dataflash: fix parameters order in write_dataflash()

[karo-tx-uboot.git] / include / commproc.h

diff --git a/include/commproc.h b/include/commproc.h
index 12decfeaa57abb3b61492a7370073e58e00275c8..8b8cc45dadfa03b7098621aa6810e8c642652841 100644 (file)
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -108,7 +108,7 @@ typedef struct cpm_buf_desc {
        uint    cbd_bufaddr;    /* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY    ((ushort)0x8000)        /* Recieve is empty */
+#define BD_SC_EMPTY    ((ushort)0x8000)        /* Receive is empty */
 #define BD_SC_READY    ((ushort)0x8000)        /* Transmit is ready */
 #define BD_SC_WRAP     ((ushort)0x2000)        /* Last buffer descriptor */
 #define BD_SC_INTRPT   ((ushort)0x1000)        /* Interrupt on change */
@@ -579,34 +579,6 @@ typedef struct scc_enet {
 
 /*********************************************************************/
 
-
-/***  CCM  and  PCU E  ***********************************************/
-
-/* The PCU E  and  CCM  use the FEC on a MPC860T for Ethernet */
-
-#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
-
-#define        FEC_ENET        /* use FEC for EThernet */
-#undef SCC_ENET
-
-#define PD_MII_TXD1    ((ushort)0x1000)        /* PD  3 */
-#define PD_MII_TXD2    ((ushort)0x0800)        /* PD  4 */
-#define PD_MII_TXD3    ((ushort)0x0400)        /* PD  5 */
-#define PD_MII_RX_DV   ((ushort)0x0200)        /* PD  6 */
-#define PD_MII_RX_ERR  ((ushort)0x0100)        /* PD  7 */
-#define PD_MII_RX_CLK  ((ushort)0x0080)        /* PD  8 */
-#define PD_MII_TXD0    ((ushort)0x0040)        /* PD  9 */
-#define PD_MII_RXD0    ((ushort)0x0020)        /* PD 10 */
-#define PD_MII_TX_ERR  ((ushort)0x0010)        /* PD 11 */
-#define PD_MII_MDC     ((ushort)0x0008)        /* PD 12 */
-#define PD_MII_RXD1    ((ushort)0x0004)        /* PD 13 */
-#define PD_MII_RXD2    ((ushort)0x0002)        /* PD 14 */
-#define PD_MII_RXD3    ((ushort)0x0001)        /* PD 15 */
-
-#define PD_MII_MASK    ((ushort)0x1FFF)        /* PD 3...15 */
-
-#endif /* CONFIG_PCU_E, CONFIG_CCM */
-
 /***  ELPT860 *********************************************************/
 
 #ifdef CONFIG_ELPT860
@@ -828,38 +800,6 @@ typedef struct scc_enet {
 
 #endif /* CONFIG_GENIETV */
 
-/*** GTH ******************************************************/
-
-#ifdef CONFIG_GTH
-#ifdef CONFIG_FEC_ENET
-#define        FEC_ENET        /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
-#define        PROFF_ENET      PROFF_SCC1
-#define        CPM_CR_ENET     CPM_CR_CH_SCC1
-#define        SCC_ENET        0
-
-#define PA_ENET_RXD    ((ushort)0x0001) /* PA15 */
-#define PA_ENET_TXD    ((ushort)0x0002) /* PA14 */
-#define PA_ENET_TCLK   ((ushort)0x0800) /* PA4 */
-#define PA_ENET_RCLK   ((ushort)0x0400) /* PA5 */
-
-#define PB_ENET_TENA   ((uint)0x00001000) /* PB19 */
-
-#define PC_ENET_CLSN   ((ushort)0x0010) /* PC11 */
-#define PC_ENET_RENA   ((ushort)0x0020) /* PC10 */
-
-/* NOTE. This is reset for 10Mbit port only */
-#define PC_ENET_RESET  ((ushort)0x0100)        /* PC 7 */
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-
-/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
-#define SICR_ENET_CLKRT        ((uint)0x00000037)
-
-#endif /* CONFIG_GTH */
-
 /*** HERMES-PRO ******************************************************/
 
 /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
@@ -1122,11 +1062,11 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT        ((uint)0x0000003d)
 #endif /* CONFIG_MBX */
 
-/***  MGSUVD  *********************************************************/
+/***  KM8XX  *********************************************************/
 
-/* The MGSUVD Service Module uses SCC3 for Ethernet */
+/* The KM8XX Service Module uses SCC3 for Ethernet */
 
-#ifdef CONFIG_MGSUVD
+#ifdef CONFIG_KM8XX
 #define PROFF_ENET     PROFF_SCC3              /* Ethernet on SCC3 */
 #define CPM_CR_ENET    CPM_CR_CH_SCC3
 #define SCC_ENET       2
@@ -1145,7 +1085,7 @@ typedef struct scc_enet {
  */
 #define SICR_ENET_MASK ((uint)0x00FF0000)
 #define SICR_ENET_CLKRT        ((uint)0x00250000)
-#endif /* CONFIG_MGSUVD */
+#endif /* CONFIG_KM8XX */
 
 
 /***  MHPC  ********************************************************/