*/
/*
- * Definitions for Configuring the monitor commands
+ * Definitions for Configuring the monitor commands
*/
#ifndef _CMD_CONFIG_H
#define _CMD_CONFIG_H
/*
* Configurable monitor commands
*/
-#define CFG_CMD_BDI 0x00000001 /* bdinfo */
-#define CFG_CMD_LOADS 0x00000002 /* loads */
-#define CFG_CMD_LOADB 0x00000004 /* loadb */
-#define CFG_CMD_IMI 0x00000008 /* iminfo */
-#define CFG_CMD_CACHE 0x00000010 /* icache, dcache */
-#define CFG_CMD_FLASH 0x00000020 /* flinfo, erase, protect */
-#define CFG_CMD_MEMORY 0x00000040 /* md, mm, nm, mw, cp, cmp, */
+#define CFG_CMD_BDI 0x00000001ULL /* bdinfo */
+#define CFG_CMD_LOADS 0x00000002ULL /* loads */
+#define CFG_CMD_LOADB 0x00000004ULL /* loadb */
+#define CFG_CMD_IMI 0x00000008ULL /* iminfo */
+#define CFG_CMD_CACHE 0x00000010ULL /* icache, dcache */
+#define CFG_CMD_FLASH 0x00000020ULL /* flinfo, erase, protect */
+#define CFG_CMD_MEMORY 0x00000040ULL /* md, mm, nm, mw, cp, cmp, */
/* crc, base, loop, mtest */
-#define CFG_CMD_NET 0x00000080 /* bootp, tftpboot, rarpboot */
-#define CFG_CMD_ENV 0x00000100 /* saveenv */
-#define CFG_CMD_KGDB 0x00000200 /* kgdb */
-#define CFG_CMD_PCMCIA 0x00000400 /* PCMCIA support */
-#define CFG_CMD_IDE 0x00000800 /* IDE harddisk support */
-#define CFG_CMD_PCI 0x00001000 /* pciinfo */
-#define CFG_CMD_IRQ 0x00002000 /* irqinfo */
-#define CFG_CMD_BOOTD 0x00004000 /* bootd */
-#define CFG_CMD_CONSOLE 0x00008000 /* coninfo */
-#define CFG_CMD_EEPROM 0x00010000 /* EEPROM read/write support */
-#define CFG_CMD_ASKENV 0x00020000 /* ask for env variable */
-#define CFG_CMD_RUN 0x00040000 /* run command in env variable */
-#define CFG_CMD_ECHO 0x00080000 /* echo arguments */
-#define CFG_CMD_I2C 0x00100000 /* I2C serial bus support */
-#define CFG_CMD_REGINFO 0x00200000 /* Register dump */
-#define CFG_CMD_IMMAP 0x00400000 /* IMMR dump support */
-#define CFG_CMD_DATE 0x00800000 /* support for RTC, date/time...*/
-#define CFG_CMD_DHCP 0x01000000 /* DHCP Support */
-#define CFG_CMD_BEDBUG 0x02000000 /* Include BedBug Debugger */
-#define CFG_CMD_FDC 0x04000000 /* Floppy Disk Support */
-#define CFG_CMD_SCSI 0x08000000 /* SCSI Support */
-#define CFG_CMD_AUTOSCRIPT 0x10000000 /* Autoscript Support */
-#define CFG_CMD_MII 0x20000000 /* MII support */
-#define CFG_CMD_SETGETDCR 0x40000000 /* DCR support on 4xx */
-#define CFG_CMD_BSP 0x80000000 /* Board Specific functions */
-
-#define CFG_CMD_ELF 0x0000000100000000 /* ELF (VxWorks) load/boot cmd */
-#define CFG_CMD_MISC 0x0000000200000000 /* Misc functions like sleep etc*/
-#define CFG_CMD_USB 0x0000000400000000 /* USB Support */
-#define CFG_CMD_DOC 0x0000000800000000 /* Disk-On-Chip Support */
-#define CFG_CMD_JFFS2 0x0000001000000000 /* JFFS2 Support */
-#define CFG_CMD_DTT 0x0000002000000000 /* Digital Therm and Thermostat */
-#define CFG_CMD_SDRAM 0x0000004000000000 /* SDRAM DIMM SPD info printout */
-#define CFG_CMD_DIAG 0x0000008000000000 /* Diagnostics */
-#define CFG_CMD_FPGA 0x0000010000000000 /* FPGA configuration Support */
-#define CFG_CMD_HWFLOW 0x0000020000000000 /* RTS/CTS hw flow control */
-#define CFG_CMD_SAVES 0x0000040000000000 /* save S record dump */
-#define CFG_CMD_SPI 0x0000100000000000 /* SPI utility */
-#define CFG_CMD_FDOS 0x0000200000000000 /* Floppy DOS support */
-#define CFG_CMD_VFD 0x0000400000000000 /* VFD support (TRAB) */
-#define CFG_CMD_NAND 0x0000800000000000 /* NAND support */
-#define CFG_CMD_BMP 0x0001000000000000 /* BMP support */
-#define CFG_CMD_PORTIO 0x0002000000000000 /* Port I/O */
-#define CFG_CMD_PING 0x0004000000000000 /* ping support */
-
-#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */
+#define CFG_CMD_NET 0x00000080ULL /* bootp, tftpboot, rarpboot */
+#define CFG_CMD_ENV 0x00000100ULL /* saveenv */
+#define CFG_CMD_KGDB 0x0000000000000200ULL /* kgdb */
+#define CFG_CMD_PCMCIA 0x00000400ULL /* PCMCIA support */
+#define CFG_CMD_IDE 0x00000800ULL /* IDE harddisk support */
+#define CFG_CMD_PCI 0x00001000ULL /* pciinfo */
+#define CFG_CMD_IRQ 0x00002000ULL /* irqinfo */
+#define CFG_CMD_BOOTD 0x00004000ULL /* bootd */
+#define CFG_CMD_CONSOLE 0x00008000ULL /* coninfo */
+#define CFG_CMD_EEPROM 0x00010000ULL /* EEPROM read/write support */
+#define CFG_CMD_ASKENV 0x00020000ULL /* ask for env variable */
