/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* Freescale Quad Serial Peripheral Interface (QSPI) driver
*
#include <spi.h>
#include <asm/io.h>
#include <linux/sizes.h>
+#include <dm.h>
+#include <errno.h>
#include "fsl_qspi.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define RX_BUFFER_SIZE 0x80
-#ifdef CONFIG_MX6SX
+#ifdef CONFIG_SOC_MX6SX
#define TX_BUFFER_SIZE 0x200
#else
#define TX_BUFFER_SIZE 0x40
#define SEQID_PP 6
#define SEQID_RDID 7
#define SEQID_BE_4K 8
+#ifdef CONFIG_SPI_FLASH_BAR
+#define SEQID_BRRD 9
+#define SEQID_BRWR 10
+#define SEQID_RDEAR 11
+#define SEQID_WREAR 12
+#endif
/* QSPI CMD */
#define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */
#define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */
#define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */
+/* Used for Micron, winbond and Macronix flashes */
+#define QSPI_CMD_WREAR 0xc5 /* EAR register write */
+#define QSPI_CMD_RDEAR 0xc8 /* EAR reigster read */
+
+/* Used for Spansion flashes only. */
+#define QSPI_CMD_BRRD 0x16 /* Bank register read */
+#define QSPI_CMD_BRWR 0x17 /* Bank register write */
+
/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
#define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
#define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */
#define QSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */
-#ifdef CONFIG_SYS_FSL_QSPI_LE
-#define qspi_read32 in_le32
-#define qspi_write32 out_le32
-#elif defined(CONFIG_SYS_FSL_QSPI_BE)
-#define qspi_read32 in_be32
-#define qspi_write32 out_be32
-#endif
+/* fsl_qspi_platdata flags */
+#define QSPI_FLAG_REGMAP_ENDIAN_BIG (1 << 0)
-static unsigned long spi_bases[] = {
- QSPI0_BASE_ADDR,
-#ifdef CONFIG_MX6SX
- QSPI1_BASE_ADDR,
-#endif
-};
+/* default SCK frequency, unit: HZ */
+#define FSL_QSPI_DEFAULT_SCK_FREQ 50000000
-static unsigned long amba_bases[] = {
- QSPI0_AMBA_BASE,
-#ifdef CONFIG_MX6SX
- QSPI1_AMBA_BASE,
+/* QSPI max chipselect signals number */
+#define FSL_QSPI_MAX_CHIPSELECT_NUM 4
+
+#ifdef CONFIG_DM_SPI
+/**
+ * struct fsl_qspi_platdata - platform data for Freescale QSPI
+ *
+ * @flags: Flags for QSPI QSPI_FLAG_...
+ * @speed_hz: Default SCK frequency
+ * @reg_base: Base address of QSPI registers
+ * @amba_base: Base address of QSPI memory mapping
+ * @amba_total_size: size of QSPI memory mapping
+ * @flash_num: Number of active slave devices
+ * @num_chipselect: Number of QSPI chipselect signals
+ */
+struct fsl_qspi_platdata {
+ u32 flags;
+ u32 speed_hz;
+ u32 reg_base;
+ u32 amba_base;
+ u32 amba_total_size;
+ u32 flash_num;
+ u32 num_chipselect;
+};
#endif
+
+/**
+ * struct fsl_qspi_priv - private data for Freescale QSPI
+ *
+ * @flags: Flags for QSPI QSPI_FLAG_...
+ * @bus_clk: QSPI input clk frequency
+ * @speed_hz: Default SCK frequency
+ * @cur_seqid: current LUT table sequence id
+ * @sf_addr: flash access offset
+ * @amba_base: Base address of QSPI memory mapping of every CS
+ * @amba_total_size: size of QSPI memory mapping
+ * @cur_amba_base: Base address of QSPI memory mapping of current CS
+ * @flash_num: Number of active slave devices
+ * @num_chipselect: Number of QSPI chipselect signals
+ * @regs: Point to QSPI register structure for I/O access
+ */
+struct fsl_qspi_priv {
+ u32 flags;
+ u32 bus_clk;
+ u32 speed_hz;
+ u32 cur_seqid;
+ u32 sf_addr;
+ u32 amba_base[FSL_QSPI_MAX_CHIPSELECT_NUM];
+ u32 amba_total_size;
+ u32 cur_amba_base;
+ u32 flash_num;
+ u32 num_chipselect;
+ struct fsl_qspi_regs *regs;
};
+#ifndef CONFIG_DM_SPI
struct fsl_qspi {
struct spi_slave slave;
- unsigned long reg_base;
- unsigned long amba_base;
- u32 sf_addr;
- u8 cur_seqid;
+ struct fsl_qspi_priv priv;
};
+#endif
+
+static u32 qspi_read32(u32 flags, u32 *addr)
+{
+ return flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ?
+ in_be32(addr) : in_le32(addr);
+}
+
+static void qspi_write32(u32 flags, u32 *addr, u32 val)
+{
+ flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ?
