rename CFG_ENV macros to CONFIG_ENV

[karo-tx-uboot.git] / include / configs / IP860.h

diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 649096274f39078dbcf853feb8ed0646b7cf1a03..c0bf3673028df2736d4d43d2829933bd4c90b12a 100644 (file)
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -35,22 +35,20 @@
 
 #define CONFIG_MPC860          1       /* This is a MPC860 CPU         */
 #define CONFIG_IP860           1       /* ...on a IP860 board          */
-#define CONFIG_BOARD_PRE_INIT  1           /* Call board_pre_init      */
+#define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f      */
 
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
 #define CONFIG_BAUDRATE                9600
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
-#define        CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \
-"\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0"
+#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" \
+"\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 ${filesize}\0"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND                                                     \
        "bootp; "                                                               \
-       "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "     \
-       "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
        "bootm"
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
@@ -88,26 +86,34 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS     4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10      /* takes up to 10 msec */
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_BEDBUG | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_EEPROM)
+#define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
-#define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/*----------------------------------------------------------------------*/
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
 
-/*----------------------------------------------------------------------*/
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
 
 /*
  * Miscellaneous configurable options
  */
 #define        CFG_LONGHELP                    /* undef to save memory         */
 #define        CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -180,27 +186,27 @@
 #define CFG_FLASH_ERASE_TOUT   120000  /* Timeout for Flash Erase (in ms)      */
 #define CFG_FLASH_WRITE_TOUT   500     /* Timeout for Flash Write (in ms)      */
 
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#undef  CFG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef  CONFIG_ENV_IS_IN_NVRAM
 #undef DEBUG_I2C
-#define        CFG_ENV_IS_IN_EEPROM
+#define        CONFIG_ENV_IS_IN_EEPROM
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR           0x20000000      /* use SRAM     */
-#define CFG_ENV_SIZE           (16<<10)        /* use 16 kB    */
-#endif /* CFG_ENV_IS_IN_NVRAM */
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_ADDR                0x20000000      /* use SRAM     */
+#define CONFIG_ENV_SIZE                (16<<10)        /* use 16 kB    */
+#endif /* CONFIG_ENV_IS_IN_NVRAM */
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET          512    /* Leave 512 bytes free for other data  */
-#define CFG_ENV_SIZE           1536    /* Use remaining space                  */
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET               512    /* Leave 512 bytes free for other data  */
+#define CONFIG_ENV_SIZE                1536    /* Use remaining space                  */
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif