#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/bitops.h>
+#include <linux/soc/qcom/smd.h>
#include "smd.h"
struct wcn36xx_cfg_val {
struct ieee80211_sta *sta,
struct wcn36xx_hal_config_bss_params *bss_params)
{
- if (IEEE80211_BAND_5GHZ == WCN36XX_BAND(wcn))
+ if (NL80211_BAND_5GHZ == WCN36XX_BAND(wcn))
bss_params->nw_type = WCN36XX_HAL_11A_NW_TYPE;
else if (sta && sta->ht_cap.ht_supported)
bss_params->nw_type = WCN36XX_HAL_11N_NW_TYPE;
- else if (sta && (sta->supp_rates[IEEE80211_BAND_2GHZ] & 0x7f))
+ else if (sta && (sta->supp_rates[NL80211_BAND_2GHZ] & 0x7f))
bss_params->nw_type = WCN36XX_HAL_11G_NW_TYPE;
else
bss_params->nw_type = WCN36XX_HAL_11B_NW_TYPE;
init_completion(&wcn->hal_rsp_compl);
start = jiffies;
- ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
+ ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
if (ret) {
wcn36xx_err("HAL TX failed\n");
goto out;
return ret;
}
-int wcn36xx_smd_start_scan(struct wcn36xx *wcn)
+int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel)
{
struct wcn36xx_hal_start_scan_req_msg msg_body;
int ret = 0;
mutex_lock(&wcn->hal_mutex);
INIT_HAL_MSG(msg_body, WCN36XX_HAL_START_SCAN_REQ);
- msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn);
+ msg_body.scan_channel = scan_channel;
PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
return ret;
}
-int wcn36xx_smd_end_scan(struct wcn36xx *wcn)
+int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel)
{
struct wcn36xx_hal_end_scan_req_msg msg_body;
int ret = 0;
mutex_lock(&wcn->hal_mutex);
INIT_HAL_MSG(msg_body, WCN36XX_HAL_END_SCAN_REQ);
- msg_body.scan_channel = WCN36XX_HW_CHANNEL(wcn);
+ msg_body.scan_channel = scan_channel;
PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
return 0;
}
-int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn)
+int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn,
+ u8 *channels, size_t channel_count)
{
- struct wcn36xx_hal_update_scan_params_req msg_body;
+ struct wcn36xx_hal_update_scan_params_req_ex msg_body;
int ret = 0;
mutex_lock(&wcn->hal_mutex);
INIT_HAL_MSG(msg_body, WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ);
- msg_body.dot11d_enabled = 0;
- msg_body.dot11d_resolved = 0;
- msg_body.channel_count = 26;
+ msg_body.dot11d_enabled = false;
+ msg_body.dot11d_resolved = true;
+
+ msg_body.channel_count = channel_count;
+ memcpy(msg_body.channels, channels, channel_count);
msg_body.active_min_ch_time = 60;
msg_body.active_max_ch_time = 120;
msg_body.passive_min_ch_time = 60;
msg_body.passive_max_ch_time = 110;
- msg_body.state = 0;
+ msg_body.state = PHY_SINGLE_CHANNEL_CENTERED;
PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
int wcn36xx_smd_exit_bmps(struct wcn36xx *wcn, struct ieee80211_vif *vif)
{
- struct wcn36xx_hal_enter_bmps_req_msg msg_body;
+ struct wcn36xx_hal_exit_bmps_req_msg msg_body;
struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
int ret = 0;
return -ENOENT;
}
+static int wcn36xx_smd_print_reg_info_ind(struct wcn36xx *wcn,
+ void *buf,
+ size_t len)
+{
+ struct wcn36xx_hal_print_reg_info_ind *rsp = buf;
+ int i;
+
+ if (len < sizeof(*rsp)) {
+ wcn36xx_warn("Corrupted print reg info indication\n");
+ return -EIO;
+ }
+
+ wcn36xx_dbg(WCN36XX_DBG_HAL,
+ "reginfo indication, scenario: 0x%x reason: 0x%x\n",
+ rsp->scenario, rsp->reason);
+
+ for (i = 0; i < rsp->count; i++) {
+ wcn36xx_dbg(WCN36XX_DBG_HAL, "\t0x%x: 0x%x\n",
+ rsp->regs[i].addr, rsp->regs[i].value);
+ }
+
+ return 0;
+}
+
int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value)
{
struct wcn36xx_hal_update_cfg_req_msg msg_body, *body;
return ret;
}
-static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
+int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
+ const void *buf, size_t len)
{
- struct wcn36xx_hal_msg_header *msg_header = buf;
+ struct wcn36xx_hal_msg_header msg_header;
+ struct ieee80211_hw *hw = qcom_smd_get_drvdata(channel);
+ struct wcn36xx *wcn = hw->priv;
struct wcn36xx_hal_ind_msg *msg_ind;
wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);
- switch (msg_header->msg_type) {
+ memcpy_fromio(&msg_header, buf, sizeof(struct wcn36xx_hal_msg_header));
+
+ switch (msg_header.msg_type) {
case WCN36XX_HAL_START_RSP:
case WCN36XX_HAL_CONFIG_STA_RSP:
case WCN36XX_HAL_CONFIG_BSS_RSP:
case WCN36XX_HAL_CH_SWITCH_RSP:
case WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP:
case WCN36XX_HAL_8023_MULTICAST_LIST_RSP:
- memcpy(wcn->hal_buf, buf, len);
+ memcpy_fromio(wcn->hal_buf, buf, len);
wcn->hal_rsp_len = len;
complete(&wcn->hal_rsp_compl);
break;
+ case WCN36XX_HAL_COEX_IND:
+ case WCN36XX_HAL_AVOID_FREQ_RANGE_IND:
case WCN36XX_HAL_OTA_TX_COMPL_IND:
case WCN36XX_HAL_MISSED_BEACON_IND:
case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
- msg_ind = kmalloc(sizeof(*msg_ind), GFP_KERNEL);
- if (!msg_ind)
- goto nomem;
- msg_ind->msg_len = len;
- msg_ind->msg = kmemdup(buf, len, GFP_KERNEL);
- if (!msg_ind->msg) {
- kfree(msg_ind);
-nomem:
+ case WCN36XX_HAL_PRINT_REG_INFO_IND:
+ msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_ATOMIC);
+ if (!msg_ind) {
/*
* FIXME: Do something smarter then just
* printing an error.