+ out_be32(addr, val) : out_le32(addr, val);
+}
/* QSPI support swapping the flash read/write data
* in hardware for LS102xA, but not for VF610 */
static inline u32 qspi_endian_xchg(u32 data)
{
-#ifdef CONFIG_VF610
+#ifdef CONFIG_SOC_VF610
return swab32(data);
#else
return data;
#endif
}
-static inline struct fsl_qspi *to_qspi_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct fsl_qspi, slave);
-}
-
-static void qspi_set_lut(struct fsl_qspi *qspi)
+static void qspi_set_lut(struct fsl_qspi_priv *priv)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
+ struct fsl_qspi_regs *regs = priv->regs;
u32 lut_base;
/* Unlock the LUT */
- qspi_write32(®s->lutkey, LUT_KEY_VALUE);
- qspi_write32(®s->lckcr, QSPI_LCKCR_UNLOCK);
+ qspi_write32(priv->flags, ®s->lutkey, LUT_KEY_VALUE);
+ qspi_write32(priv->flags, ®s->lckcr, QSPI_LCKCR_UNLOCK);
/* Write Enable */
lut_base = SEQID_WREN * 4;
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_WREN) |
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_WREN) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
- qspi_write32(®s->lut[lut_base + 1], 0);
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* Fast Read */
lut_base = SEQID_FAST_READ * 4;
+#ifdef CONFIG_SPI_FLASH_BAR
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
else
- qspi_write32(®s->lut[lut_base],
+ qspi_write32(priv->flags, ®s->lut[lut_base],
OPRND0(QSPI_CMD_FAST_READ_4B) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) |
OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) |
INSTR1(LUT_ADDR));
- qspi_write32(®s->lut[lut_base + 1], OPRND0(8) | PAD0(LUT_PAD1) |
- INSTR0(LUT_DUMMY) | OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
- INSTR1(LUT_READ));
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+#endif
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1],
+ OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
+ OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
+ INSTR1(LUT_READ));
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* Read Status */
lut_base = SEQID_RDSR * 4;
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_RDSR) |
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDSR) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
PAD1(LUT_PAD1) | INSTR1(LUT_READ));
- qspi_write32(®s->lut[lut_base + 1], 0);
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* Erase a sector */
lut_base = SEQID_SE * 4;
+#ifdef CONFIG_SPI_FLASH_BAR
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_SE) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_SE) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
else
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE_4B) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- qspi_write32(®s->lut[lut_base + 1], 0);
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_SE_4B) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#endif
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* Erase the whole chip */
lut_base = SEQID_CHIP_ERASE * 4;
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_CHIP_ERASE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
- qspi_write32(®s->lut[lut_base + 1], 0);
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_CHIP_ERASE) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* Page Program */
lut_base = SEQID_PP * 4;
+#ifdef CONFIG_SPI_FLASH_BAR
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_PP) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#else
if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_PP) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
else
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP_4B) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#ifdef CONFIG_MX6SX
+ qspi_write32(priv->flags, ®s->lut[lut_base],
+ OPRND0(QSPI_CMD_PP_4B) | PAD0(LUT_PAD1) |
+ INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#endif
+#ifdef CONFIG_SOC_MX6SX
/*
* To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly.
* So, Use IDATSZ in IPCR to determine the size and here set 0.
*/
- qspi_write32(®s->lut[lut_base + 1], OPRND0(0) |
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], OPRND0(0) |
PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
#else
- qspi_write32(®s->lut[lut_base + 1], OPRND0(TX_BUFFER_SIZE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1],
+ OPRND0(TX_BUFFER_SIZE) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
#endif
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* READ ID */
lut_base = SEQID_RDID * 4;
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_RDID) |
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDID) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(8) |
PAD1(LUT_PAD1) | INSTR1(LUT_READ));
- qspi_write32(®s->lut[lut_base + 1], 0);
- qspi_write32(®s->lut[lut_base + 2], 0);
- qspi_write32(®s->lut[lut_base + 3], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
+ qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
/* SUB SECTOR 4K ERASE */
lut_base = SEQID_BE_4K * 4;
- qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) |
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) |
PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#ifdef CONFIG_SPI_FLASH_BAR
+ /*
+ * BRRD BRWR RDEAR WREAR are all supported, because it is hard to
+ * dynamically check whether to set BRRD BRWR or RDEAR WREAR during
+ * initialization.
+ */
+ lut_base = SEQID_BRRD * 4;
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BRRD) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_READ));
+
+ lut_base = SEQID_BRWR * 4;
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BRWR) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
+
+ lut_base = SEQID_RDEAR * 4;
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDEAR) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_READ));
+
+ lut_base = SEQID_WREAR * 4;
+ qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_WREAR) |
+ PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
+ PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
+#endif
/* Lock the LUT */
- qspi_write32(®s->lutkey, LUT_KEY_VALUE);
- qspi_write32(®s->lckcr, QSPI_LCKCR_LOCK);
+ qspi_write32(priv->flags, ®s->lutkey, LUT_KEY_VALUE);
+ qspi_write32(priv->flags, ®s->lckcr, QSPI_LCKCR_LOCK);
}
-void spi_init()
+#if defined(CONFIG_SYS_FSL_QSPI_AHB)
+/*
+ * If we have changed the content of the flash by writing or erasing,
+ * we need to invalidate the AHB buffer. If we do not do so, we may read out
+ * the wrong data. The spec tells us reset the AHB domain and Serial Flash
+ * domain at the same time.
