*/
#include <linux/bug.h>
-#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
int min;
int max;
int step;
- unsigned int n_bits;
};
/* Voltage maps in mV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
- .min = 800, .max = 3950, .step = 50, .n_bits = 6,
+ .min = 800, .max = 3950, .step = 50,
}; /* LDO1 ~ 18, 21 all */
static const struct voltage_map_desc buck1245_voltage_map_desc = {
- .min = 650, .max = 2225, .step = 25, .n_bits = 6,
+ .min = 650, .max = 2225, .step = 25,
}; /* Buck1, 2, 4, 5 */
static const struct voltage_map_desc buck37_voltage_map_desc = {
- .min = 750, .max = 3900, .step = 50, .n_bits = 6,
+ .min = 750, .max = 3900, .step = 50,
}; /* Buck3, 7 */
/* current map in mA */
static const struct voltage_map_desc charger_current_map_desc = {
- .min = 200, .max = 950, .step = 50, .n_bits = 4,
+ .min = 200, .max = 950, .step = 50,
};
static const struct voltage_map_desc topoff_current_map_desc = {
- .min = 50, .max = 200, .step = 10, .n_bits = 4,
+ .min = 50, .max = 200, .step = 10,
};
static const struct voltage_map_desc *reg_voltage_map[] = {
u8 val;
ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
- if (ret == -EINVAL)
- return 1; /* "not controllable" */
- else if (ret)
+ if (ret)
return ret;
ret = max8997_read_reg(i2c, reg, &val);
static int max8997_get_voltage_register(struct regulator_dev *rdev,
int *_reg, int *_shift, int *_mask)
{
+ struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask = 0x3f;
break;
case MAX8997_BUCK1:
reg = MAX8997_REG_BUCK1DVS1;
+ if (max8997->buck1_gpiodvs)
+ reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK2:
reg = MAX8997_REG_BUCK2DVS1;
+ if (max8997->buck2_gpiodvs)
+ reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK3:
reg = MAX8997_REG_BUCK3DVS;
break;
case MAX8997_BUCK5:
reg = MAX8997_REG_BUCK5DVS1;
+ if (max8997->buck5_gpiodvs)
+ reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK7:
reg = MAX8997_REG_BUCK7DVS;
return 0;
}
-static int max8997_get_voltage(struct regulator_dev *rdev)
+static int max8997_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int reg, shift, mask, ret;
- int rid = rdev_get_id(rdev);
u8 val;
ret = max8997_get_voltage_register(rdev, ®, &shift, &mask);
if (ret)
return ret;
- if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) ||
- (rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) ||
- (rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs))
- reg += max8997->buck125_gpioindex;
-
ret = max8997_read_reg(i2c, reg, &val);
if (ret)
return ret;
val >>= shift;
val &= mask;
- if (rdev->desc && rdev->desc->ops && rdev->desc->ops->list_voltage)
- return rdev->desc->ops->list_voltage(rdev, val);
-
- /*
- * max8997_list_voltage returns value for any rdev with voltage_map,
- * which works for "CHARGER" and "CHARGER TOPOFF" that do not have
- * list_voltage ops (they are current regulators).
- */
- return max8997_list_voltage(rdev, val);
+ return val;
}
static inline int max8997_get_voltage_proper_val(
const struct voltage_map_desc *desc,
int min_vol, int max_vol)
{
- int i = 0;
+ int i;
if (desc == NULL)
return -EINVAL;
if (max_vol < desc->min || min_vol > desc->max)
return -EINVAL;
- while (desc->min + desc->step * i < min_vol &&
- desc->min + desc->step * i < desc->max)
- i++;
+ if (min_vol < desc->min)
+ min_vol = desc->min;
- if (desc->min + desc->step * i > max_vol)
- return -EINVAL;
+ i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
- if (i >= (1 << desc->n_bits))
+ if (desc->min + desc->step * i > max_vol)
return -EINVAL;
return i;
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
- int reg, shift = 0, mask, ret;
- int i;
- u8 org;
+ int i, reg, shift, mask, ret;
switch (rid) {
case MAX8997_LDO1 ... MAX8997_LDO21:
if (ret)
return ret;
- max8997_read_reg(i2c, reg, &org);
- org = (org & mask) >> shift;
-
ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
*selector = i;
- if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 ||
- rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
- /* If the voltage is increasing */
- if (org < i)
- udelay(DIV_ROUND_UP(desc->step * (i - org),
- max8997->ramp_delay));
+ return ret;
+}
+
+static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ struct max8997_data *max8997 = rdev_get_drvdata(rdev);
+ int rid = rdev_get_id(rdev);
+ const struct voltage_map_desc *desc = reg_voltage_map[rid];
+
+ /* Delay is required only if the voltage is increasing */
