Blackfin: post: drop custom test list

[karo-tx-uboot.git] / include / configs / CPCI750.h

diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 8494faac29c1c3752c4a7064322fa5f13fa1cf11..92ffaaaf19e6a19b3d860c1382ccd8863f556ee1 100644 (file)
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -57,9 +57,11 @@
 
 #define CONFIG_CPCI750         1       /* this is an CPCI750 board     */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_BAUDRATE                9600    /* console baudrate = 9600      */
 
-#undef CONFIG_ECC                      /* enable ECC support */
+#define CONFIG_MV64360_ECC             /* enable ECC support */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
@@ -76,7 +78,8 @@
 
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
-#define CONFIG_AUTO_COMPLETE 1
+#define CONFIG_CMDLINE_EDITING         /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 /* Define which ETH port will be used for connecting the network */
 #define CONFIG_SYS_ETH_PORT            ETH_0
@@ -233,8 +236,7 @@
 #define CONFIG_SYS_LOAD_ADDR           0x00300000      /* default load address */
 
 #define CONFIG_SYS_HZ                  1000            /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ              133000000       /* 133 MHz (CPU = 5*Bus = 666MHz)               */
-#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK             133000000       /* 133 MHz (CPU = 5*Bus = 666MHz)               */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -264,9 +266,8 @@
 /* #define CONFIG_SYS_INIT_RAM_ADDR    0x40000000*/ /* unused memory region */
 /* #define CONFIG_SYS_INIT_RAM_ADDR    0xfba00000*/ /* unused memory region */
 #define CONFIG_SYS_INIT_RAM_ADDR       0xf1080000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_END        0x1000
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
@@ -616,14 +617,10 @@
 
 #define L2_ENABLE      (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                  */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
+#define CPCI750_SLAVE_TEST     (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
+#define CPCI750_ECC_TEST       (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
+#define CONFIG_SYS_PLD_VER     0xf0e00000
+
 #endif /* __CONFIG_H */