+ */
+static inline void qspi_ahb_invalid(struct fsl_qspi_priv *priv)
{
- /* do nothing */
-}
+ struct fsl_qspi_regs *regs = priv->regs;
+ u32 reg;
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct fsl_qspi *qspi;
- struct fsl_qspi_regs *regs;
- u32 reg_val, smpr_val;
- u32 total_size, seq_id;
+ reg = qspi_read32(priv->flags, ®s->mcr);
+ reg |= QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK;
+ qspi_write32(priv->flags, ®s->mcr, reg);
- if (bus >= ARRAY_SIZE(spi_bases))
- return NULL;
+ /*
+ * The minimum delay : 1 AHB + 2 SFCK clocks.
+ * Delay 1 us is enough.
+ */
+ udelay(1);
- if (cs >= FSL_QSPI_FLASH_NUM)
- return NULL;
+ reg &= ~(QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK);
+ qspi_write32(priv->flags, ®s->mcr, reg);
+}
- qspi = spi_alloc_slave(struct fsl_qspi, bus, cs);
- if (!qspi)
- return NULL;
+/* Read out the data from the AHB buffer. */
+static inline void qspi_ahb_read(struct fsl_qspi_priv *priv, u8 *rxbuf, int len)
+{
+ struct fsl_qspi_regs *regs = priv->regs;
+ u32 mcr_reg;
- qspi->reg_base = spi_bases[bus];
- /*
- * According cs, use different amba_base to choose the
- * corresponding flash devices.
- *
- * If not, only one flash device is used even if passing
- * different cs using `sf probe`
- */
- qspi->amba_base = amba_bases[bus] + cs * FSL_QSPI_FLASH_SIZE;
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
- qspi->slave.max_write_size = TX_BUFFER_SIZE;
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- regs = (struct fsl_qspi_regs *)qspi->reg_base;
- qspi_write32(®s->mcr, QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK);
+ /* Read out the data directly from the AHB buffer. */
+ memcpy(rxbuf, (u8 *)(priv->cur_amba_base + priv->sf_addr), len);
- smpr_val = qspi_read32(®s->smpr);
- qspi_write32(®s->smpr, smpr_val & ~(QSPI_SMPR_FSDLY_MASK |
- QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK));
- qspi_write32(®s->mcr, QSPI_MCR_RESERVED_MASK);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
+}
- total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
- /*
- * Any read access to non-implemented addresses will provide
- * undefined results.
- *
- * In case single die flash devices, TOP_ADDR_MEMA2 and
- * TOP_ADDR_MEMB2 should be initialized/programmed to
- * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
- * setting the size of these devices to 0. This would ensure
- * that the complete memory map is assigned to only one flash device.
- */
- qspi_write32(®s->sfa1ad, FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
- qspi_write32(®s->sfa2ad, FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
- qspi_write32(®s->sfb1ad, total_size | amba_bases[bus]);
- qspi_write32(®s->sfb2ad, total_size | amba_bases[bus]);
+static void qspi_enable_ddr_mode(struct fsl_qspi_priv *priv)
+{
+ u32 reg, reg2;
+ struct fsl_qspi_regs *regs = priv->regs;
- qspi_set_lut(qspi);
+ reg = qspi_read32(priv->flags, ®s->mcr);
+ /* Disable the module */
+ qspi_write32(priv->flags, ®s->mcr, reg | QSPI_MCR_MDIS_MASK);
- smpr_val = qspi_read32(®s->smpr);
- smpr_val &= ~QSPI_SMPR_DDRSMP_MASK;
- qspi_write32(®s->smpr, smpr_val);
- qspi_write32(®s->mcr, QSPI_MCR_RESERVED_MASK);
+ /* Set the Sampling Register for DDR */
+ reg2 = qspi_read32(priv->flags, ®s->smpr);
+ reg2 &= ~QSPI_SMPR_DDRSMP_MASK;
+ reg2 |= (2 << QSPI_SMPR_DDRSMP_SHIFT);
+ qspi_write32(priv->flags, ®s->smpr, reg2);
- seq_id = 0;
- reg_val = qspi_read32(®s->bfgencr);
- reg_val &= ~QSPI_BFGENCR_SEQID_MASK;
- reg_val |= (seq_id << QSPI_BFGENCR_SEQID_SHIFT);
- reg_val &= ~QSPI_BFGENCR_PAR_EN_MASK;
- qspi_write32(®s->bfgencr, reg_val);
+ /* Enable the module again (enable the DDR too) */
+ reg |= QSPI_MCR_DDR_EN_MASK;
+ /* Enable bit 29 for imx6sx */
+ reg |= (1 << 29);
- return &qspi->slave;
+ qspi_write32(priv->flags, ®s->mcr, reg);
}
-void spi_free_slave(struct spi_slave *slave)
+/*
+ * There are two different ways to read out the data from the flash:
+ * the "IP Command Read" and the "AHB Command Read".