+#define CFG_CMD_RUN 0x00040000ULL /* run command in env variable */
+#define CFG_CMD_ECHO 0x00080000ULL /* echo arguments */
+#define CFG_CMD_I2C 0x00100000ULL /* I2C serial bus support */
+#define CFG_CMD_REGINFO 0x00200000ULL /* Register dump */
+#define CFG_CMD_IMMAP 0x00400000ULL /* IMMR dump support */
+#define CFG_CMD_DATE 0x00800000ULL /* support for RTC, date/time...*/
+#define CFG_CMD_DHCP 0x01000000ULL /* DHCP Support */
+#define CFG_CMD_BEDBUG 0x02000000ULL /* Include BedBug Debugger */
+#define CFG_CMD_FDC 0x04000000ULL /* Floppy Disk Support */
+#define CFG_CMD_SCSI 0x08000000ULL /* SCSI Support */
+#define CFG_CMD_AUTOSCRIPT 0x10000000ULL /* Autoscript Support */
+#define CFG_CMD_MII 0x20000000ULL /* MII support */
+#define CFG_CMD_SETGETDCR 0x40000000ULL /* DCR support on 4xx */
+#define CFG_CMD_BSP 0x80000000ULL /* Board Specific functions */
+
+#define CFG_CMD_ELF 0x0000000100000000ULL /* ELF (VxWorks) load/boot cmd */
+#define CFG_CMD_MISC 0x0000000200000000ULL /* Misc functions like sleep etc*/
+#define CFG_CMD_USB 0x0000000400000000ULL /* USB Support */
+#define CFG_CMD_DOC 0x0000000800000000ULL /* Disk-On-Chip Support */
+#define CFG_CMD_JFFS2 0x0000001000000000ULL /* JFFS2 Support */
+#define CFG_CMD_DTT 0x0000002000000000ULL /* Digital Therm and Thermostat */
+#define CFG_CMD_SDRAM 0x0000004000000000ULL /* SDRAM DIMM SPD info printout */
+#define CFG_CMD_DIAG 0x0000008000000000ULL /* Diagnostics */
+#define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */
+#define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */
+#define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */
+#define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */
+#define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */
+#define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */
+#define CFG_CMD_NAND 0x0000800000000000ULL /* NAND support */
+#define CFG_CMD_BMP 0x0001000000000000ULL /* BMP support */
+#define CFG_CMD_PORTIO 0x0002000000000000ULL /* Port I/O */
+#define CFG_CMD_PING 0x0004000000000000ULL /* ping support */
+#define CFG_CMD_MMC 0x0008000000000000ULL /* MMC support */
+#define CFG_CMD_FAT 0x0010000000000000ULL /* FAT support */
+#define CFG_CMD_IMLS 0x0020000000000000ULL /* List all found images */
+#define CFG_CMD_ITEST 0x0040000000000000ULL /* Integer (and string) test */
+#define CFG_CMD_NFS 0x0080000000000000ULL /* NFS support */
+#define CFG_CMD_REISER 0x0100000000000000ULL /* Reiserfs support */
+#define CFG_CMD_CDP 0x0200000000000000ULL /* Cisco Discovery Protocol */
+#define CFG_CMD_XIMG 0x0400000000000000ULL /* Load part of Multi Image */
+#define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support */
+#define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */
+#define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */
+#define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */
+#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */
+
+#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */
/* Commands that are considered "non-standard" for some reason
* (memory hogs, requires special hardware, not fully tested, etc.)
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_CACHE | \
+ CFG_CMD_CDP | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
+ CFG_CMD_DISPLAY | \
CFG_CMD_DOC | \
CFG_CMD_DTT | \
- CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
CFG_CMD_FDC | \
+ CFG_CMD_FAT | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
+ CFG_CMD_MFSL | \
CFG_CMD_MII | \
+ CFG_CMD_MMC | \
CFG_CMD_NAND | \
CFG_CMD_PCI | \
CFG_CMD_PCMCIA | \
CFG_CMD_PING | \
+ CFG_CMD_PORTIO | \
CFG_CMD_REGINFO | \
+ CFG_CMD_REISER | \
CFG_CMD_SAVES | \
CFG_CMD_SCSI | \
CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP | \
CFG_CMD_SPI | \
+ CFG_CMD_UNIVERSE | \
CFG_CMD_USB | \
CFG_CMD_VFD )
#endif
-
/*
* optional BOOTP fields
*/
#define CONFIG_BOOTP_BOOTPATH 0x00000010
#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
#define CONFIG_BOOTP_DNS 0x00000040
+#define CONFIG_BOOTP_DNS2 0x00000080
+#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100
+#define CONFIG_BOOTP_NTPSERVER 0x00000200
+#define CONFIG_BOOTP_TIMEOFFSET 0x00000400
#define CONFIG_BOOTP_VENDOREX 0x80000000