
- defined(CONFIG_M5272) || defined(CONFIG_M528x)
+ defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include "fec.h"
(MCF_MBAR + 0x1800),
#elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
(MCF_MBAR + 0x1000),
+#elif defined(CONFIG_M520x)
+ (MCF_MBAR+0x30000),
+#elif defined(CONFIG_M532x)
+ (MCF_MBAR+0xfc030000),
#else
&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
#endif
#define TX_RING_SIZE 16 /* Must be power of two */
#define TX_RING_MOD_MASK 15 /* for this to work */
+#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
+#error "FEC: descriptor ring size constants too large"
+#endif
+
/* Interrupt events/masks.
*/
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
/*
- * The 5270/5271/5280/5282 RX control register also contains maximum frame
+ * The 5270/5271/5280/5282/532x RX control register also contains maximum frame
* size bits. Other FEC hardware does not, so we need to take that into
* account when setting it.
*/
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M532x)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
+ status = bdp->cbd_sc;
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ if (status & BD_ENET_TX_READY) {
/* Ooops. All transmit buffers are full. Bail out.
* This should not happen, since dev->tbusy should be set.
*/
/* Clear all of the status flags.
*/
- bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+ status &= ~BD_ENET_TX_STATS;
/* Set buffer length and buffer pointer.
*/
spin_lock_irq(&fep->lock);
- /* Send it on its way. Tell FEC its ready, interrupt when done,
- * its the last BD of the frame, and to put the CRC on the end.
+ /* Send it on its way. Tell FEC it's ready, interrupt when done,
+ * it's the last BD of the frame, and to put the CRC on the end.
*/
- bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
| BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ bdp->cbd_sc = status;
dev->trans_start = jiffies;
/* Trigger transmission start */
- fecp->fec_x_des_active = 0x01000000;
+ fecp->fec_x_des_active = 0;
/* If this was the last BD in the ring, start at the beginning again.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
+ if (status & BD_ENET_TX_WRAP) {
bdp = fep->tx_bd_base;
} else {
bdp++;
{
struct fec_enet_private *fep;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
fep = netdev_priv(dev);
spin_lock(&fep->lock);
bdp = fep->dirty_tx;
- while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
+ while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
if (bdp == fep->cur_tx && fep->tx_full == 0) break;
skb = fep->tx_skbuff[fep->skb_dirty];
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
BD_ENET_TX_RL | BD_ENET_TX_UN |
BD_ENET_TX_CSL)) {
fep->stats.tx_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
+ if (status & BD_ENET_TX_HB) /* No heartbeat */
fep->stats.tx_heartbeat_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
+ if (status & BD_ENET_TX_LC) /* Late collision */
fep->stats.tx_window_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
+ if (status & BD_ENET_TX_RL) /* Retrans limit */
fep->stats.tx_aborted_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
+ if (status & BD_ENET_TX_UN) /* Underrun */
fep->stats.tx_fifo_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
+ if (status & BD_ENET_TX_CSL) /* Carrier lost */
fep->stats.tx_carrier_errors++;
} else {
fep->stats.tx_packets++;
}
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY)
+ if (status & BD_ENET_TX_READY)
printk("HEY! Enet xmit interrupt and TX_READY.\n");
#endif
/* Deferred means some collisions occurred during transmit,
* but we eventually sent the packet OK.
*/
- if (bdp->cbd_sc & BD_ENET_TX_DEF)
+ if (status & BD_ENET_TX_DEF)
fep->stats.collisions++;
/* Free the sk buffer associated with this last transmit.
/* Update pointer to next buffer descriptor to be transmitted.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp++;
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
ushort pkt_len;
__u8 *data;
+
+#ifdef CONFIG_M532x
+ flush_cache_all();
+#endif
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
*/
bdp = fep->cur_rx;
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
+while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
#ifndef final_version
/* Since we have allocated space to hold a complete frame,
* the last indicator should be set.
*/
- if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
+ if ((status & BD_ENET_RX_LAST) == 0)
printk("FEC ENET: rcv is not +last\n");
#endif
goto rx_processing_done;
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
fep->stats.rx_errors++;
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
/* Frame too long or too short. */
fep->stats.rx_length_errors++;
}
- if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
+ if (status & BD_ENET_RX_NO) /* Frame alignment */
fep->stats.rx_frame_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
- fep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
+ if (status & BD_ENET_RX_CR) /* CRC Error */
fep->stats.rx_crc_errors++;
+ if (status & BD_ENET_RX_OV) /* FIFO overrun */
+ fep->stats.rx_fifo_errors++;
}
/* Report late collisions as a frame error.
* On this error, the BD is closed, but we don't know what we
* have in the buffer. So, just drop this frame on the floor.