+ *
+ * The IC guy suggests we use the "AHB Command Read" which is faster
+ * then the "IP Command Read". (What's more is that there is a bug in
+ * the "IP Command Read" in the Vybrid.)
+ *
+ * After we set up the registers for the "AHB Command Read", we can use
+ * the memcpy to read the data directly. A "missed" access to the buffer
+ * causes the controller to clear the buffer, and use the sequence pointed
+ * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
+ */
+static void qspi_init_ahb_read(struct fsl_qspi_priv *priv)
{
- struct fsl_qspi *qspi = to_qspi_spi(slave);
+ struct fsl_qspi_regs *regs = priv->regs;
- free(qspi);
+ /* AHB configuration for access buffer 0/1/2 .*/
+ qspi_write32(priv->flags, ®s->buf0cr, QSPI_BUFXCR_INVALID_MSTRID);
+ qspi_write32(priv->flags, ®s->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
+ qspi_write32(priv->flags, ®s->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
+ qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
+ (0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));
+
+ /* We only use the buffer3 */
+ qspi_write32(priv->flags, ®s->buf0ind, 0);
+ qspi_write32(priv->flags, ®s->buf1ind, 0);
+ qspi_write32(priv->flags, ®s->buf2ind, 0);
+
+ /*
+ * Set the default lut sequence for AHB Read.
+ * Parallel mode is disabled.
+ */
+ qspi_write32(priv->flags, ®s->bfgencr,
+ SEQID_FAST_READ << QSPI_BFGENCR_SEQID_SHIFT);
+
+ /*Enable DDR Mode*/
+ qspi_enable_ddr_mode(priv);
}
+#endif
-int spi_claim_bus(struct spi_slave *slave)
+#ifdef CONFIG_SPI_FLASH_BAR
+/* Bank register read/write, EAR register read/write */
+static void qspi_op_rdbank(struct fsl_qspi_priv *priv, u8 *rxbuf, u32 len)
{
- return 0;
+ struct fsl_qspi_regs *regs = priv->regs;
+ u32 reg, mcr_reg, data, seqid;
+
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+
+ qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
+
+ if (priv->cur_seqid == QSPI_CMD_BRRD)
+ seqid = SEQID_BRRD;
+ else
+ seqid = SEQID_RDEAR;
+
+ qspi_write32(priv->flags, ®s->ipcr,
+ (seqid << QSPI_IPCR_SEQID_SHIFT) | len);
+
+ /* Wait previous command complete */
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
+ ;
+
+ while (1) {
+ reg = qspi_read32(priv->flags, ®s->rbsr);
+ if (reg & QSPI_RBSR_RDBFL_MASK) {
+ data = qspi_read32(priv->flags, ®s->rbdr[0]);
+ data = qspi_endian_xchg(data);
+ memcpy(rxbuf, &data, len);
+ qspi_write32(priv->flags, ®s->mcr,
+ qspi_read32(priv->flags, ®s->mcr) |
+ QSPI_MCR_CLR_RXF_MASK);
+ break;
+ }
+ }
+
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
+#endif
-static void qspi_op_rdid(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
+static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
+ struct fsl_qspi_regs *regs = priv->regs;
u32 mcr_reg, rbsr_reg, data;
int i, size;
- mcr_reg = qspi_read32(®s->mcr);
- qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
- qspi_write32(®s->sfar, qspi->amba_base);
+ qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
- qspi_write32(®s->ipcr, (SEQID_RDID << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_RDID << QSPI_IPCR_SEQID_SHIFT) | 0);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
i = 0;
size = len;
while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
- rbsr_reg = qspi_read32(®s->rbsr);
+ rbsr_reg = qspi_read32(priv->flags, ®s->rbsr);
if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
- data = qspi_read32(®s->rbdr[i]);
+ data = qspi_read32(priv->flags, ®s->rbdr[i]);
data = qspi_endian_xchg(data);
memcpy(rxbuf, &data, 4);
rxbuf++;
}
}
- qspi_write32(®s->mcr, mcr_reg);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
-static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len)
+#ifndef CONFIG_SYS_FSL_QSPI_AHB
+/* If not use AHB read, read data from ip interface */
+static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
+ struct fsl_qspi_regs *regs = priv->regs;
u32 mcr_reg, data;
int i, size;
u32 to_or_from;
- mcr_reg = qspi_read32(®s->mcr);
- qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
- to_or_from = qspi->sf_addr + qspi->amba_base;
+ to_or_from = priv->sf_addr + priv->cur_amba_base;
while (len > 0) {
- qspi_write32(®s->sfar, to_or_from);
+ qspi_write32(priv->flags, ®s->sfar, to_or_from);
size = (len > RX_BUFFER_SIZE) ?
