module_param(itr_trsh, uint, S_IRUGO);
MODULE_PARM_DESC(itr_trsh, " Interrupt moderation threshold, usecs.");
+/* We allow allocation of more than 1 page buffers to support large packets.
+ * It is suboptimal behavior performance wise in case MTU above page size.
+ */
+unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - ETH_HLEN;
+static int mtu_max_set(const char *val, const struct kernel_param *kp)
+{
+ int ret;
+
+ /* sets mtu_max directly. no need to restore it in case of
+ * illegal value since we assume this will fail insmod
+ */
+ ret = param_set_uint(val, kp);
+ if (ret)
+ return ret;
+
+ if (mtu_max < 68 || mtu_max > IEEE80211_MAX_DATA_LEN_DMG)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+static struct kernel_param_ops mtu_max_ops = {
+ .set = mtu_max_set,
+ .get = param_get_uint,
+};
+
+module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, S_IRUGO);
+MODULE_PARM_DESC(mtu_max, " Max MTU value.");
+
#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
#define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */
__raw_writel(*s++, d++);
}
-static void wil_disconnect_cid(struct wil6210_priv *wil, int cid)
+static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
+ bool from_event)
{
uint i;
struct net_device *ndev = wil_to_ndev(wil);
sta->data_port_open = false;
if (sta->status != wil_sta_unused) {
- wmi_disconnect_sta(wil, sta->addr, WLAN_REASON_DEAUTH_LEAVING);
+ if (!from_event)
+ wmi_disconnect_sta(wil, sta->addr,
+ WLAN_REASON_DEAUTH_LEAVING);
+
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
memset(&sta->stats, 0, sizeof(sta->stats));
}
-static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid)
+static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
+ bool from_event)
{
int cid = -ENOENT;
struct net_device *ndev = wil_to_ndev(wil);
}
if (cid >= 0) /* disconnect 1 peer */
- wil_disconnect_cid(wil, cid);
+ wil_disconnect_cid(wil, cid, from_event);
else /* disconnect all */
for (cid = 0; cid < WIL6210_MAX_CID; cid++)
- wil_disconnect_cid(wil, cid);
+ wil_disconnect_cid(wil, cid, from_event);
/* link state */
switch (wdev->iftype) {
struct wil6210_priv, disconnect_worker);
mutex_lock(&wil->mutex);
- _wil6210_disconnect(wil, NULL);
+ _wil6210_disconnect(wil, NULL, false);
mutex_unlock(&wil->mutex);
}
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
+ wil_info(wil, "No recovery for AP-like interface\n");
/* recovery in these modes is done by upper layers */
break;
default:
+ wil_err(wil, "No recovery - unknown interface type %d\n",
+ wdev->iftype);
break;
}
mutex_unlock(&wil->mutex);
return 0;
}
-void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid)
+/**
+ * wil6210_disconnect - disconnect one connection
+ * @wil: driver context
+ * @bssid: peer to disconnect, NULL to disconnect all
+ * @from_event: whether is invoked from FW event handler
+ *
+ * Disconnect and release associated resources. If invoked not from the
+ * FW event handler, issue WMI command(s) to trigger MAC disconnect.
+ */
+void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
+ bool from_event)
{
wil_dbg_misc(wil, "%s()\n", __func__);
del_timer_sync(&wil->connect_timer);
- _wil6210_disconnect(wil, bssid);
+ _wil6210_disconnect(wil, bssid, from_event);
}
void wil_priv_deinit(struct wil6210_priv *wil)
cancel_work_sync(&wil->disconnect_worker);
cancel_work_sync(&wil->fw_error_worker);
mutex_lock(&wil->mutex);
- wil6210_disconnect(wil, NULL);
+ wil6210_disconnect(wil, NULL, false);
mutex_unlock(&wil->mutex);
wmi_event_flush(wil);
destroy_workqueue(wil->wmi_wq_conn);
WARN_ON(test_bit(wil_status_napi_en, &wil->status));
cancel_work_sync(&wil->disconnect_worker);
- wil6210_disconnect(wil, NULL);
+ wil6210_disconnect(wil, NULL, false);
wil->status = 0; /* prevent NAPI from being scheduled */