*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/if_arp.h>
-#include <linux/devcoredump.h>
#include <linux/time.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include "testmode.h"
#include "iwl-fw-error-dump.h"
#include "iwl-prph.h"
-#include "iwl-csr.h"
#include "iwl-nvm-parse.h"
#include "fw-dbg.h"
else
mvm->max_scans = IWL_MVM_MAX_LMAC_SCANS;
- if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ];
- if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) {
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
+ if (mvm->nvm_data->bands[NL80211_BAND_2GHZ].n_channels)
+ hw->wiphy->bands[NL80211_BAND_2GHZ] =
+ &mvm->nvm_data->bands[NL80211_BAND_2GHZ];
+ if (mvm->nvm_data->bands[NL80211_BAND_5GHZ].n_channels) {
+ hw->wiphy->bands[NL80211_BAND_5GHZ] =
+ &mvm->nvm_data->bands[NL80211_BAND_5GHZ];
if (fw_has_capa(&mvm->fw->ucode_capa,
IWL_UCODE_TLV_CAPA_BEAMFORMER) &&
fw_has_api(&mvm->fw->ucode_capa,
IWL_UCODE_TLV_API_LQ_SS_PARAMS))
- hw->wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap.cap |=
+ hw->wiphy->bands[NL80211_BAND_5GHZ]->vht_cap.cap |=
IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
}
}
hw->netdev_features |= mvm->cfg->features;
- if (!iwl_mvm_is_csum_supported(mvm))
- hw->netdev_features &= ~NETIF_F_RXCSUM;
-
- if (IWL_MVM_SW_TX_CSUM_OFFLOAD)
- hw->netdev_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_TSO | NETIF_F_TSO6;
+ if (!iwl_mvm_is_csum_supported(mvm)) {
+ hw->netdev_features &= ~(IWL_TX_CSUM_NETIF_FLAGS |
+ NETIF_F_RXCSUM);
+ /* We may support SW TX CSUM */
+ if (IWL_MVM_SW_TX_CSUM_OFFLOAD)
+ hw->netdev_features |= IWL_TX_CSUM_NETIF_FLAGS;
+ }
ret = ieee80211_register_hw(mvm->hw);
if (ret)
static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid,
- u16 *ssn, u8 buf_size, bool amsdu)
+ struct ieee80211_ampdu_params *params)
{
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
int ret;
bool tx_agg_ref = false;
+ struct ieee80211_sta *sta = params->sta;
+ enum ieee80211_ampdu_mlme_action action = params->action;
+ u16 tid = params->tid;
+ u16 *ssn = ¶ms->ssn;
+ u8 buf_size = params->buf_size;
+ bool amsdu = params->amsdu;
IWL_DEBUG_HT(mvm, "A-MPDU action on addr %pM tid %d: action %d\n",
sta->addr, tid, action);
ret = -EINVAL;
break;
}
- ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, *ssn, true);
+ ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, *ssn, true, buf_size);
break;
case IEEE80211_AMPDU_RX_STOP:
- ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false);
+ ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false, buf_size);
break;
case IEEE80211_AMPDU_TX_START:
if (!iwl_enable_tx_ampdu(mvm->cfg)) {
ret = iwl_mvm_sta_tx_agg_flush(mvm, vif, sta, tid);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
- ret = iwl_mvm_sta_tx_agg_oper(mvm, vif, sta, tid, buf_size);
+ ret = iwl_mvm_sta_tx_agg_oper(mvm, vif, sta, tid,
+ buf_size, amsdu);
break;
default:
WARN_ON_ONCE(1);
*/
iwl_mvm_unref_all_except(mvm, IWL_MVM_REF_UCODE_DOWN);
- iwl_trans_stop_device(mvm->trans);
+ iwl_mvm_stop_device(mvm);
mvm->scan_status = 0;
mvm->ps_disabled = false;
iwl_mvm_reset_phy_ctxts(mvm);
memset(mvm->fw_key_table, 0, sizeof(mvm->fw_key_table));
memset(mvm->sta_drained, 0, sizeof(mvm->sta_drained));
+ memset(mvm->sta_deferred_frames, 0, sizeof(mvm->sta_deferred_frames));
memset(mvm->tfd_drained, 0, sizeof(mvm->tfd_drained));
memset(&mvm->last_bt_notif, 0, sizeof(mvm->last_bt_notif));
memset(&mvm->last_bt_notif_old, 0, sizeof(mvm->last_bt_notif_old));
*/
flush_work(&mvm->roc_done_wk);
- iwl_trans_stop_device(mvm->trans);
+ iwl_mvm_stop_device(mvm);
iwl_mvm_async_handlers_purge(mvm);
/* async_handlers_list is empty and will stay empty: HW is stopped */
/* the fw is stopped, the aux sta is dead: clean up driver state */
iwl_mvm_del_aux_sta(mvm);
+ iwl_free_fw_paging(mvm);
+
/*
* Clear IN_HW_RESTART flag when stopping the hw (as restart_complete()
* won't be called in this case).
