*/
#include <common.h>
-#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <asm/arch/s3c24x0_cpu.h>
DECLARE_GLOBAL_DATA_PTR;
name, \
bus, \
s3serial##port##_init, \
+ NULL,\
s3serial##port##_setbrg, \
s3serial##port##_getc, \
s3serial##port##_tstc, \
/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
reg = get_PCLK() / (16 * gd->baudrate) - 1;
- writel(reg, &uart->UBRDIV);
+ writel(reg, &uart->ubrdiv);
for (i = 0; i < 100; i++)
/* Delay */ ;
}
#endif
/* FIFO enable, Tx/Rx FIFO clear */
- writel(0x07, &uart->UFCON);
- writel(0x0, &uart->UMCON);
+ writel(0x07, &uart->ufcon);
+ writel(0x0, &uart->umcon);
/* Normal,No parity,1 stop,8 bit */
- writel(0x3, &uart->ULCON);
+ writel(0x3, &uart->ulcon);
/*
* tx=level,rx=edge,disable timeout int.,enable rx error int.,
* normal,interrupt or polling
*/
- writel(0x245, &uart->UCON);
+ writel(0x245, &uart->ucon);
#ifdef CONFIG_HWFLOW
- writel(0x1, &uart->UMCON); /* RTS up */
+ writel(0x1, &uart->umcon); /* rts up */
#endif
/* FIXME: This is sooooooooooooooooooo ugly */
#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
/* we need auto hw flow control on the gsm and gps port */
if (dev_index == 0 || dev_index == 1)
- writel(0x10, &uart->UMCON);
+ writel(0x10, &uart->umcon);
#endif
_serial_setbrg(dev_index);
{
struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
- while (!(readl(&uart->UTRSTAT) & 0x1))
+ while (!(readl(&uart->utrstat) & 0x1))
/* wait for character to arrive */ ;
- return readb(&uart->URXH) & 0xff;
+ return readb(&uart->urxh) & 0xff;
}
#if defined(CONFIG_SERIAL_MULTI)
return;
#endif
- while (!(readl(&uart->UTRSTAT) & 0x2))
+ while (!(readl(&uart->utrstat) & 0x2))
/* wait for room in the tx FIFO */ ;
#ifdef CONFIG_HWFLOW
- while (hwflow && !(readl(&uart->UMSTAT) & 0x1))
+ while (hwflow && !(readl(&uart->umstat) & 0x1))
/* Wait for CTS up */ ;
#endif
- writeb(c, &uart->UTXH);
+ writeb(c, &uart->utxh);
/* If \n, also do \r */
if (c == '\n')
{
struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
- return readl(&uart->UTRSTAT) & 0x1;
+ return readl(&uart->utrstat) & 0x1;
}
#if defined(CONFIG_SERIAL_MULTI)