* drivers/s390/cio/cio.c
* S/390 common I/O routines -- low level i/o calls
*
- * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
- * IBM Corporation
+ * Copyright (C) IBM Corp. 1999,2006
* Author(s): Ingo Adlung (adlung@de.ibm.com)
* Cornelia Huck (cornelia.huck@de.ibm.com)
* Arnd Bergmann (arndb@de.ibm.com)
#include <asm/irq_regs.h>
#include <asm/setup.h>
#include <asm/reset.h>
+#include <asm/ipl.h>
#include "airq.h"
#include "cio.h"
#include "css.h"
* Use tpi to get a pending interrupt, call the interrupt handler and
* return a pointer to the subchannel structure.
*/
-static inline int
+static int
cio_tpi(void)
{
struct tpi_info *tpi_info;
return 1;
}
-static inline int
+static int
cio_start_handle_notoper(struct subchannel *sch, __u8 lpm)
{
char dbf_text[15];
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
- CIO_MSG_EVENT(0, "Blacklisted device detected "
+ CIO_MSG_EVENT(4, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
err = -ENODEV;
* Make sure that the i/o interrupt did not "overtake"
* the last HZ timer interrupt.
*/
- account_ticks();
+ account_ticks(S390_lowcore.int_clock);
/*
* Get interrupt information from lowcore
*/
}
#endif
-static inline int
+static int
__disable_subchannel_easy(struct subchannel_id schid, struct schib *schib)
{
int retry, cc;
return -EBUSY; /* uhm... */
}
-static inline int
+/* we can't use the normal udelay here, since it enables external interrupts */
+
+static void udelay_reset(unsigned long usecs)
+{
+ uint64_t start_cc, end_cc;
+
+ asm volatile ("STCK %0" : "=m" (start_cc));
+ do {
+ cpu_relax();
+ asm volatile ("STCK %0" : "=m" (end_cc));
+ } while (((end_cc - start_cc)/4096) < usecs);
+}
+
+static int
__clear_subchannel_easy(struct subchannel_id schid)
{
int retry;
if (schid_equal(&ti.schid, &schid))
return 0;
}
- udelay(100);
+ udelay_reset(100);
}
return -EBUSY;
}
+static int pgm_check_occured;
+
+static void cio_reset_pgm_check_handler(void)
+{
+ pgm_check_occured = 1;
+}
+
+static int stsch_reset(struct subchannel_id schid, volatile struct schib *addr)
+{
+ int rc;
+
+ pgm_check_occured = 0;
+ s390_base_pgm_handler_fn = cio_reset_pgm_check_handler;
+ rc = stsch(schid, addr);
+ s390_base_pgm_handler_fn = NULL;
+
+ /* The program check handler could have changed pgm_check_occured. */
+ barrier();
+
+ if (pgm_check_occured)
+ return -EIO;
+ else
+ return rc;
+}
+
static int __shutdown_subchannel_easy(struct subchannel_id schid, void *data)
{
struct schib schib;
- if (stsch_err(schid, &schib))
+ if (stsch_reset(schid, &schib))
return -ENXIO;
if (!schib.pmcw.ena)
return 0;
/* Reset subchannels. */
for_each_subchannel(__shutdown_subchannel_easy, NULL);
/* Reset channel paths. */
- s390_reset_mcck_handler = s390_reset_chpids_mcck_handler;
+ s390_base_mcck_handler_fn = s390_reset_chpids_mcck_handler;
/* Enable channel report machine checks. */
__ctl_set_bit(14, 28);
/* Temporarily reenable machine checks. */
local_mcck_disable();
/* Disable channel report machine checks. */
__ctl_clear_bit(14, 28);
- s390_reset_mcck_handler = NULL;
+ s390_base_mcck_handler_fn = NULL;
}
static struct reset_call css_reset_call = {
struct schib schib;
struct sch_match_id *match_id = data;
- if (stsch_err(schid, &schib))
+ if (stsch_reset(schid, &schib))
return -ENXIO;
if (schib.pmcw.dnv &&
(schib.pmcw.dev == match_id->devid.devno) &&
do_reipl_asm(*((__u32*)&schid));
}
-extern struct schib ipl_schib;
-
-/*
- * ipl_save_parameters gets called very early. It is not allowed to access
- * anything in the bss section at all. The bss section is not cleared yet,
- * but may contain some ipl parameters written by the firmware.
- * These parameters (if present) are copied to 0x2000.
- * To avoid corruption of the ipl parameters, all variables used by this
- * function must reside on the stack or in the data section.
- */
-void ipl_save_parameters(void)
+int __init cio_get_iplinfo(struct cio_iplinfo *iplinfo)
{
struct subchannel_id schid;
- unsigned int *ipl_ptr;
- void *src, *dst;
+ struct schib schib;
schid = *(struct subchannel_id *)__LC_SUBCHANNEL_ID;
if (!schid.one)
- return;
- if (stsch(schid, &ipl_schib))
- return;
- if (!ipl_schib.pmcw.dnv)
- return;
- ipl_devno = ipl_schib.pmcw.dev;
- ipl_flags |= IPL_DEVNO_VALID;
- if (!ipl_schib.pmcw.qf)
- return;
- ipl_flags |= IPL_PARMBLOCK_VALID;
- ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR;
- src = (void *)(unsigned long)*ipl_ptr;
- dst = (void *)IPL_PARMBLOCK_ORIGIN;
- memmove(dst, src, PAGE_SIZE);
- *ipl_ptr = IPL_PARMBLOCK_ORIGIN;
+ return -ENODEV;
+ if (stsch(schid, &schib))
+ return -ENODEV;
+ if (!schib.pmcw.dnv)
+ return -ENODEV;
+ iplinfo->devno = schib.pmcw.dev;
+ iplinfo->is_qdio = schib.pmcw.qf;
+ return 0;
}
projects / karo-tx-linux.git / blobdiff