RX_BUFFER_SIZE : len;
- qspi_write32(®s->ipcr,
- (SEQID_FAST_READ << QSPI_IPCR_SEQID_SHIFT) | size);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_FAST_READ << QSPI_IPCR_SEQID_SHIFT) |
+ size);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
to_or_from += size;
i = 0;
while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
- data = qspi_read32(®s->rbdr[i]);
+ data = qspi_read32(priv->flags, ®s->rbdr[i]);
data = qspi_endian_xchg(data);
memcpy(rxbuf, &data, 4);
rxbuf++;
size -= 4;
i++;
}
- qspi_write32(®s->mcr, qspi_read32(®s->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
+ qspi_write32(priv->flags, ®s->mcr,
+ qspi_read32(priv->flags, ®s->mcr) |
+ QSPI_MCR_CLR_RXF_MASK);
}
- qspi_write32(®s->mcr, mcr_reg);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
+#endif
-static void qspi_op_pp(struct fsl_qspi *qspi, u32 *txbuf, u32 len)
+static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
- u32 mcr_reg, data, reg, status_reg;
+ struct fsl_qspi_regs *regs = priv->regs;
+ u32 mcr_reg, data, reg, status_reg, seqid;
int i, size, tx_size;
u32 to_or_from = 0;
- mcr_reg = qspi_read32(®s->mcr);
- qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
status_reg = 0;
while ((status_reg & FLASH_STATUS_WEL) != FLASH_STATUS_WEL) {
- qspi_write32(®s->ipcr,
- (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
- qspi_write32(®s->ipcr,
- (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 1);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 1);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
- reg = qspi_read32(®s->rbsr);
+ reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
- status_reg = qspi_read32(®s->rbdr[0]);
+ status_reg = qspi_read32(priv->flags, ®s->rbdr[0]);
status_reg = qspi_endian_xchg(status_reg);
}
- qspi_write32(®s->mcr,
- qspi_read32(®s->mcr) | QSPI_MCR_CLR_RXF_MASK);
+ qspi_write32(priv->flags, ®s->mcr,
+ qspi_read32(priv->flags, ®s->mcr) |
+ QSPI_MCR_CLR_RXF_MASK);
}
- to_or_from = qspi->sf_addr + qspi->amba_base;
- qspi_write32(®s->sfar, to_or_from);
+ /* Default is page programming */
+ seqid = SEQID_PP;
+#ifdef CONFIG_SPI_FLASH_BAR
+ if (priv->cur_seqid == QSPI_CMD_BRWR)
+ seqid = SEQID_BRWR;
+ else if (priv->cur_seqid == QSPI_CMD_WREAR)
+ seqid = SEQID_WREAR;
+#endif
+
+ to_or_from = priv->sf_addr + priv->cur_amba_base;
+
+ qspi_write32(priv->flags, ®s->sfar, to_or_from);
tx_size = (len > TX_BUFFER_SIZE) ?
TX_BUFFER_SIZE : len;
- size = (tx_size + 3) / 4;
-
+ size = tx_size / 4;
for (i = 0; i < size; i++) {
- data = qspi_endian_xchg(*txbuf);
- qspi_write32(®s->tbdr, data);
- txbuf++;
+ memcpy(&data, txbuf, 4);
+ data = qspi_endian_xchg(data);
+ qspi_write32(priv->flags, ®s->tbdr, data);
+ txbuf += 4;
}
- qspi_write32(®s->ipcr,
- (SEQID_PP << QSPI_IPCR_SEQID_SHIFT) | tx_size);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ size = tx_size % 4;
+ if (size) {
+ data = 0;
+ memcpy(&data, txbuf, size);
+ data = qspi_endian_xchg(data);
+ qspi_write32(priv->flags, ®s->tbdr, data);
+ }
+
+ qspi_write32(priv->flags, ®s->ipcr,
+ (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
- qspi_write32(®s->mcr, mcr_reg);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
-static void qspi_op_rdsr(struct fsl_qspi *qspi, u32 *rxbuf)
+static void qspi_op_rdsr(struct fsl_qspi_priv *priv, u32 *rxbuf)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
+ struct fsl_qspi_regs *regs = priv->regs;
u32 mcr_reg, reg, data;
- mcr_reg = qspi_read32(®s->mcr);
- qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
- qspi_write32(®s->sfar, qspi->amba_base);
+ qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
- qspi_write32(®s->ipcr,
- (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 0);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
while (1) {
- reg = qspi_read32(®s->rbsr);
+ reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
- data = qspi_read32(®s->rbdr[0]);
+ data = qspi_read32(priv->flags, ®s->rbdr[0]);
data = qspi_endian_xchg(data);
memcpy(rxbuf, &data, 4);
- qspi_write32(®s->mcr, qspi_read32(®s->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
+ qspi_write32(priv->flags, ®s->mcr,
+ qspi_read32(priv->flags, ®s->mcr) |
+ QSPI_MCR_CLR_RXF_MASK);
break;
}
}
- qspi_write32(®s->mcr, mcr_reg);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
