mtd: nand: omap: fix error-codes returned from omap-elm driver

[karo-tx-uboot.git] / drivers / serial / ns16550.c

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 32f24dee50ebb039d3960f8fcc9c2b40bdffdeda..f26979dbe15e4ecf510b746dc4c92e58447ee2d5 100644 (file)
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -17,20 +17,61 @@
                     UART_FCR_RXSR |    \
                     UART_FCR_TXSR)             /* Clear & enable FIFOs */
 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED
-#define serial_out(x,y)        outb(x,(ulong)y)
-#define serial_in(y)   inb((ulong)y)
+#define serial_out(x, y)       outb(x, (ulong)y)
+#define serial_in(y)           inb((ulong)y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
+#define serial_out(x, y)       out_be32(y, x)
+#define serial_in(y)           in_be32(y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
+#define serial_out(x, y)       out_le32(y, x)
+#define serial_in(y)           in_le32(y)
 #else
-#define serial_out(x,y) writeb(x,y)
-#define serial_in(y)   readb(y)
+#define serial_out(x, y)       writeb(x, y)
+#define serial_in(y)           readb(y)
 #endif
 
-void NS16550_init (NS16550_t com_port, int baud_divisor)
+#if defined(CONFIG_K2HK_EVM)
+#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE   0
+#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
+#undef UART_MCRVAL
+#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL
+#define UART_MCRVAL             (UART_MCR_RTS | UART_MCR_AFE)
+#else
+#define UART_MCRVAL             (UART_MCR_RTS)
+#endif
+#endif
+
+#ifndef CONFIG_SYS_NS16550_IER
+#define CONFIG_SYS_NS16550_IER  0x00
+#endif /* CONFIG_SYS_NS16550_IER */
+
+void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
-       serial_out(0x00, &com_port->ier);
-#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+       /*
+        * On some OMAP3 devices when UART3 is configured for boot mode before
+        * SPL starts only THRE bit is set. We have to empty the transmitter
+        * before initialization starts.
+        */
+       if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
+            == UART_LSR_THRE) {
+               serial_out(UART_LCR_DLAB, &com_port->lcr);
+               serial_out(baud_divisor & 0xff, &com_port->dll);
+               serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+               serial_out(UART_LCRVAL, &com_port->lcr);
+               serial_out(0, &com_port->mdr1);
+       }
+#endif
+
+       while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
+               ;
+
+       serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+                       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
        serial_out(0x7, &com_port->mdr1);       /* mode select reset TL16C750*/
 #endif
-       serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr);
+       serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
        serial_out(0, &com_port->dll);
        serial_out(0, &com_port->dlm);
        serial_out(UART_LCRVAL, &com_port->lcr);
@@ -40,19 +81,22 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
        serial_out(baud_divisor & 0xff, &com_port->dll);
        serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
        serial_out(UART_LCRVAL, &com_port->lcr);
-#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
-#if defined(CONFIG_APTIX)
-       serial_out(3, &com_port->mdr1); /* /13 mode so Aptix 6MHz can hit 115200 */
-#else
-       serial_out(0, &com_port->mdr1); /* /16 is proper to hit 115200 with 48MHz */
-#endif
+#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
+       defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+
+       /* /16 is proper to hit 115200 with 48MHz */
+       serial_out(0, &com_port->mdr1);
 #endif /* CONFIG_OMAP */
+#if defined(CONFIG_K2HK_EVM)
+       serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
+#endif
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-void NS16550_reinit (NS16550_t com_port, int baud_divisor)
+void NS16550_reinit(NS16550_t com_port, int baud_divisor)
 {
-       serial_out(0x00, &com_port->ier);
+       serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
        serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
        serial_out(0, &com_port->dll);
        serial_out(0, &com_port->dlm);
@@ -66,9 +110,10 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
-void NS16550_putc (NS16550_t com_port, char c)
+void NS16550_putc(NS16550_t com_port, char c)
 {
-       while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
+       while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
+               ;
        serial_out(c, &com_port->thr);
 
        /*
@@ -82,10 +127,10 @@ void NS16550_putc (NS16550_t com_port, char c)
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-char NS16550_getc (NS16550_t com_port)
+char NS16550_getc(NS16550_t com_port)
 {
        while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
-#ifdef CONFIG_USB_TTY
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY)
                extern void usbtty_poll(void);
                usbtty_poll();
 #endif
@@ -94,9 +139,9 @@ char NS16550_getc (NS16550_t com_port)
        return serial_in(&com_port->rbr);
 }
 
-int NS16550_tstc (NS16550_t com_port)
+int NS16550_tstc(NS16550_t com_port)
 {
-       return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
+       return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
 }
 
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */