Move architecture-specific includes to arch/$ARCH/include/asm

[karo-tx-uboot.git] / include / asm-blackfin / ptrace.h

diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
deleted file mode 100644 (file)
index 251d5e6..0000000
--- a/include/asm-blackfin/ptrace.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _BFIN_PTRACE_H
-#define _BFIN_PTRACE_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- *       0 - 7 are data registers R0-R7
- *       8 - 15 are address registers P0-P7
- *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
- *      32 - 33 A registers A0 & A1
- *      34 -    status register
- * -----------------------------
- *
- * We follows above, except:
- *      32-33 --- Low 32-bit of A0&1
- *      34-35 --- High 8-bit of A0&1
- */
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-       long orig_pc;
-       long ipend;
-       long seqstat;
-       long rete;
-       long retn;
-       long retx;
-       long pc;                /* PC == RETI */
-       long rets;
-       long reserved;          /* Used as scratch during system calls */
-       long astat;
-       long lb1;
-       long lb0;
-       long lt1;
-       long lt0;
-       long lc1;
-       long lc0;
-       long a1w;
-       long a1x;
-       long a0w;
-       long a0x;
-       long b3;
-       long b2;
-       long b1;
-       long b0;
-       long l3;
-       long l2;
-       long l1;
-       long l0;
-       long m3;
-       long m2;
-       long m1;
-       long m0;
-       long i3;
-       long i2;
-       long i1;
-       long i0;
-       long usp;
-       long fp;
-       long p5;
-       long p4;
-       long p3;
-       long p2;
-       long p1;
-       long p0;
-       long r7;
-       long r6;
-       long r5;
-       long r4;
-       long r3;
-       long r2;
-       long r1;
-       long r0;
-       long orig_r0;
-       long orig_p0;
-       long syscfg;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13   /* ptrace signal  */
-
-#define PTRACE_GETFDPIC           31   /* get the ELF fdpic loadmap address */
-#define PTRACE_GETFDPIC_EXEC       0   /* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP     1   /* [addr] request the interpreter loadmap */
-
-#define PS_S  (0x0002)
-
-#ifdef __KERNEL__
-
-/* user_mode returns true if only one bit is set in IPEND, other than the
-   master interrupt enable.  */
-#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
-#define instruction_pointer(regs) ((regs)->pc)
-#define user_stack_pointer(regs)  ((regs)->usp)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-
-#define arch_has_single_step() (1)
-extern void user_enable_single_step(struct task_struct *);
-/* see arch/blackfin/kernel/ptrace.c about this redirect */
-#define user_disable_single_step(child) ptrace_disable(child)
-
-/*
- * Get the address of the live pt_regs for the specified task.
- * These are saved onto the top kernel stack when the process
- * is not running.
- *
- * Note: if a user thread is execve'd from kernel space, the
- * kernel stack will not be empty on entry to the kernel, so
- * ptracing these tasks will fail.
- */
-#define task_pt_regs(task) \
-       (struct pt_regs *) \
-           ((unsigned long)task_stack_page(task) + \
-            (THREAD_SIZE - sizeof(struct pt_regs)))
-
-#endif  /*  __KERNEL__  */
-
-#endif                         /* __ASSEMBLY__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- */
-
-#define PT_R0 204
-#define PT_R1 200
-#define PT_R2 196
-#define PT_R3 192
-#define PT_R4 188
-#define PT_R5 184
-#define PT_R6 180
-#define PT_R7 176
-#define PT_P0 172
-#define PT_P1 168
-#define PT_P2 164
-#define PT_P3 160
-#define PT_P4 156
-#define PT_P5 152
-#define PT_FP 148
-#define PT_USP 144
-#define PT_I0 140
-#define PT_I1 136
-#define PT_I2 132
-#define PT_I3 128
-#define PT_M0 124
-#define PT_M1 120
-#define PT_M2 116
-#define PT_M3 112
-#define PT_L0 108
-#define PT_L1 104
-#define PT_L2 100
-#define PT_L3 96
-#define PT_B0 92
-#define PT_B1 88
-#define PT_B2 84
-#define PT_B3 80
-#define PT_A0X 76
-#define PT_A0W 72
-#define PT_A1X 68
-#define PT_A1W 64
-#define PT_LC0 60
-#define PT_LC1 56
-#define PT_LT0 52
-#define PT_LT1 48
-#define PT_LB0 44
-#define PT_LB1 40
-#define PT_ASTAT 36
-#define PT_RESERVED 32
-#define PT_RETS 28
-#define PT_PC 24
-#define PT_RETX 20
-#define PT_RETN 16
-#define PT_RETE 12
-#define PT_SEQSTAT 8
-#define PT_IPEND 4
-
-#define PT_ORIG_R0 208
-#define PT_ORIG_P0 212
-#define PT_SYSCFG 216
-#define PT_TEXT_ADDR 220
-#define PT_TEXT_END_ADDR 224
-#define PT_DATA_ADDR 228
-#define PT_FDPIC_EXEC 232
-#define PT_FDPIC_INTERP 236
-
-#endif                         /* _BFIN_PTRACE_H */