+ if (old_selector >= new_selector)
+ return 0;
+
+ /* No need to delay if gpio_dvs_mode */
+ switch (rid) {
+ case MAX8997_BUCK1:
+ if (max8997->buck1_gpiodvs)
+ return 0;
+ break;
+ case MAX8997_BUCK2:
+ if (max8997->buck2_gpiodvs)
+ return 0;
+ break;
+ case MAX8997_BUCK5:
+ if (max8997->buck5_gpiodvs)
+ return 0;
+ break;
}
- return ret;
+ switch (rid) {
+ case MAX8997_BUCK1:
+ case MAX8997_BUCK2:
+ case MAX8997_BUCK4:
+ case MAX8997_BUCK5:
+ return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
+ max8997->ramp_delay);
+ }
+
+ return 0;
}
/*
return ret;
}
-static int max8997_reg_enable_suspend(struct regulator_dev *rdev)
-{
- return 0;
-}
-
static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
- .get_voltage = max8997_get_voltage,
+ .get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_ldobuck,
- .set_suspend_enable = max8997_reg_enable_suspend,
+ .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
- .get_voltage = max8997_get_voltage,
+ .get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_buck,
- .set_suspend_enable = max8997_reg_enable_suspend,
+ .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
- .set_suspend_enable = max8997_reg_enable_suspend,
.set_suspend_disable = max8997_reg_disable_suspend,
};
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
- .get_voltage = max8997_get_voltage,
+ .get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_safeout,
- .set_suspend_enable = max8997_reg_enable_suspend,
.set_suspend_disable = max8997_reg_disable_suspend,
};
static struct regulator_ops max8997_fixedstate_ops = {
.list_voltage = max8997_list_voltage_charger_cv,
- .get_voltage = max8997_get_voltage,
+ .get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_charger_cv,
};
-static int max8997_set_voltage_ldobuck_wrap(struct regulator_dev *rdev,
- int min_uV, int max_uV)
+static int max8997_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
{
unsigned dummy;
+ int rid = rdev_get_id(rdev);
+
+ if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
+ return -EINVAL;
- return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, &dummy);
+ /* Reuse max8997_set_voltage_ldobuck to set current_limit. */
+ return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy);
}
+static int max8997_get_current_limit(struct regulator_dev *rdev)
+{
+ int sel, rid = rdev_get_id(rdev);
+
+ if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
+ return -EINVAL;
+
+ sel = max8997_get_voltage_sel(rdev);
+ if (sel < 0)
+ return sel;
+
+ /* Reuse max8997_list_voltage to get current_limit. */
+ return max8997_list_voltage(rdev, sel);
+}
static struct regulator_ops max8997_charger_ops = {
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
- .get_current_limit = max8997_get_voltage,
- .set_current_limit = max8997_set_voltage_ldobuck_wrap,
+ .get_current_limit = max8997_get_current_limit,
+ .set_current_limit = max8997_set_current_limit,
};
static struct regulator_ops max8997_charger_fixedstate_ops = {
- .is_enabled = max8997_reg_is_enabled,
- .get_current_limit = max8997_get_voltage,
- .set_current_limit = max8997_set_voltage_ldobuck_wrap,
+ .get_current_limit = max8997_get_current_limit,
+ .set_current_limit = max8997_set_current_limit,
};
-#define regulator_desc_ldo(num) { \
- .name = "LDO"#num, \
- .id = MAX8997_LDO##num, \
- .ops = &max8997_ldo_ops, \
+#define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
+ .name = #_name, \
+ .id = MAX8997_##_name, \
+ .ops = &_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
-#define regulator_desc_buck(num) { \
- .name = "BUCK"#num, \
- .id = MAX8997_BUCK##num, \
- .ops = &max8997_buck_ops, \
- .type = REGULATOR_VOLTAGE, \
+
+#define MAX8997_CURRENT_REGULATOR(_name, _ops) {\
+ .name = #_name, \
+ .id = MAX8997_##_name, \
+ .ops = &_ops, \
+ .type = REGULATOR_CURRENT, \
.owner = THIS_MODULE, \
}
static struct regulator_desc regulators[] = {
- regulator_desc_ldo(1),
- regulator_desc_ldo(2),
- regulator_desc_ldo(3),
- regulator_desc_ldo(4),
- regulator_desc_ldo(5),
- regulator_desc_ldo(6),
- regulator_desc_ldo(7),
- regulator_desc_ldo(8),
- regulator_desc_ldo(9),
- regulator_desc_ldo(10),
- regulator_desc_ldo(11),
- regulator_desc_ldo(12),
- regulator_desc_ldo(13),
- regulator_desc_ldo(14),
- regulator_desc_ldo(15),
- regulator_desc_ldo(16),
- regulator_desc_ldo(17),
- regulator_desc_ldo(18),
- regulator_desc_ldo(21),