mvm->scan_uid_status[i] = 0;
}
}
-
- mvm->ucode_loaded = false;
}
static void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
flush_work(&mvm->d0i3_exit_work);
flush_work(&mvm->async_handlers_wk);
+ flush_work(&mvm->add_stream_wk);
cancel_delayed_work_sync(&mvm->fw_dump_wk);
iwl_mvm_free_fw_dump_desc(mvm);
}
#endif
+static int iwl_mvm_update_mu_groups(struct iwl_mvm *mvm,
+ struct ieee80211_vif *vif)
+{
+ struct iwl_mu_group_mgmt_cmd cmd = {};
+
+ memcpy(cmd.membership_status, vif->bss_conf.mu_group.membership,
+ WLAN_MEMBERSHIP_LEN);
+ memcpy(cmd.user_position, vif->bss_conf.mu_group.position,
+ WLAN_USER_POSITION_LEN);
+
+ return iwl_mvm_send_cmd_pdu(mvm,
+ WIDE_ID(DATA_PATH_GROUP,
+ UPDATE_MU_GROUPS_CMD),
+ 0, sizeof(cmd), &cmd);
+}
+
+static void iwl_mvm_mu_mimo_iface_iterator(void *_data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ if (vif->mu_mimo_owner) {
+ struct iwl_mu_group_mgmt_notif *notif = _data;
+
+ /*
+ * MU-MIMO Group Id action frame is little endian. We treat
+ * the data received from firmware as if it came from the
+ * action frame, so no conversion is needed.
+ */
+ ieee80211_update_mu_groups(vif,
+ (u8 *)¬if->membership_status,
+ (u8 *)¬if->user_position);
+ }
+}
+
+void iwl_mvm_mu_mimo_grp_notif(struct iwl_mvm *mvm,
+ struct iwl_rx_cmd_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_mu_group_mgmt_notif *notif = (void *)pkt->data;
+
+ ieee80211_iterate_active_interfaces_atomic(
+ mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+ iwl_mvm_mu_mimo_iface_iterator, notif);
+}
+
static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc)
iwl_mvm_mac_ctxt_recalc_tsf_id(mvm, vif);
+ if (changes & BSS_CHANGED_ASSOC && !bss_conf->assoc &&
+ mvmvif->lqm_active)
+ iwl_mvm_send_lqm_cmd(vif, LQM_CMD_OPERATION_STOP_MEASUREMENT,
+ 0, 0);
+
/*
* If we're not associated yet, take the (new) BSSID before associating
* so the firmware knows. If we're already associated, then use the old
vif->addr);
}
+ /*
+ * The firmware tracks the MU-MIMO group on its own.
+ * However, on HW restart we should restore this data.
+ */
+ if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
+ (changes & BSS_CHANGED_MU_GROUPS) && vif->mu_mimo_owner) {
+ ret = iwl_mvm_update_mu_groups(mvm, vif);
+ if (ret)
+ IWL_ERR(mvm,
+ "failed to update VHT MU_MIMO groups\n");
+ }
+
iwl_mvm_recalc_multicast(mvm);
iwl_mvm_configure_bcast_filter(mvm);
WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, 0));
}
- if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS)) {
+ if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS |
+ /*
+ * Send power command on every beacon change,
+ * because we may have not enabled beacon abort yet.