*/
- if (bdp->cbd_sc & BD_ENET_RX_CL) {
+ if (status & BD_ENET_RX_CL) {
fep->stats.rx_errors++;
fep->stats.rx_frame_errors++;
goto rx_processing_done;
} else {
skb->dev = dev;
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb,
- (unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len-4, 0);
+ eth_copy_and_sum(skb, data, pkt_len-4, 0);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
/* Clear the status flags for this buffer.
*/
- bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+ status &= ~BD_ENET_RX_STATS;
/* Mark the buffer empty.
*/
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+ status |= BD_ENET_RX_EMPTY;
+ bdp->cbd_sc = status;
/* Update BD pointer to next entry.
*/
- if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ if (status & BD_ENET_RX_WRAP)
bdp = fep->rx_bd_base;
else
bdp++;
* incoming frames. On a heavily loaded network, we should be
* able to keep up at the expense of system resources.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
- } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
+ } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
fep->cur_rx = (cbd_t *)bdp;
#if 0
* our way back to the interrupt return only to come right back
* here.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
}
+/* called from interrupt context */
static void
fec_enet_mii(struct net_device *dev)
{
fep = netdev_priv(dev);
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
+
+ spin_lock(&fep->lock);
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
- return;
+ goto unlock;
}
if (mip->mii_func != NULL)
if ((mip = mii_head) != NULL)
ep->fec_mii_data = mip->mii_regval;
+
+unlock:
+ spin_unlock(&fep->lock);
}
static int
retval = 0;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fep->lock,flags);
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
retval = 1;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&fep->lock,flags);
return(retval);
}
.shutdown = phy_cmd_ks8721bl_shutdown
};
+/* ------------------------------------------------------------------------- */
+/* register definitions for the DP83848 */
+
+#define MII_DP8384X_PHYSTST 16 /* PHY Status Register */
+
+static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
+
+ /* Link up */
+ if (mii_reg & 0x0001) {
+ fep->link = 1;
+ *s |= PHY_STAT_LINK;
+ } else
+ fep->link = 0;
+ /* Status of link */
+ if (mii_reg & 0x0010) /* Autonegotioation complete */
+ *s |= PHY_STAT_ANC;
+ if (mii_reg & 0x0002) { /* 10MBps? */
+ if (mii_reg & 0x0004) /* Full Duplex? */
+ *s |= PHY_STAT_10FDX;
+ else
+ *s |= PHY_STAT_10HDX;
+ } else { /* 100 Mbps? */
+ if (mii_reg & 0x0004) /* Full Duplex? */
+ *s |= PHY_STAT_100FDX;
+ else
+ *s |= PHY_STAT_100HDX;
+ }
+ if (mii_reg & 0x0008)
+ *s |= PHY_STAT_FAULT;
+}
+
+static phy_info_t phy_info_dp83848= {
+ 0x020005c9,
+ "DP83848",
+
+ (const phy_cmd_t []) { /* config */
+ { mk_mii_read(MII_REG_CR), mii_parse_cr },
+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* startup - enable interrupts */
+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* shutdown */
+ { mk_mii_end, }
+ },
+};
+
/* ------------------------------------------------------------------------- */
static phy_info_t const * const phy_info[] = {
&phy_info_qs6612,
&phy_info_am79c874,
&phy_info_ks8721bl,
+ &phy_info_dp83848,
NULL
};
/* ------------------------------------------------------------------------- */
-
+#if !defined(CONFIG_M532x)
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
static irqreturn_t
mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs);
#endif
+#endif
#if defined(CONFIG_M5272)
{
volatile unsigned char *icrp;
volatile unsigned long *imrp;
- int i;
+ int i, ilip;
b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0;
icrp = (volatile unsigned char *) (MCF_IPSBAR + b +
MCFINTC_ICR0);
- for (i = 23; (i < 36); i++)
- icrp[i] = 0x23;
+ for (i = 23, ilip = 0x28; (i < 36); i++)
+ icrp[i] = ilip--;
imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
MCFINTC_IMRH);
/* ------------------------------------------------------------------------- */
+#elif defined(CONFIG_M520x)
+
+/*
+ * Code specific to Coldfire 520x
+ */
+static void __inline__ fec_request_intrs(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int b;
+ static const struct idesc {
+ char *name;
+ unsigned short irq;
+ } *idp, id[] = {
+ { "fec(TXF)", 23 },
+ { "fec(TXB)", 24 },
+ { "fec(TXFIFO)", 25 },
+ { "fec(TXCR)", 26 },
+ { "fec(RXF)", 27 },
+ { "fec(RXB)", 28 },
+ { "fec(MII)", 29 },
+ { "fec(LC)", 30 },
+ { "fec(HBERR)", 31 },
+ { "fec(GRA)", 32 },
