kirkwood: define empty CONFIG_MVGBE_PORTS by default

[karo-tx-uboot.git] / drivers / rtc / mc146818.c

diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index f7cf1064f9052de9b2e56fcc7de3d53544826efa..39e6041be365ccdb9089d21ee302c9de76d429cf 100644 (file)
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -14,6 +14,7 @@
 #include <common.h>
 #include <command.h>
 #include <rtc.h>
+#include <version.h>
 
 #if defined(__I386__) || defined(CONFIG_MALTA)
 #include <asm/io.h>
@@ -23,6 +24,9 @@
 
 #if defined(CONFIG_CMD_DATE)
 
+/* Set this to 1 to clear the CMOS RAM */
+#define CLEAR_CMOS 0
+
 static uchar rtc_read  (uchar reg);
 static void  rtc_write (uchar reg, uchar val);
 
@@ -41,7 +45,14 @@ static void  rtc_write (uchar reg, uchar val);
 #define RTC_CONFIG_B           0x0B
 #define RTC_CONFIG_C           0x0C
 #define RTC_CONFIG_D           0x0D
+#define RTC_REG_SIZE           0x80
+
+#define RTC_CONFIG_A_REF_CLCK_32KHZ    (1 << 5)
+#define RTC_CONFIG_A_RATE_1024HZ       6
 
+#define RTC_CONFIG_B_24H               (1 << 1)
+
+#define RTC_CONFIG_D_VALID_RAM_AND_TIME        0x80
 
 /* ------------------------------------------------------------------------- */
 
@@ -128,25 +139,49 @@ void rtc_reset (void)
  */
 static uchar rtc_read (uchar reg)
 {
-       return(in8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg));
+       return in8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg);
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-       out8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg, val);
+       out8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg, val);
 }
 #else
 static uchar rtc_read (uchar reg)
 {
        out8(RTC_PORT_MC146818,reg);
-       return(in8(RTC_PORT_MC146818+1));
+       return in8(RTC_PORT_MC146818 + 1);
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
        out8(RTC_PORT_MC146818,reg);
-       out8(RTC_PORT_MC146818+1,val);
+       out8(RTC_PORT_MC146818+1, val);
 }
 #endif
 
+void rtc_init(void)
+{
+#if CLEAR_CMOS
+       int i;
+
+       rtc_write(RTC_SECONDS_ALARM, 0);
+       rtc_write(RTC_MINUTES_ALARM, 0);
+       rtc_write(RTC_HOURS_ALARM, 0);
+       for (i = RTC_CONFIG_A; i < RTC_REG_SIZE; i++)
+               rtc_write(i, 0);
+       printf("RTC: zeroing CMOS RAM\n");
+#endif
+
+       /* Setup the real time clock */
+       rtc_write(RTC_CONFIG_B, RTC_CONFIG_B_24H);
+       /* Setup the frequency it operates at */
+       rtc_write(RTC_CONFIG_A, RTC_CONFIG_A_REF_CLCK_32KHZ |
+                 RTC_CONFIG_A_RATE_1024HZ);
+       /* Ensure all reserved bits are 0 in register D */
+       rtc_write(RTC_CONFIG_D, RTC_CONFIG_D_VALID_RAM_AND_TIME);
+
+       /* Clear any pending interrupts */
+       rtc_read(RTC_CONFIG_C);
+}
 #endif