Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
- History:
-
- 2005-05-19 v0.1 Initial version, based on incomplete docs
- and analysis of misbehavior with the standard driver
- 2005-05-20 v0.2 Extended the input buffer to avoid losing
- random 64-byte chunks of data
- 2005-05-21 v0.3 implemented chars_in_buffer()
- turned on low_latency
- simplified the code somewhat
- 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load
- removed some dead code
- added sponsor notice
- coding style clean-up
- 2005-06-20 v0.4.1 add missing braces :-/
- killed end-of-line whitespace
- 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2
- 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard
- 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes
- wants to send >2000 bytes.
- 2006-04-10 v0.5 fixed two array overrun errors :-/
- 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755
- 2006-05-15 v0.6 re-enable multi-port support
- 2006-06-01 v0.6.1 add COBRA
- 2006-06-01 v0.6.2 add backwards-compatibility stuff
- 2006-06-01 v0.6.3 add Novatel Wireless
- 2006-06-01 v0.7 Option => GSM
- 2006-06-01 v0.7.1 add COBRA2
+ History: see the git log.
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
This driver exists because the "normal" serial driver doesn't work too well
with GSM modems. Issues:
- data loss -- one single Receive URB is not nearly enough
- - nonstandard flow (Option devices) and multiplex (Sierra) control
+ - nonstandard flow (Option devices) control
- controlling the baud rate doesn't make sense
This driver is named "option" because the most common device it's
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
#define AUDIOVOX_VENDOR_ID 0x0F3D
-#define SIERRAWIRELESS_VENDOR_ID 0x1199
#define NOVATELWIRELESS_VENDOR_ID 0x1410
+#define ANYDATA_VENDOR_ID 0x16d5
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
-#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
+#define ANYDATA_PRODUCT_ID 0x6501
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
- { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
- { } /* Terminating entry */
-};
-static struct usb_device_id option_ids3[] = {
- { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
/* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1.
*/
-static struct usb_serial_driver option_3port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "option",
- },
- .description = "GSM modem (3-port)",
- .id_table = option_ids3,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
- .num_ports = 3,
- .open = option_open,
- .close = option_close,
- .write = option_write,
- .write_room = option_write_room,
- .chars_in_buffer = option_chars_in_buffer,
- .throttle = option_rx_throttle,
- .unthrottle = option_rx_unthrottle,
- .set_termios = option_set_termios,
- .break_ctl = option_break_ctl,
- .tiocmget = option_tiocmget,
- .tiocmset = option_tiocmset,
- .attach = option_startup,
- .shutdown = option_shutdown,
- .read_int_callback = option_instat_callback,
-};
static struct usb_serial_driver option_1port_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "option",
+ .name = "option1",
},
.description = "GSM modem (1-port)",
.id_table = option_ids1,
retval = usb_serial_register(&option_1port_device);
if (retval)
goto failed_1port_device_register;
- retval = usb_serial_register(&option_3port_device);
- if (retval)
- goto failed_3port_device_register;
retval = usb_register(&option_driver);
if (retval)
goto failed_driver_register;
return 0;
failed_driver_register:
- usb_serial_deregister (&option_3port_device);
-failed_3port_device_register:
usb_serial_deregister (&option_1port_device);
failed_1port_device_register:
return retval;
static void __exit option_exit(void)
{
usb_deregister (&option_driver);
- usb_serial_deregister (&option_3port_device);
usb_serial_deregister (&option_1port_device);
}
dbg("%s", __FUNCTION__);
-
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
projects / karo-tx-linux.git / blobdiff