+ { "fec(EBERR)", 33 },
+ { "fec(BABT)", 34 },
+ { "fec(BABR)", 35 },
+ { NULL },
+ };
+
+ fep = netdev_priv(dev);
+ b = 64 + 13;
+
+ /* Setup interrupt handlers. */
+ for (idp = id; idp->name; idp++) {
+ if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
+ }
+
+ /* Unmask interrupts at ColdFire interrupt controller */
+ {
+ volatile unsigned char *icrp;
+ volatile unsigned long *imrp;
+
+ icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
+ MCFINTC_ICR0);
+ for (b = 36; (b < 49); b++)
+ icrp[b] = 0x04;
+ imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 +
+ MCFINTC_IMRH);
+ *imrp &= ~0x0001FFF0;
+ }
+ *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0;
+ *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f;
+}
+
+static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+{
+ volatile fec_t *fecp;
+
+ fecp = fep->hwp;
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ * See 5282 manual section 17.5.4.7: MSCR
+ */
+ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fecp->fec_mii_speed = fep->phy_speed;
+
+ fec_restart(dev, 0);
+}
+
+static void __inline__ fec_get_mac(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ volatile fec_t *fecp;
+ unsigned char *iap, tmpaddr[ETH_ALEN];
+
+ fecp = fep->hwp;
+
+ if (FEC_FLASHMAC) {
+ /*
+ * Get MAC address from FLASH.
+ * If it is all 1's or 0's, use the default.
+ */
+ iap = FEC_FLASHMAC;
+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+ iap = fec_mac_default;
+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+ iap = fec_mac_default;
+ } else {
+ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+ iap = &tmpaddr[0];
+ }
+
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+ /* Adjust MAC if using default MAC address */
+ if (iap == fec_mac_default)
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+}
+
+static void __inline__ fec_enable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_disable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_phy_ack_intr(void)
+{
+}
+
+static void __inline__ fec_localhw_setup(void)
+{
+}
+
+static void __inline__ fec_uncache(unsigned long addr)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
+#elif defined(CONFIG_M532x)
+/*
+ * Code specific for M532x
+ */
+static void __inline__ fec_request_intrs(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int b;
+ static const struct idesc {
+ char *name;
+ unsigned short irq;
+ } *idp, id[] = {
+ { "fec(TXF)", 36 },
+ { "fec(TXB)", 37 },
+ { "fec(TXFIFO)", 38 },
+ { "fec(TXCR)", 39 },
+ { "fec(RXF)", 40 },
+ { "fec(RXB)", 41 },
+ { "fec(MII)", 42 },
+ { "fec(LC)", 43 },
+ { "fec(HBERR)", 44 },
+ { "fec(GRA)", 45 },
+ { "fec(EBERR)", 46 },
+ { "fec(BABT)", 47 },
+ { "fec(BABR)", 48 },
+ { NULL },
+ };
+
+ fep = netdev_priv(dev);
+ b = (fep->index) ? 128 : 64;
+
+ /* Setup interrupt handlers. */
+ for (idp = id; idp->name; idp++) {
+ if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ printk("FEC: Could not allocate %s IRQ(%d)!\n",
+ idp->name, b+idp->irq);
+ }
+
+ /* Unmask interrupts */
+ MCF_INTC0_ICR36 = 0x2;
+ MCF_INTC0_ICR37 = 0x2;
+ MCF_INTC0_ICR38 = 0x2;
+ MCF_INTC0_ICR39 = 0x2;
+ MCF_INTC0_ICR40 = 0x2;
+ MCF_INTC0_ICR41 = 0x2;
+ MCF_INTC0_ICR42 = 0x2;
+ MCF_INTC0_ICR43 = 0x2;
+ MCF_INTC0_ICR44 = 0x2;
+ MCF_INTC0_ICR45 = 0x2;
+ MCF_INTC0_ICR46 = 0x2;
+ MCF_INTC0_ICR47 = 0x2;
+ MCF_INTC0_ICR48 = 0x2;
+
+ MCF_INTC0_IMRH &= ~(
+ MCF_INTC_IMRH_INT_MASK36 |
+ MCF_INTC_IMRH_INT_MASK37 |
+ MCF_INTC_IMRH_INT_MASK38 |
+ MCF_INTC_IMRH_INT_MASK39 |
+ MCF_INTC_IMRH_INT_MASK40 |
+ MCF_INTC_IMRH_INT_MASK41 |
+ MCF_INTC_IMRH_INT_MASK42 |
+ MCF_INTC_IMRH_INT_MASK43 |
+ MCF_INTC_IMRH_INT_MASK44 |
+ MCF_INTC_IMRH_INT_MASK45 |
+ MCF_INTC_IMRH_INT_MASK46 |
+ MCF_INTC_IMRH_INT_MASK47 |
+ MCF_INTC_IMRH_INT_MASK48 );
+
+ /* Set up gpio outputs for MII lines */
+ MCF_GPIO_PAR_FECI2C |= (0 |
+ MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+ MCF_GPIO_PAR_FEC = (0 |
+ MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+ MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
+
+static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+{
+ volatile fec_t *fecp;
+
+ fecp = fep->hwp;
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ */
+ fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fecp->fec_mii_speed = fep->phy_speed;
+
+ fec_restart(dev, 0);
+}
+
+static void __inline__ fec_get_mac(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ volatile fec_t *fecp;
+ unsigned char *iap, tmpaddr[ETH_ALEN];
+
+ fecp = fep->hwp;
+
+ if (FEC_FLASHMAC) {
+ /*
+ * Get MAC address from FLASH.
