rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma);
if (rxq->rxd == NULL) {
- printk(KERN_ERR "%s: failed to alloc RX descriptors\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc rx descriptors\n");
return -ENOMEM;
}
memset(rxq->rxd, 0, size);
rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL);
if (rxq->buf == NULL) {
- printk(KERN_ERR "%s: failed to alloc RX skbuff list\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc rx skbuff list\n");
pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma);
return -ENOMEM;
}
txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma);
if (txq->txd == NULL) {
- printk(KERN_ERR "%s: failed to alloc TX descriptors\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc tx descriptors\n");
return -ENOMEM;
}
memset(txq->txd, 0, size);
txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL);
if (txq->skb == NULL) {
- printk(KERN_ERR "%s: failed to alloc TX skbuff list\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to alloc tx skbuff list\n");
pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma);
return -ENOMEM;
}
unused++;
}
- printk(KERN_ERR "%s: txq[%d] len=%d head=%d tail=%d "
- "fw_owned=%d drv_owned=%d unused=%d\n",
- wiphy_name(hw->wiphy), i,
- txq->len, txq->head, txq->tail,
- fw_owned, drv_owned, unused);
+ wiphy_err(hw->wiphy,
+ "txq[%d] len=%d head=%d tail=%d "
+ "fw_owned=%d drv_owned=%d unused=%d\n",
+ i,
+ txq->len, txq->head, txq->tail,
+ fw_owned, drv_owned, unused);
}
}
if (timeout) {
WARN_ON(priv->pending_tx_pkts);
if (retry) {
- printk(KERN_NOTICE "%s: tx rings drained\n",
- wiphy_name(hw->wiphy));
+ wiphy_notice(hw->wiphy, "tx rings drained\n");
}
break;
}
if (priv->pending_tx_pkts < oldcount) {
- printk(KERN_NOTICE "%s: waiting for tx rings "
- "to drain (%d -> %d pkts)\n",
- wiphy_name(hw->wiphy), oldcount,
- priv->pending_tx_pkts);
+ wiphy_notice(hw->wiphy,
+ "waiting for tx rings to drain (%d -> %d pkts)\n",
+ oldcount, priv->pending_tx_pkts);
retry = 1;
continue;
}
priv->tx_wait = NULL;
- printk(KERN_ERR "%s: tx rings stuck for %d ms\n",
- wiphy_name(hw->wiphy), MWL8K_TX_WAIT_TIMEOUT_MS);
+ wiphy_err(hw->wiphy, "tx rings stuck for %d ms\n",
+ MWL8K_TX_WAIT_TIMEOUT_MS);
mwl8k_dump_tx_rings(hw);
rc = -ETIMEDOUT;
skb->len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(priv->pdev, dma)) {
- printk(KERN_DEBUG "%s: failed to dma map skb, "
- "dropping TX frame.\n", wiphy_name(hw->wiphy));
+ wiphy_debug(hw->wiphy,
+ "failed to dma map skb, dropping TX frame.\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
PCI_DMA_BIDIRECTIONAL);
if (!timeout) {
- printk(KERN_ERR "%s: Command %s timeout after %u ms\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- MWL8K_CMD_TIMEOUT_MS);
+ wiphy_err(hw->wiphy, "command %s timeout after %u ms\n",
+ mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
+ MWL8K_CMD_TIMEOUT_MS);
rc = -ETIMEDOUT;
} else {
int ms;
rc = cmd->result ? -EINVAL : 0;
if (rc)
- printk(KERN_ERR "%s: Command %s error 0x%x\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- le16_to_cpu(cmd->result));
+ wiphy_err(hw->wiphy, "command %s error 0x%x\n",
+ mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
+ le16_to_cpu(cmd->result));
else if (ms > 2000)
- printk(KERN_NOTICE "%s: Command %s took %d ms\n",
- wiphy_name(hw->wiphy),
- mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- ms);
+ wiphy_notice(hw->wiphy, "command %s took %d ms\n",
+ mwl8k_cmd_name(cmd->code,
+ buf, sizeof(buf)),
+ ms);
}
return rc;
int rc;
if (!priv->radio_on) {
- printk(KERN_DEBUG "%s: dropped TX frame since radio "
- "disabled\n", wiphy_name(hw->wiphy));
+ wiphy_debug(hw->wiphy,
+ "dropped TX frame since radio disabled\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to register irq handler\n");
return -EIO;
}
* mode. (Sniffer mode is only used on STA firmware.)