*/
wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
- msg_header->msg_type);
+ msg_header.msg_type);
break;
}
- mutex_lock(&wcn->hal_ind_mutex);
+
+ msg_ind->msg_len = len;
+ memcpy_fromio(msg_ind->msg, buf, len);
+
+ spin_lock(&wcn->hal_ind_lock);
list_add_tail(&msg_ind->list, &wcn->hal_ind_queue);
queue_work(wcn->hal_ind_wq, &wcn->hal_ind_work);
- mutex_unlock(&wcn->hal_ind_mutex);
+ spin_unlock(&wcn->hal_ind_lock);
wcn36xx_dbg(WCN36XX_DBG_HAL, "indication arrived\n");
break;
default:
wcn36xx_err("SMD_EVENT (%d) not supported\n",
- msg_header->msg_type);
+ msg_header.msg_type);
}
+
+ return 0;
}
static void wcn36xx_ind_smd_work(struct work_struct *work)
{
container_of(work, struct wcn36xx, hal_ind_work);
struct wcn36xx_hal_msg_header *msg_header;
struct wcn36xx_hal_ind_msg *hal_ind_msg;
+ unsigned long flags;
- mutex_lock(&wcn->hal_ind_mutex);
+ spin_lock_irqsave(&wcn->hal_ind_lock, flags);
hal_ind_msg = list_first_entry(&wcn->hal_ind_queue,
struct wcn36xx_hal_ind_msg,
msg_header = (struct wcn36xx_hal_msg_header *)hal_ind_msg->msg;
switch (msg_header->msg_type) {
+ case WCN36XX_HAL_COEX_IND:
+ case WCN36XX_HAL_AVOID_FREQ_RANGE_IND:
+ break;
case WCN36XX_HAL_OTA_TX_COMPL_IND:
wcn36xx_smd_tx_compl_ind(wcn,
hal_ind_msg->msg,
hal_ind_msg->msg,
hal_ind_msg->msg_len);
break;
+ case WCN36XX_HAL_PRINT_REG_INFO_IND:
+ wcn36xx_smd_print_reg_info_ind(wcn,
+ hal_ind_msg->msg,
+ hal_ind_msg->msg_len);
+ break;
default:
wcn36xx_err("SMD_EVENT (%d) not supported\n",
msg_header->msg_type);
}
list_del(wcn->hal_ind_queue.next);
- kfree(hal_ind_msg->msg);
+ spin_unlock_irqrestore(&wcn->hal_ind_lock, flags);
kfree(hal_ind_msg);
- mutex_unlock(&wcn->hal_ind_mutex);
}
int wcn36xx_smd_open(struct wcn36xx *wcn)
{
}
INIT_WORK(&wcn->hal_ind_work, wcn36xx_ind_smd_work);
INIT_LIST_HEAD(&wcn->hal_ind_queue);
- mutex_init(&wcn->hal_ind_mutex);
-
- ret = wcn->ctrl_ops->open(wcn, wcn36xx_smd_rsp_process);
- if (ret) {
- wcn36xx_err("failed to open control channel\n");
- goto free_wq;
- }
+ spin_lock_init(&wcn->hal_ind_lock);
- return ret;
+ return 0;
-free_wq:
- destroy_workqueue(wcn->hal_ind_wq);
out:
return ret;
}
void wcn36xx_smd_close(struct wcn36xx *wcn)
{
- wcn->ctrl_ops->close();
destroy_workqueue(wcn->hal_ind_wq);
- mutex_destroy(&wcn->hal_ind_mutex);
}
projects / karo-tx-linux.git / blobdiff