--- /dev/null
+#ifndef __S3C4510B_ETH_H
+#define __S3C4510B_ETH_H
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * MODULE: $Id:$
+ * Description: Ethernet interface
+ * Runtime Env: ARM7TDMI
+ * Change History:
+ * 03-02-04 Create (Curt Brune) curt@cucy.com
+ *
+ */
+
+#define __packed __attribute__ ((packed))
+
+#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */
+#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */
+
+/* Buffered DMA Receiver Control Register */
+#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */
+ /* = Burst Data Size 16 */
+#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */
+ /* case of not OWNER the current Frame */
+#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */
+#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */
+#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */
+#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */
+#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */
+#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */
+#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */
+#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */
+#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */
+#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */
+#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */
+#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */
+
+/* Buffered DMA Trasmit Control Register(BDMATXCON) */
+#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */
+#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */
+ /* of not Owner the current frame */
+#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */
+ /* packet Enable */
+#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */
+#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */
+
+/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */
+#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */
+#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */
+#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */
+#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */
+#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */
+#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */
+#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */
+#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */
+#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */
+#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */
+
+/* BDMA Status Register */
+#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */
+#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */
+#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */
+#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */
+#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */
+#define ETH_S_BRxSEarly 0x00020 /* Early Notify */
+#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */
+#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */
+#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */
+#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */
+#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */
+
+/* MAC Control Register */
+#define ETH_HaltReg 0x0001 /* stop transmission and reception */
+ /* after completion of any current packets */
+#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */
+#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */
+ /* and FIFOs */
+#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */
+ /* is occurring */
+#define ETH_MACLoop 0x0010 /* MAC loopback */
+#define ETH_ConnM00 0x0000 /* Automatic-default */
+#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */
+#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_Loop10 0x0080 /* Loop 10Mbps */
+#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */
+#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */
+#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */
+ /* over */
+#define ETH_Link10 0x8000 /* Link status 10Mbps */
+
+/* CAM control register(CAMCON) */
+#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */
+ /* address */
+#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */
+ /* station address */
+#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */
+ /* address */
+#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */
+ /* reject others */
+ /* 1: reject packets CAM recognizes, */
+ /* accept others */
+#define ETH_CompEn 0x0010 /* Compare Enable mode */
+
+/* Transmit Control Register(MACTXCON) */
+#define ETH_TxEn 0x0001 /* transmit Enable */
+#define ETH_TxHalt 0x0002 /* Transmit Halt Request */
+#define ETH_NoPad 0x0004 /* suppress Padding */
+#define ETH_NoCRC 0x0008 /* Suppress CRC */
+#define ETH_FBack 0x0010 /* Fast Back-off */
+#define ETH_NoDef 0x0020 /* Disable the defer counter */