+ * If it is all 1's or 0's, use the default.
+ */
+ iap = FEC_FLASHMAC;
+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+ iap = fec_mac_default;
+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+ iap = fec_mac_default;
+ } else {
+ *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+ *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+ iap = &tmpaddr[0];
+ }
+
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+ /* Adjust MAC if using default MAC address */
+ if (iap == fec_mac_default)
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+}
+
+static void __inline__ fec_enable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_disable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_phy_ack_intr(void)
+{
+}
+
+static void __inline__ fec_localhw_setup(void)
+{
+}
+
+/*
+ * Do not need to make region uncached on 532x.
+ */
+static void __inline__ fec_uncache(unsigned long addr)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
+
#else
/*
mii_do_cmd(dev, fep->phy->config);
mii_do_cmd(dev, phy_cmd_config); /* display configuration */
- /* FIXME: use netif_carrier_{on,off} ; this polls
- * until link is up which is wrong... could be
- * 30 seconds or more we are trapped in here. -jgarzik
+ /* Poll until the PHY tells us its configuration
+ * (not link state).
+ * Request is initiated by mii_do_cmd above, but answer
+ * comes by interrupt.
+ * This should take about 25 usec per register at 2.5 MHz,
+ * and we read approximately 5 registers.
*/
while(!fep->sequence_done)
schedule();
if (index >= FEC_MAX_PORTS)
return -ENXIO;
+ /* Allocate memory for buffer descriptors.
+ */
+ mem_addr = __get_free_page(GFP_KERNEL);
+ if (mem_addr == 0) {
+ printk("FEC: allocate descriptor memory failed?\n");
+ return -ENOMEM;
+ }
+
/* Create an Ethernet device instance.
*/
fecp = (volatile fec_t *) fec_hw[index];
fecp->fec_ecntrl = 1;
udelay(10);
- /* Clear and enable interrupts */
- fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
- fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
-
/* Set the Ethernet address. If using multiple Enets on the 8xx,
* this needs some work to get unique addresses.
*
*/
fec_get_mac(dev);
- /* Allocate memory for buffer descriptors.
- */
- if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
- printk("FEC init error. Need more space.\n");
- printk("FEC initialization failed.\n");
- return 1;
- }
- mem_addr = __get_free_page(GFP_KERNEL);
cbd_base = (cbd_t *)mem_addr;
/* XXX: missing check for allocation failure */
*/
fec_request_intrs(dev);
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+ fecp->fec_ecntrl = 2;
+ fecp->fec_r_des_active = 0;
+
dev->base_addr = (unsigned long)fecp;
/* The FEC Ethernet specific entries in the device structure. */
/* setup MII interface */
fec_set_mii(dev, fep);
+ /* Clear and enable interrupts */
+ fecp->fec_ievent = 0xffc00000;
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
*/
fecp->fec_ecntrl = 1;
udelay(10);
- /* Enable interrupts we wish to service.
- */
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
-
/* Clear any outstanding interrupt.
*/
fecp->fec_ievent = 0xffc00000;
/* And last, enable the transmit and receive processing.
*/
fecp->fec_ecntrl = 2;
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
+
+ /* Enable interrupts we wish to service.
+ */
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
}
static void
fep = netdev_priv(dev);
fecp = fep->hwp;
- fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
-
- while(!(fecp->fec_ievent & FEC_ENET_GRA));
+ /*
+ ** We cannot expect a graceful transmit stop without link !!!
+ */
+ if (fep->link)
+ {
+ fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
+ udelay(10);
+ if (!(fecp->fec_ievent & FEC_ENET_GRA))
+ printk("fec_stop : Graceful transmit stop did not complete !\n");
+ }
/* Whack a reset. We should wait for this.
*/
projects / karo-tx-linux.git / blobdiff