+ */
+ BSS_CHANGED_BEACON_INFO)) {
ret = iwl_mvm_power_update_mac(mvm);
if (ret)
IWL_ERR(mvm, "failed to update power mode\n");
bss_conf->txpower);
iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower);
}
-
}
static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw,
if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT))
return;
- if (iwlwifi_mod_params.uapsd_disable) {
+ if (vif->p2p && !iwl_mvm_is_p2p_standalone_uapsd_supported(mvm)) {
+ vif->driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
+ return;
+ }
+
+ if (!vif->p2p &&
+ (iwlwifi_mod_params.uapsd_disable & IWL_DISABLE_UAPSD_BSS)) {
vif->driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
return;
}
peer_addr, action);
}
+static void iwl_mvm_purge_deferred_tx_frames(struct iwl_mvm *mvm,
+ struct iwl_mvm_sta *mvm_sta)
+{
+ struct iwl_mvm_tid_data *tid_data;
+ struct sk_buff *skb;
+ int i;
+
+ spin_lock_bh(&mvm_sta->lock);
+ for (i = 0; i <= IWL_MAX_TID_COUNT; i++) {
+ tid_data = &mvm_sta->tid_data[i];
+ while ((skb = __skb_dequeue(&tid_data->deferred_tx_frames)))
+ ieee80211_free_txskb(mvm->hw, skb);
+ }
+ spin_unlock_bh(&mvm_sta->lock);
+}
+
static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
/* if a STA is being removed, reuse its ID */
flush_work(&mvm->sta_drained_wk);
+ /*
+ * If we are in a STA removal flow and in DQA mode:
+ *
+ * This is after the sync_rcu part, so the queues have already been
+ * flushed. No more TXs on their way in mac80211's path, and no more in
+ * the queues.
+ * Also, we won't be getting any new TX frames for this station.
+ * What we might have are deferred TX frames that need to be taken care
+ * of.
+ *
+ * Drop any still-queued deferred-frame before removing the STA, and
+ * make sure the worker is no longer handling frames for this STA.
+ */
+ if (old_state == IEEE80211_STA_NONE &&
+ new_state == IEEE80211_STA_NOTEXIST &&
+ iwl_mvm_is_dqa_supported(mvm)) {
+ struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta);
+
+ iwl_mvm_purge_deferred_tx_frames(mvm, mvm_sta);
+ flush_work(&mvm->add_stream_wk);
+
+ /*
+ * No need to make sure deferred TX indication is off since the
+ * worker will already remove it if it was on
+ */
+ }
+
mutex_lock(&mvm->mutex);
if (old_state == IEEE80211_STA_NOTEXIST &&
new_state == IEEE80211_STA_NONE) {
struct ieee80211_vif *vif)
{
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
- u32 duration = min(IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS,
- 200 + vif->bss_conf.beacon_int);
- u32 min_duration = min(IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS,
- 100 + vif->bss_conf.beacon_int);
+ u32 duration = IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS;
+ u32 min_duration = IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS;
if (WARN_ON_ONCE(vif->bss_conf.assoc))
return;
switch (key->cipher) {
case WLAN_CIPHER_SUITE_TKIP:
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE;
break;
case WLAN_CIPHER_SUITE_CCMP:
key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE;
* GTK on AP interface is a TX-only key, return 0;
* on IBSS they're per-station and because we're lazy
* we don't support them for RX, so do the same.
+ * CMAC in AP/IBSS modes must be done in software.
*/
- ret = 0;
+ if (key->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
+ ret = -EOPNOTSUPP;
+ else
+ ret = 0;
key->hw_key_idx = STA_KEY_IDX_INVALID;
break;
}
cpu_to_le32(FW_CMD_ID_AND_COLOR(MAC_INDEX_AUX, 0)),
.sta_id_and_color = cpu_to_le32(mvm->aux_sta.sta_id),
/* Set the channel info data */
- .channel_info.band = (channel->band == IEEE80211_BAND_2GHZ) ?
+ .channel_info.band = (channel->band == NL80211_BAND_2GHZ) ?
PHY_BAND_24 : PHY_BAND_5,
.channel_info.channel = channel->hw_value,
.channel_info.width = PHY_VHT_CHANNEL_MODE20,
break;
case NL80211_IFTYPE_STATION:
+ if (mvmvif->lqm_active)
+ iwl_mvm_send_lqm_cmd(vif,
+ LQM_CMD_OPERATION_STOP_MEASUREMENT,
+ 0, 0);
+
/* Schedule the time event to a bit before beacon 1,
* to make sure we're in the new channel when the
* GO/AP arrives.
if (!vif || vif->type != NL80211_IFTYPE_STATION)
return;
+ /* Make sure we're done with the deferred traffic before flushing */
+ if (iwl_mvm_is_dqa_supported(mvm))
+ flush_work(&mvm->add_stream_wk);
+
mutex_lock(&mvm->mutex);
mvmvif = iwl_mvm_vif_from_mac80211(vif);