struct ieee80211_hdr *hdr,
enum iwl_table_type rate_type)
{
- if (hdr && is_multicast_ether_addr(hdr->addr1) &&
- lq_sta->active_rate_basic)
- return lq_sta->active_rate_basic;
-
if (is_legacy(rate_type)) {
return lq_sta->active_legacy_rate;
} else {
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (!lq_sta) {
+ IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
+ return;
+ } else if (!lq_sta->drv) {
+ IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+ return;
+ }
+
if (!ieee80211_is_data(hdr->frame_control) ||
info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
!(info->flags & IEEE80211_TX_STAT_AMPDU))
return;
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
- !lq_sta->ibss_sta_added)
- return;
-
/*
* Ignore this Tx frame response if its initial rate doesn't match
* that of latest Link Quality command. There may be stragglers
lq_sta->missed_rate_counter++;
if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
lq_sta->missed_rate_counter = 0;
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
}
/* Regardless, ignore this status info for outdated rate */
return;
/* Update uCode's rate table. */
rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
rs_fill_link_cmd(priv, lq_sta, rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
return rate;
}
/* rates available for this association, and for modulation mode */
rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
- IWL_DEBUG_RATE(priv, "mask 0x%04X \n", rate_mask);
+ IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
/* mask with station rate restriction */
if (is_legacy(tbl->lq_type)) {
IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n",
tbl->current_rate, index);
rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
} else
done_search = 1;
}
return;
}
-
+/**
+ * rs_initialize_lq - Initialize a station's hardware rate table
+ *
+ * The uCode's station table contains a table of fallback rates
+ * for automatic fallback during transmission.
+ *
+ * NOTE: This sets up a default set of values. These will be replaced later
+ * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
+ * rc80211_simple.
+ *
+ * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
+ * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
+ * which requires station table entry to exist).
+ */
static void rs_initialize_lq(struct iwl_priv *priv,
struct ieee80211_conf *conf,
struct ieee80211_sta *sta,
i = lq_sta->last_txrate_idx;
- if ((lq_sta->lq.sta_id == 0xff) &&
- (priv->iw_mode == NL80211_IFTYPE_ADHOC))
- goto out;
-
valid_tx_ant = priv->hw_params.valid_tx_ant;
if (!lq_sta->search_better_tbl)
tbl->current_rate = rate;
rs_set_expected_tpt_table(lq_sta, tbl);
rs_fill_link_cmd(NULL, lq_sta, rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_SYNC, true);
out:
return;
}
struct sk_buff *skb = txrc->skb;
struct ieee80211_supported_band *sband = txrc->sband;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
- struct ieee80211_conf *conf = &priv->hw->conf;
- struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_lq_sta *lq_sta = priv_sta;
int rate_idx;
lq_sta->max_rate_idx = -1;
}
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (lq_sta && !lq_sta->drv) {
+ IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+ priv_sta = NULL;
+ }
+
/* Send management frames and NO_ACK data using lowest rate. */
if (rate_control_send_low(sta, priv_sta, txrc))
return;
rate_idx = lq_sta->last_txrate_idx;
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
- !lq_sta->ibss_sta_added) {
- u8 sta_id = iwl_find_station(priv, hdr->addr1);
-
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
- hdr->addr1);
- sta_id = iwl_add_station(priv, hdr->addr1,
- false, CMD_ASYNC, ht_cap);
- }
- if ((sta_id != IWL_INVALID_STATION)) {
- lq_sta->lq.sta_id = sta_id;
- lq_sta->lq.rs_table[0].rate_n_flags = 0;
- lq_sta->ibss_sta_added = 1;
- rs_initialize_lq(priv, conf, sta, lq_sta);
- }
- }
-
if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
rate_idx -= IWL_FIRST_OFDM_RATE;
/* 6M and 9M shared same MCS index */
return lq_sta;
}
-static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta)
+/*
+ * Called after adding a new station to initialize rate scaling
+ */
+void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
{
int i, j;
- struct iwl_priv *priv = (struct iwl_priv *)priv_r;
+ struct ieee80211_hw *hw = priv->hw;
struct ieee80211_conf *conf = &priv->hw->conf;
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- struct iwl_lq_sta *lq_sta = priv_sta;
+ struct iwl_station_priv *sta_priv;
+ struct iwl_lq_sta *lq_sta;
+ struct ieee80211_supported_band *sband;
+
+ sta_priv = (struct iwl_station_priv *) sta->drv_priv;
+ lq_sta = &sta_priv->lq_sta;
+ sband = hw->wiphy->bands[conf->channel->band];
+
- lq_sta->lq.sta_id = 0xff;
+ lq_sta->lq.sta_id = sta_id;
for (j = 0; j < LQ_SIZE; j++)
for (i = 0; i < IWL_RATE_COUNT; i++)
for (i = 0; i < IWL_RATE_COUNT; i++)
rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
- IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init ***\n");
+ IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
+ sta_id);
/* TODO: what is a good starting rate for STA? About middle? Maybe not
* the lowest or the highest rate.. Could consider using RSSI from
* previous packets? Need to have IEEE 802.1X auth succeed immediately
* after assoc.. */
- lq_sta->ibss_sta_added = 0;
- if (priv->iw_mode == NL80211_IFTYPE_AP) {
- u8 sta_id = iwl_find_station(priv,
- sta->addr);
-
- /* for IBSS the call are from tasklet */
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
-
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
- sta_id = iwl_add_station(priv, sta->addr, false,
- CMD_ASYNC, ht_cap);
- }
- if ((sta_id != IWL_INVALID_STATION)) {
- lq_sta->lq.sta_id = sta_id;
- lq_sta->lq.rs_table[0].rate_n_flags = 0;
- }
- /* FIXME: this is w/a remove it later */
- priv->assoc_station_added = 1;
- }
-
lq_sta->is_dup = 0;
lq_sta->max_rate_idx = -1;
lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
lq_sta->is_green = rs_use_green(sta, &priv->current_ht_config);
lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
- lq_sta->active_rate_basic = priv->active_rate_basic;
lq_sta->band = priv->band;
/*
* active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
if (lq_sta->dbg_fixed_rate) {
rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
- iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false);
}
return count;
desc += sprintf(buff+desc,
"Bit Rate= %d Mb/s\n",
iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
- desc += sprintf(buff+desc,
- "Signal Level= %d dBm\tNoise Level= %d dBm\n",
- priv->last_rx_rssi, priv->last_rx_noise);
- desc += sprintf(buff+desc,
- "Tsf= 0x%llx\tBeacon time= 0x%08X\n",
- priv->last_tsf, priv->last_beacon_time);
ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
return ret;
}
#endif
+/*
+ * Initialization of rate scaling information is done by driver after
+ * the station is added. Since mac80211 calls this function before a
+ * station is added we ignore it.
+ */
+static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta)
+{
+}
static struct rate_control_ops rs_ops = {
.module = NULL,
.name = RS_NAME,
.tx_status = rs_tx_status,
.get_rate = rs_get_rate,
- .rate_init = rs_rate_init,
+ .rate_init = rs_rate_init_stub,
.alloc = rs_alloc,
.free = rs_free,
.alloc_sta = rs_alloc_sta,
projects / karo-tx-linux.git / blobdiff