- regulator_desc_buck(1),
- regulator_desc_buck(2),
- regulator_desc_buck(3),
- regulator_desc_buck(4),
- regulator_desc_buck(5),
- {
- .name = "BUCK6",
- .id = MAX8997_BUCK6,
- .ops = &max8997_fixedvolt_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- regulator_desc_buck(7),
- {
- .name = "EN32KHz_AP",
- .id = MAX8997_EN32KHZ_AP,
- .ops = &max8997_fixedvolt_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "EN32KHz_CP",
- .id = MAX8997_EN32KHZ_CP,
- .ops = &max8997_fixedvolt_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ENVICHG",
- .id = MAX8997_ENVICHG,
- .ops = &max8997_fixedvolt_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ESAFEOUT1",
- .id = MAX8997_ESAFEOUT1,
- .ops = &max8997_safeout_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ESAFEOUT2",
- .id = MAX8997_ESAFEOUT2,
- .ops = &max8997_safeout_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "CHARGER_CV",
- .id = MAX8997_CHARGER_CV,
- .ops = &max8997_fixedstate_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "CHARGER",
- .id = MAX8997_CHARGER,
- .ops = &max8997_charger_ops,
- .type = REGULATOR_CURRENT,
- .owner = THIS_MODULE,
- }, {
- .name = "CHARGER_TOPOFF",
- .id = MAX8997_CHARGER_TOPOFF,
- .ops = &max8997_charger_fixedstate_ops,
- .type = REGULATOR_CURRENT,
- .owner = THIS_MODULE,
- },
+ MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops),
+ MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops),
+ MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops),
+ MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops),
+ MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops),
+ MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops),
+ MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops),
+ MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops),
+ MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops),
+ MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF,
+ max8997_charger_fixedstate_ops),
};
static __devinit int max8997_pmic_probe(struct platform_device *pdev)
{
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct regulator_config config = { };
struct regulator_dev **rdev;
struct max8997_data *max8997;
struct i2c_client *i2c;
return -ENODEV;
}
- max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL);
+ max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
+ GFP_KERNEL);
if (!max8997)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * pdata->num_regulators;
- max8997->rdev = kzalloc(size, GFP_KERNEL);
- if (!max8997->rdev) {
- kfree(max8997);
+ max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max8997->rdev)
return -ENOMEM;
- }
rdev = max8997->rdev;
max8997->dev = &pdev->dev;
pdata->buck1_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
pdata->buck2_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
pdata->buck5_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
if (max_buck1 < max8997->buck1_vol[i])
max_buck1 = max8997->buck1_vol[i];
!gpio_is_valid(pdata->buck125_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
ret = -EINVAL;
- goto err_alloc;
+ goto err_out;
}
ret = gpio_request(pdata->buck125_gpios[0],
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET1\n");
else if (ret)
- goto err_alloc;
+ goto err_out;
else
gpio1set = true;
else if (ret) {
if (gpio1set)
gpio_free(pdata->buck125_gpios[0]);
- goto err_alloc;
+ goto err_out;
} else
gpio2set = true;
gpio_free(pdata->buck125_gpios[0]);
if (gpio2set)
gpio_free(pdata->buck125_gpios[1]);
- goto err_alloc;
+ goto err_out;
}
gpio_direction_output(pdata->buck125_gpios[0],
else if (id == MAX8997_CHARGER_CV)
regulators[id].n_voltages = 16;
- rdev[i] = regulator_register(®ulators[id], max8997->dev,
- pdata->regulators[i].initdata, max8997, NULL);
+ config.dev = max8997->dev;
+ config.init_data = pdata->regulators[i].initdata;
+ config.driver_data = max8997;
+
+ rdev[i] = regulator_register(®ulators[id], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(max8997->dev, "regulator init failed for %d\n",
return 0;
err:
- for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-err_alloc:
- kfree(max8997->rdev);
- kfree(max8997);
-
+ while (--i >= 0)
+ regulator_unregister(rdev[i]);
+err_out:
return ret;
}
int i;
for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-
- kfree(max8997->rdev);
- kfree(max8997);
-
+ regulator_unregister(rdev[i]);
return 0;
}
projects / karo-tx-linux.git / blobdiff