net: cosmetic: Split struct ip_udp_hdr into ip_hdr

[karo-tx-uboot.git] / include / config_cmd_all.h

diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index c5e0d268e3ace8f521b28225749cd0c5962e893c..55f4f7a30b2a8a3227c021cf2ece323c1dda4f37 100644 (file)
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -19,6 +19,7 @@
 #define CONFIG_CMD_BEDBUG      /* Include BedBug Debugger      */
 #define CONFIG_CMD_BMP         /* BMP support                  */
 #define CONFIG_CMD_BOOTD       /* bootd                        */
+#define CONFIG_CMD_BOOTZ       /* boot zImage                  */
 #define CONFIG_CMD_BSP         /* Board Specific functions     */
 #define CONFIG_CMD_CACHE       /* icache, dcache               */
 #define CONFIG_CMD_CDP         /* Cisco Discovery Protocol     */
@@ -30,9 +31,9 @@
 #define CONFIG_CMD_DOC         /* Disk-On-Chip Support         */
 #define CONFIG_CMD_DTT         /* Digital Therm and Thermostat */
 #define CONFIG_CMD_ECHO                /* echo arguments               */
+#define CONFIG_CMD_EDITENV     /* editenv                      */
 #define CONFIG_CMD_EEPROM      /* EEPROM read/write support    */
 #define CONFIG_CMD_ELF         /* ELF (VxWorks) load/boot cmd  */
-#define CONFIG_CMD_SAVEENV     /* saveenv                      */
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_FDC         /* Floppy Disk Support          */
@@ -54,6 +55,7 @@
 #define CONFIG_CMD_LOADS       /* loads                        */
 #define CONFIG_CMD_MEMORY      /* md mm nm mw cp cmp crc base loop mtest */
 #define CONFIG_CMD_MFSL                /* FSL support for Microblaze   */
+#define CONFIG_CMD_MG_DISK     /* mGine m(g)flash IO node support */
 #define CONFIG_CMD_MII         /* MII support                  */
 #define CONFIG_CMD_MISC                /* Misc functions like sleep etc*/
 #define CONFIG_CMD_MMC         /* MMC support                  */
@@ -68,7 +70,9 @@
 #define CONFIG_CMD_PORTIO      /* Port I/O                     */
 #define CONFIG_CMD_REGINFO     /* Register dump                */
 #define CONFIG_CMD_REISER      /* Reiserfs support             */
+#define CONFIG_CMD_RARP                /* rarpboot support             */
 #define CONFIG_CMD_RUN         /* run command in env variable  */
+#define CONFIG_CMD_SAVEENV     /* saveenv                      */
 #define CONFIG_CMD_SAVES       /* save S record dump           */
 #define CONFIG_CMD_SCSI                /* SCSI Support                 */
 #define CONFIG_CMD_SDRAM       /* SDRAM DIMM SPD info printout */
@@ -78,11 +82,11 @@
 #define CONFIG_CMD_SOURCE      /* "source" command support     */
 #define CONFIG_CMD_SPI         /* SPI utility                  */
 #define CONFIG_CMD_TERMINAL    /* built-in Serial Terminal     */
+#define CONFIG_CMD_UBI         /* UBI Support                  */
+#define CONFIG_CMD_UBIFS       /* UBIFS Support                */
 #define CONFIG_CMD_UNIVERSE    /* Tundra Universe Support      */
 #define CONFIG_CMD_UNZIP       /* unzip from memory to memory  */
 #define CONFIG_CMD_USB         /* USB Support                  */
-#define CONFIG_CMD_VFD         /* VFD support (TRAB)           */
 #define CONFIG_CMD_XIMG                /* Load part of Multi Image     */
-#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support     */
 
 #endif /* _CONFIG_CMD_ALL_H */