-static void qspi_op_erase(struct fsl_qspi *qspi)
+static void qspi_op_erase(struct fsl_qspi_priv *priv)
{
- struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
+ struct fsl_qspi_regs *regs = priv->regs;
u32 mcr_reg;
u32 to_or_from = 0;
- mcr_reg = qspi_read32(®s->mcr);
- qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
- qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ mcr_reg = qspi_read32(priv->flags, ®s->mcr);
+ qspi_write32(priv->flags, ®s->mcr,
+ QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
- to_or_from = qspi->sf_addr + qspi->amba_base;
- qspi_write32(®s->sfar, to_or_from);
+ to_or_from = priv->sf_addr + priv->cur_amba_base;
+ qspi_write32(priv->flags, ®s->sfar, to_or_from);
- qspi_write32(®s->ipcr,
- (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ qspi_write32(priv->flags, ®s->ipcr,
+ (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
- if (qspi->cur_seqid == QSPI_CMD_SE) {
- qspi_write32(®s->ipcr,
+ if (priv->cur_seqid == QSPI_CMD_SE) {
+ qspi_write32(priv->flags, ®s->ipcr,
(SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
- } else if (qspi->cur_seqid == QSPI_CMD_BE_4K) {
- qspi_write32(®s->ipcr,
+ } else if (priv->cur_seqid == QSPI_CMD_BE_4K) {
+ qspi_write32(priv->flags, ®s->ipcr,
(SEQID_BE_4K << QSPI_IPCR_SEQID_SHIFT) | 0);
}
- while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK)
+ while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK)
;
- qspi_write32(®s->mcr, mcr_reg);
+ qspi_write32(priv->flags, ®s->mcr, mcr_reg);
}
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
- struct fsl_qspi *qspi = to_qspi_spi(slave);
u32 bytes = DIV_ROUND_UP(bitlen, 8);
- static u32 pp_sfaddr;
+ static u32 wr_sfaddr;
u32 txbuf;
if (dout) {
- memcpy(&txbuf, dout, 4);
- qspi->cur_seqid = *(u8 *)dout;
+ if (flags & SPI_XFER_BEGIN) {
+ priv->cur_seqid = *(u8 *)dout;
+ memcpy(&txbuf, dout, 4);
+ }
if (flags == SPI_XFER_END) {
- qspi->sf_addr = pp_sfaddr;
- qspi_op_pp(qspi, (u32 *)dout, bytes);
+ priv->sf_addr = wr_sfaddr;
+ qspi_op_write(priv, (u8 *)dout, bytes);
return 0;
}
- if (qspi->cur_seqid == QSPI_CMD_FAST_READ) {
- qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
- } else if ((qspi->cur_seqid == QSPI_CMD_SE) ||
- (qspi->cur_seqid == QSPI_CMD_BE_4K)) {
- qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
- qspi_op_erase(qspi);
- } else if (qspi->cur_seqid == QSPI_CMD_PP) {
- pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
+ if (priv->cur_seqid == QSPI_CMD_FAST_READ) {
+ priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
+ } else if ((priv->cur_seqid == QSPI_CMD_SE) ||
+ (priv->cur_seqid == QSPI_CMD_BE_4K)) {
+ priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
+ qspi_op_erase(priv);
+ } else if (priv->cur_seqid == QSPI_CMD_PP) {
+ wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
+ } else if ((priv->cur_seqid == QSPI_CMD_BRWR) ||
+ (priv->cur_seqid == QSPI_CMD_WREAR)) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ wr_sfaddr = 0;
+#endif
}
}
if (din) {
- if (qspi->cur_seqid == QSPI_CMD_FAST_READ)
- qspi_op_read(qspi, din, bytes);
- else if (qspi->cur_seqid == QSPI_CMD_RDID)
- qspi_op_rdid(qspi, din, bytes);
- else if (qspi->cur_seqid == QSPI_CMD_RDSR)
- qspi_op_rdsr(qspi, din);
+ if (priv->cur_seqid == QSPI_CMD_FAST_READ) {
+#ifdef CONFIG_SYS_FSL_QSPI_AHB
+ qspi_ahb_read(priv, din, bytes);
+#else
+ qspi_op_read(priv, din, bytes);
+#endif
+ } else if (priv->cur_seqid == QSPI_CMD_RDID)
+ qspi_op_rdid(priv, din, bytes);
+ else if (priv->cur_seqid == QSPI_CMD_RDSR)
+ qspi_op_rdsr(priv, din);
+#ifdef CONFIG_SPI_FLASH_BAR
+ else if ((priv->cur_seqid == QSPI_CMD_BRRD) ||
+ (priv->cur_seqid == QSPI_CMD_RDEAR)) {
+ priv->sf_addr = 0;
+ qspi_op_rdbank(priv, din, bytes);
+ }
+#endif
}
+#ifdef CONFIG_SYS_FSL_QSPI_AHB
+ if ((priv->cur_seqid == QSPI_CMD_SE) ||
+ (priv->cur_seqid == QSPI_CMD_PP) ||
+ (priv->cur_seqid == QSPI_CMD_BE_4K) ||
+ (priv->cur_seqid == QSPI_CMD_WREAR) ||
+ (priv->cur_seqid == QSPI_CMD_BRWR))
+ qspi_ahb_invalid(priv);
+#endif
+
+ return 0;
+}
+
+void qspi_module_disable(struct fsl_qspi_priv *priv, u8 disable)
+{
+ u32 mcr_val;
+
+ mcr_val = qspi_read32(priv->flags, &priv->regs->mcr);
+ if (disable)
+ mcr_val |= QSPI_MCR_MDIS_MASK;
+ else
+ mcr_val &= ~QSPI_MCR_MDIS_MASK;
+ qspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
+}
+
+void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits)
+{
+ u32 smpr_val;
+
+ smpr_val = qspi_read32(priv->flags, &priv->regs->smpr);
+ smpr_val &= ~clear_bits;
+ smpr_val |= set_bits;
+ qspi_write32(priv->flags, &priv->regs->smpr, smpr_val);
+}
+#ifndef CONFIG_DM_SPI
+static unsigned long spi_bases[] = {
+ QSPI0_BASE_ADDR,
+#ifdef CONFIG_MX6SX
+ QSPI1_BASE_ADDR,
+#endif
+};
+
+static unsigned long amba_bases[] = {
+ QSPI0_AMBA_BASE,
+#ifdef CONFIG_MX6SX
+ QSPI1_AMBA_BASE,
+#endif
+};
+
+static inline struct fsl_qspi *to_qspi_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct fsl_qspi, slave);
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct fsl_qspi *qspi;
+ struct fsl_qspi_regs *regs;
+ u32 total_size;
+
+ if (bus >= ARRAY_SIZE(spi_bases))
+ return NULL;
+
+ if (cs >= FSL_QSPI_FLASH_NUM)
+ return NULL;
+
+ qspi = spi_alloc_slave(struct fsl_qspi, bus, cs);
+ if (!qspi)
+ return NULL;
+
+#ifdef CONFIG_SYS_FSL_QSPI_BE
+ qspi->priv.flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG;
+#endif
+
+ regs = (struct fsl_qspi_regs *)spi_bases[bus];
+ qspi->priv.regs = regs;
+ /*
+ * According cs, use different amba_base to choose the
+ * corresponding flash devices.
+ *
+ * If not, only one flash device is used even if passing
+ * different cs using `sf probe`
+ */
+ qspi->priv.cur_amba_base = amba_bases[bus] + cs * FSL_QSPI_FLASH_SIZE;
+
+ qspi->slave.max_write_size = TX_BUFFER_SIZE;
+
+ qspi_write32(qspi->priv.flags, ®s->mcr,
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK);
+
+ qspi_cfg_smpr(&qspi->priv,
+ ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
+ QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
+
+ total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
+ /*
+ * Any read access to non-implemented addresses will provide
+ * undefined results.
+ *
+ * In case single die flash devices, TOP_ADDR_MEMA2 and
+ * TOP_ADDR_MEMB2 should be initialized/programmed to
+ * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
+ * setting the size of these devices to 0. This would ensure
+ * that the complete memory map is assigned to only one flash device.
+ */
+ qspi_write32(qspi->priv.flags, ®s->sfa1ad,
+ FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
+ qspi_write32(qspi->priv.flags, ®s->sfa2ad,
+ FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
+ qspi_write32(qspi->priv.flags, ®s->sfb1ad,
+ total_size | amba_bases[bus]);
+ qspi_write32(qspi->priv.flags, ®s->sfb2ad,
+ total_size | amba_bases[bus]);
+
+ qspi_set_lut(&qspi->priv);
+
+#ifdef CONFIG_SYS_FSL_QSPI_AHB
+ qspi_init_ahb_read(&qspi->priv);
+#endif
+
+ qspi_module_disable(&qspi->priv, 0);
+
+ return &qspi->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct fsl_qspi *qspi = to_qspi_spi(slave);
+
+ free(qspi);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
return 0;
}
{
/* Nothing to do */
}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct fsl_qspi *qspi = to_qspi_spi(slave);
+
+ return qspi_xfer(&qspi->priv, bitlen, dout, din, flags);
+}
+
+void spi_init(void)
+{
+ /* Nothing to do */
+}
+#else
+static int fsl_qspi_child_pre_probe(struct udevice *dev)
+{
+ struct spi_slave *slave = dev_get_parentdata(dev);
+
+ slave->max_write_size = TX_BUFFER_SIZE;
+
+ return 0;
+}
+
+static int fsl_qspi_probe(struct udevice *bus)
+{
+ u32 total_size;
+ struct fsl_qspi_platdata *plat = dev_get_platdata(bus);
+ struct fsl_qspi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_bus *dm_spi_bus;
+
+ dm_spi_bus = bus->uclass_priv;
+
+ dm_spi_bus->max_hz = plat->speed_hz;
+
+ priv->regs = (struct fsl_qspi_regs *)plat->reg_base;
+ priv->flags = plat->flags;
+
+ priv->speed_hz = plat->speed_hz;
+ priv->amba_base[0] = plat->amba_base;
+ priv->amba_total_size = plat->amba_total_size;
+ priv->flash_num = plat->flash_num;
+ priv->num_chipselect = plat->num_chipselect;
+
+ qspi_write32(priv->flags, &priv->regs->mcr,
+ QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK);
+
+ qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
+ QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
+
+ total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
+ /*
+ * Any read access to non-implemented addresses will provide
+ * undefined results.