*/
if (priv->sniffer_enabled) {
- printk(KERN_INFO "%s: unable to create STA "
- "interface due to sniffer mode being enabled\n",
- wiphy_name(hw->wiphy));
+ wiphy_info(hw->wiphy,
+ "unable to create STA interface because sniffer mode is enabled\n");
return -EINVAL;
}
*/
if (!list_empty(&priv->vif_list)) {
if (net_ratelimit())
- printk(KERN_INFO "%s: not enabling sniffer "
- "mode because STA interface is active\n",
- wiphy_name(hw->wiphy));
+ wiphy_info(hw->wiphy,
+ "not enabling sniffer mode because STA interface is active\n");
return 0;
}
priv->sram = pci_iomap(pdev, 0, 0x10000);
if (priv->sram == NULL) {
- printk(KERN_ERR "%s: Cannot map device SRAM\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot map device sram\n");
goto err_iounmap;
}
if (priv->regs == NULL) {
priv->regs = pci_iomap(pdev, 2, 0x10000);
if (priv->regs == NULL) {
- printk(KERN_ERR "%s: Cannot map device registers\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot map device registers\n");
goto err_iounmap;
}
}
/* Ask userland hotplug daemon for the device firmware */
rc = mwl8k_request_firmware(priv);
if (rc) {
- printk(KERN_ERR "%s: Firmware files not found\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "firmware files not found\n");
goto err_stop_firmware;
}
/* Load firmware into hardware */
rc = mwl8k_load_firmware(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot start firmware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot start firmware\n");
goto err_stop_firmware;
}
if (priv->ap_fw) {
priv->rxd_ops = priv->device_info->ap_rxd_ops;
if (priv->rxd_ops == NULL) {
- printk(KERN_ERR "%s: Driver does not have AP "
- "firmware image support for this hardware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy,
+ "Driver does not have AP firmware image support for this hardware\n");
goto err_stop_firmware;
}
} else {
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "failed to register irq handler\n");
goto err_free_queues;
}
rc = mwl8k_cmd_get_hw_spec_sta(hw);
}
if (rc) {
- printk(KERN_ERR "%s: Cannot initialise firmware\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot initialise firmware\n");
goto err_free_irq;
}
/* Turn radio off */
rc = mwl8k_cmd_radio_disable(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot disable\n");
goto err_free_irq;
}
/* Clear MAC address */
rc = mwl8k_cmd_set_mac_addr(hw, NULL, "\x00\x00\x00\x00\x00\x00");
if (rc) {
- printk(KERN_ERR "%s: Cannot clear MAC address\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot clear mac address\n");
goto err_free_irq;
}
rc = ieee80211_register_hw(hw);
if (rc) {
- printk(KERN_ERR "%s: Cannot register device\n",
- wiphy_name(hw->wiphy));
+ wiphy_err(hw->wiphy, "cannot register device\n");
goto err_free_queues;
}
- printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
- wiphy_name(hw->wiphy), priv->device_info->part_name,
- priv->hw_rev, hw->wiphy->perm_addr,
- priv->ap_fw ? "AP" : "STA",
- (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
- (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
+ wiphy_info(hw->wiphy, "%s v%d, %pm, %s firmware %u.%u.%u.%u\n",
+ priv->device_info->part_name,
+ priv->hw_rev, hw->wiphy->perm_addr,
+ priv->ap_fw ? "AP" : "STA",
+ (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
+ (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
return 0;
projects / karo-tx-linux.git / blobdiff