#include <dm/platform_data/serial_pl01x.h>
#include <linux/compiler.h>
#include "serial_pl01x_internal.h"
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_DM_SERIAL
static struct pl01x_regs *base_regs __attribute__ ((section(".data")));
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
-DECLARE_GLOBAL_DATA_PTR;
#endif
static int pl01x_putc(struct pl01x_regs *regs, char c)
return 0;
}
-static int set_line_control(struct pl01x_regs *regs)
+static int pl011_set_line_control(struct pl01x_regs *regs)
{
unsigned int lcr;
/*
case TYPE_PL010: {
unsigned int divisor;
+ /* disable everything */
+ writel(0, ®s->pl010_cr);
+
switch (baudrate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm);
writel(divisor & 0xff, ®s->pl010_lcrl);
+ /*
+ * Set line control for the PL010 to be 8 bits, 1 stop bit,
+ * no parity, fifo enabled
+ */
+ writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN,
+ ®s->pl010_lcrh);
/* Finally, enable the UART */
writel(UART_PL010_CR_UARTEN, ®s->pl010_cr);
break;
writel(divider, ®s->pl011_ibrd);
writel(fraction, ®s->pl011_fbrd);
- set_line_control(regs);
+ pl011_set_line_control(regs);
/* Finally, enable the UART */
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr);
.setbrg = pl01x_serial_setbrg,
};
+#ifdef CONFIG_OF_CONTROL
+static const struct udevice_id pl01x_serial_id[] ={
+ {.compatible = "arm,pl011", .data = TYPE_PL011},
+ {.compatible = "arm,pl010", .data = TYPE_PL010},
+ {}
+};
+
+static int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->base = addr;
+ plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", 1);
+ plat->type = dev_get_driver_data(dev);
+ return 0;
+}
+#endif
+
U_BOOT_DRIVER(serial_pl01x) = {
.name = "serial_pl01x",
.id = UCLASS_SERIAL,
+ .of_match = of_match_ptr(pl01x_serial_id),
+ .ofdata_to_platdata = of_match_ptr(pl01x_serial_ofdata_to_platdata),
+ .platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata),
.probe = pl01x_serial_probe,
.ops = &pl01x_serial_ops,
.flags = DM_FLAG_PRE_RELOC,