+ *
+ * In case single die flash devices, TOP_ADDR_MEMA2 and
+ * TOP_ADDR_MEMB2 should be initialized/programmed to
+ * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
+ * setting the size of these devices to 0. This would ensure
+ * that the complete memory map is assigned to only one flash device.
+ */
+ qspi_write32(priv->flags, &priv->regs->sfa1ad,
+ FSL_QSPI_FLASH_SIZE | priv->amba_base[0]);
+ qspi_write32(priv->flags, &priv->regs->sfa2ad,
+ FSL_QSPI_FLASH_SIZE | priv->amba_base[0]);
+ qspi_write32(priv->flags, &priv->regs->sfb1ad,
+ total_size | priv->amba_base[0]);
+ qspi_write32(priv->flags, &priv->regs->sfb2ad,
+ total_size | priv->amba_base[0]);
+
+ qspi_set_lut(priv);
+
+#ifdef CONFIG_SYS_FSL_QSPI_AHB
+ qspi_init_ahb_read(priv);
+#endif
+
+ qspi_module_disable(priv, 0);
+
+ return 0;
+}
+
+static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct reg_data {
+ u32 addr;
+ u32 size;
+ } regs_data[2];
+ struct fsl_qspi_platdata *plat = bus->platdata;
+ const void *blob = gd->fdt_blob;
+ int node = bus->of_offset;
+ int ret, flash_num = 0, subnode;
+
+ if (fdtdec_get_bool(blob, node, "big-endian"))
+ plat->flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG;
+
+ ret = fdtdec_get_int_array(blob, node, "reg", (u32 *)regs_data,
+ sizeof(regs_data)/sizeof(u32));
+ if (ret) {
+ debug("Error: can't get base addresses (ret = %d)!\n", ret);
+ return -ENOMEM;
+ }
+
+ /* Count flash numbers */
+ fdt_for_each_subnode(blob, subnode, node)
+ ++flash_num;
+
+ if (flash_num == 0) {
+ debug("Error: Missing flashes!\n");
+ return -ENODEV;
+ }
+
+ plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
+ FSL_QSPI_DEFAULT_SCK_FREQ);
+ plat->num_chipselect = fdtdec_get_int(blob, node, "num-cs",
+ FSL_QSPI_MAX_CHIPSELECT_NUM);
+
+ plat->reg_base = regs_data[0].addr;
+ plat->amba_base = regs_data[1].addr;
+ plat->amba_total_size = regs_data[1].size;
+ plat->flash_num = flash_num;
+
+ debug("%s: regs=<0x%x> <0x%x, 0x%x>, max-frequency=%d, endianess=%s\n",
+ __func__,
+ plat->reg_base,
+ plat->amba_base,
+ plat->amba_total_size,
+ plat->speed_hz,
+ plat->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le"
+ );
+
+ return 0;
+}
+
+static int fsl_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct fsl_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ return qspi_xfer(priv, bitlen, dout, din, flags);
+}
+
+static int fsl_qspi_claim_bus(struct udevice *dev)
+{
+ struct fsl_qspi_priv *priv;
+ struct udevice *bus;
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ priv->cur_amba_base =
+ priv->amba_base[0] + FSL_QSPI_FLASH_SIZE * slave_plat->cs;
+
+ qspi_module_disable(priv, 0);
+
+ return 0;
+}
+
+static int fsl_qspi_release_bus(struct udevice *dev)
+{
+ struct fsl_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ qspi_module_disable(priv, 1);
+
+ return 0;
+}
+
+static int fsl_qspi_set_speed(struct udevice *bus, uint speed)
+{
+ /* Nothing to do */
+ return 0;
+}
+
+static int fsl_qspi_set_mode(struct udevice *bus, uint mode)
+{
+ /* Nothing to do */
+ return 0;
+}
+
+static const struct dm_spi_ops fsl_qspi_ops = {
+ .claim_bus = fsl_qspi_claim_bus,
+ .release_bus = fsl_qspi_release_bus,
+ .xfer = fsl_qspi_xfer,
+ .set_speed = fsl_qspi_set_speed,
+ .set_mode = fsl_qspi_set_mode,
+};
+
+static const struct udevice_id fsl_qspi_ids[] = {
+ { .compatible = "fsl,vf610-qspi" },
+ { .compatible = "fsl,imx6sx-qspi" },
+ { }
+};
+
+U_BOOT_DRIVER(fsl_qspi) = {
+ .name = "fsl_qspi",
+ .id = UCLASS_SPI,
+ .of_match = fsl_qspi_ids,
+ .ops = &fsl_qspi_ops,
+ .ofdata_to_platdata = fsl_qspi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct fsl_qspi_platdata),
+ .priv_auto_alloc_size = sizeof(struct fsl_qspi_priv),
+ .probe = fsl_qspi_probe,
+ .child_pre_probe = fsl_qspi_child_pre_probe,
+};
+#endif
projects / karo-tx-uboot.git / blobdiff