#define AR5K_EEPROM_N_5GHZ_CHAN 10
#define AR5K_EEPROM_N_2GHZ_CHAN 3
#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4
+#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4
#define AR5K_EEPROM_MAX_CHAN 10
#define AR5K_EEPROM_N_PWR_POINTS_5111 11
#define AR5K_EEPROM_N_PCDAC 11
#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
#define AR5K_EEPROM_MAX_CTLS 32
-#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4
+#define AR5K_EEPROM_N_PD_CURVES 4
#define AR5K_EEPROM_N_XPD0_POINTS 4
#define AR5K_EEPROM_N_XPD3_POINTS 3
#define AR5K_EEPROM_N_PD_GAINS 4
AR5K_CTL_11B = 1,
AR5K_CTL_11G = 2,
AR5K_CTL_TURBO = 3,
- AR5K_CTL_108G = 4,
+ AR5K_CTL_TURBOG = 4,
AR5K_CTL_2GHT20 = 5,
AR5K_CTL_5GHT20 = 6,
AR5K_CTL_2GHT40 = 7,
AR5K_CTL_MODE_M = 15,
};
+/* Default CTL ids for the 3 main reg domains.
+ * Atheros only uses these by default but vendors
+ * can have up to 32 different CTLs for different
+ * scenarios. Note that theese values are ORed with
+ * the mode id (above) so we can have up to 24 CTL
+ * datasets out of these 3 main regdomains. That leaves
+ * 8 ids that can be used by vendors and since 0x20 is
+ * missing from HAL sources i guess this is the set of
+ * custom CTLs vendors can use. */
+#define AR5K_CTL_FCC 0x10
+#define AR5K_CTL_CUSTOM 0x20
+#define AR5K_CTL_ETSI 0x30
+#define AR5K_CTL_MKK 0x40
+
+/* Indicates a CTL with only mode set and
+ * no reg domain mapping, such CTLs are used
+ * for world roaming domains or simply when
+ * a reg domain is not set */
+#define AR5K_CTL_NO_REGDOMAIN 0xf0
+
+/* Indicates an empty (invalid) CTL */
+#define AR5K_CTL_NO_CTL 0xff
+
/* Per channel calibration data, used for power table setup */
struct ath5k_chan_pcal_info_rf5111 {
/* Power levels in half dbm units
* for one power curve. */
- u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
+ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111];
/* PCDAC table steps
* for the above values */
- u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
+ u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111];
/* Starting PCDAC step */
- u8 pcdac_min;
+ u8 pcdac_min;
/* Final PCDAC step */
- u8 pcdac_max;
+ u8 pcdac_max;
};
struct ath5k_chan_pcal_info_rf5112 {
/* Power levels in quarter dBm units
* for lower (0) and higher (3)
- * level curves */
- s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
- s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
+ * level curves in 0.25dB units */
+ s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
/* PCDAC table steps
* for the above values */
- u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
- u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
+ u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
+ u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
};
struct ath5k_chan_pcal_info_rf2413 {
/* Starting pwr/pddac values */
- s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
- u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
- /* (pwr,pddac) points */
- s8 pwr[AR5K_EEPROM_N_PD_GAINS]
- [AR5K_EEPROM_N_PD_POINTS];
- u8 pddac[AR5K_EEPROM_N_PD_GAINS]
- [AR5K_EEPROM_N_PD_POINTS];
+ s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
+ u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
+ /* (pwr,pddac) points
+ * power levels in 0.5dB units */
+ s8 pwr[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+ u8 pddac[AR5K_EEPROM_N_PD_GAINS]
+ [AR5K_EEPROM_N_PD_POINTS];
+};
+
+enum ath5k_powertable_type {
+ AR5K_PWRTABLE_PWR_TO_PCDAC = 0,
+ AR5K_PWRTABLE_LINEAR_PCDAC = 1,
+ AR5K_PWRTABLE_PWR_TO_PDADC = 2,
+};
+
+struct ath5k_pdgain_info {
+ u8 pd_points;
+ u8 *pd_step;
+ /* Power values are in
+ * 0.25dB units */
+ s16 *pd_pwr;
};
struct ath5k_chan_pcal_info {
/* Frequency */
u16 freq;
- /* Max available power */
- s8 max_pwr;
+ /* Tx power boundaries */
+ s16 max_pwr;
+ s16 min_pwr;
union {
struct ath5k_chan_pcal_info_rf5111 rf5111_info;
struct ath5k_chan_pcal_info_rf5112 rf5112_info;
struct ath5k_chan_pcal_info_rf2413 rf2413_info;
};
+ /* Raw values used by phy code
+ * Curves are stored in order from lower
+ * gain to higher gain (max txpower -> min txpower) */
+ struct ath5k_pdgain_info *pd_curves;
};
-/* Per rate calibration data for each mode, used for power table setup */
+/* Per rate calibration data for each mode,
+ * used for rate power table setup.
+ * Note: Values in 0.5dB units */
struct ath5k_rate_pcal_info {
u16 freq; /* Frequency */
- /* Power level for 6-24Mbit/s rates */
+ /* Power level for 6-24Mbit/s rates or
+ * 1Mb rate */
u16 target_power_6to24;
- /* Power level for 36Mbit rate */
+ /* Power level for 36Mbit rate or
+ * 2Mb rate */
u16 target_power_36;
- /* Power level for 48Mbit rate */
+ /* Power level for 48Mbit rate or
+ * 5.5Mbit rate */
u16 target_power_48;
- /* Power level for 54Mbit rate */
+ /* Power level for 54Mbit rate or
+ * 11Mbit rate */
u16 target_power_54;
};
u16 ee_cck_ofdm_power_delta;
u16 ee_scaled_cck_delta;
- /* Used for tx thermal adjustment (eeprom_init, rfregs) */
- u16 ee_tx_clip;
- u16 ee_pwd_84;
- u16 ee_pwd_90;
- u16 ee_gain_select;
-
/* RF Calibration settings (reset, rfregs) */
u16 ee_i_cal[AR5K_EEPROM_N_MODES];
u16 ee_q_cal[AR5K_EEPROM_N_MODES];
/* Power calibration data */
u16 ee_false_detect[AR5K_EEPROM_N_MODES];
- /* Number of pd gain curves per mode (RF2413) */
- u8 ee_pd_gains[AR5K_EEPROM_N_MODES];
+ /* Number of pd gain curves per mode */
+ u8 ee_pd_gains[AR5K_EEPROM_N_MODES];
+ /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */
+ u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS];
- u8 ee_n_piers[AR5K_EEPROM_N_MODES];
+ u8 ee_n_piers[AR5K_EEPROM_N_MODES];
struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
- struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN];
- struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN];
+ struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
/* Per rate target power levels */
- u16 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
+ u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES];
struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
- struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN];
- struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
+ struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX];
/* Conformance test limits (Unused) */
- u16 ee_ctls;
- u16 ee_ctl[AR5K_EEPROM_MAX_CTLS];
+ u8 ee_ctls;
+ u8 ee_ctl[AR5K_EEPROM_MAX_CTLS];
struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS];
/* Noise Floor Calibration settings */
projects / karo-tx-linux.git / blobdiff