+#define ETH_SdPause 0x0040 /* Send Pause */
+#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */
+#define ETH_EnUnder 0x0100 /* Enable Underrun */
+#define ETH_EnDefer 0x0200 /* Enable Deferral */
+#define ETH_EnNCarr 0x0400 /* Enable No Carrier */
+#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */
+ /* in the same packet */
+#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */
+ /* 512 bit times(64 bytes times) */
+#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */
+ /* has a parity error */
+#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */
+ /* discards one packet */
+
+/* Transmit Status Register(MACTXSTAT) */
+#define ETH_ExColl 0x0010 /* Excessive collision */
+#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */
+#define ETH_Paused 0x0040 /* packet waited because of pause during */
+ /* transmission */
+#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */
+ /* interrupt condiftion */
+#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */
+ /* transmission */
+#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */
+#define ETH_NCarr 0x0400 /* No carrier sense detected during the */
+ /* transmission of a packet */
+#define ETH_SQE 0x0800 /* Signal Quality Error */
+#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */
+#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */
+#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */
+#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */
+ /* TxEn or Halt immedite */
+
+/* Receive Control Register (MACRXCON) */
+#define ETH_RxEn 0x0001
+#define ETH_RxHalt 0x0002
+#define ETH_LongEn 0x0004
+#define ETH_ShortEn 0x0008
+#define ETH_StripCRC 0x0010
+#define ETH_PassCtl 0x0020
+#define ETH_IgnoreCRC 0x0040
+#define ETH_EnAlign 0x0100
+#define ETH_EnCRCErr 0x0200
+#define ETH_EnOver 0x0400
+#define ETH_EnLongErr 0x0800
+#define ETH_EnRxPar 0x2000
+#define ETH_EnGood 0x4000
+
+/* Receive Status Register(MACRXSTAT) */
+#define ETH_MCtlRecd 0x0020
+#define ETH_MIntRx 0x0040
+#define ETH_MRx10Stat 0x0080
+#define ETH_MAllignErr 0x0100
+#define ETH_MCRCErr 0x0200
+#define ETH_MOverflow 0x0400
+#define ETH_MLongErr 0x0800
+#define ETH_MRxPar 0x2000
+#define ETH_MRxGood 0x4000
+#define ETH_MRxHalted 0x8000
+
+/* type of ethernet packets */
+#define ETH_TYPE_ARP (0x0806)
+#define ETH_TYPE_IP (0x0800)
+
+#define ETH_HDR_SIZE (14)
+
+/* bit field for frame data pointer word */
+typedef struct __BF_FrameDataPtr {
+ u32 dataPtr:31;
+ u32 owner: 1;
+} BF_FrameDataPtr;
+
+typedef union _FrameDataPtr {
+ u32 ui;
+ BF_FrameDataPtr bf;
+} FrameDataPtr;
+
+typedef struct __BF_TX_Options {
+ u32 no_padding: 1;
+ u32 no_crc: 1;
+ u32 macTxIrqEnbl: 1;
+ u32 littleEndian: 1;
+ u32 frameDataDir: 1;
+ u32 widgetAlign: 2;
+ u32 reserved:25;
+} BF_TX_Options;
+
+typedef union _TX_Options {
+ u32 ui;
+ BF_TX_Options bf;
+} TX_Options;
+
+typedef struct __BF_RX_Status {
+ u32 len:16; /* frame length */
+ u32 reserved1: 3;
+ u32 overMax: 1;
+ u32 reserved2: 1;
+ u32 ctrlRcv: 1;
+ u32 intRx: 1;
+ u32 rx10stat: 1;
+ u32 alignErr: 1;
+ u32 crcErr: 1;
+ u32 overFlow: 1;
+ u32 longErr: 1;
+ u32 reserved3: 1;
+ u32 parityErr: 1;
+ u32 good: 1;
+ u32 halted: 1;
+} BF_RX_Status;
+
+typedef union _RX_Status {
+ u32 ui;
+ BF_RX_Status bf;
+} RX_Status;
+
+typedef struct __BF_TX_Status {
+ u32 len:16; /* frame length */
+ u32 txCollCnt: 4;
+ u32 exColl: 1;
+ u32 txDefer: 1;
+ u32 paused: 1;
+ u32 intTx: 1;
+ u32 underRun: 1;
+ u32 defer: 1;
+ u32 noCarrier: 1;
+ u32 SQErr: 1;
+ u32 lateColl: 1;
+ u32 parityErr: 1;
+ u32 complete: 1;
+ u32 halted: 1;
+} BF_TX_Status;
+
+typedef union _TX_Status {
+ u32 ui;
+ BF_TX_Status bf;
+} TX_Status;
+
+/* TX descriptor structure */
+typedef struct __TX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ TX_Options m_opt;
+ volatile TX_Status m_status;
+ struct __TX_FrameDescriptor *m_nextFD;
+} TX_FrameDescriptor;
+
+/* RX descriptor structure */
+typedef struct __RX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ u32 m_reserved;
+ volatile RX_Status m_status;
+ struct __RX_FrameDescriptor *m_nextFD;
+} RX_FrameDescriptor;
+
+/* MAC Frame Structure */
+typedef struct __MACFrame {
+ u8 m_dstAddr[6] __packed;
+ u8 m_srcAddr[6] __packed;
+ u16 m_lengthOrType __packed;
+ u8 m_payload[1506] __packed;
+} MACFrame;
+
+/* Ethernet Control block */
+typedef struct __ETH {
+ TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */
+ TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */
+ RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */
+ RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */
+ u8 *m_mac; /* pointer to our MAC address */
+} ETH;
+
+#endif
projects / karo-tx-uboot.git / blobdiff