New board support: Nokia RX-51 aka N900

[karo-tx-uboot.git] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 31503af5d239eb9d37142e6f1e868d69f3ba9fe6..fd80be59042d7c993b0a36a7d0b2c84b1d3bd0a7 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -82,7 +82,8 @@
 
 #define CONFIG_SYS_CLK_FREQ    CONFIG_83XX_CLKIN
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R              /* call board_early_init_r */
 
 #define CONFIG_SYS_IMMR                0xE0000000
 
@@ -266,7 +267,7 @@
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT                 "nand0=e2800000.flash"
 #define MTDPARTS_DEFAULT               \
-       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+       "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
@@ -363,6 +364,9 @@
 #define CONFIG_OF_BOARD_SETUP  1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
+#define CONFIG_MPC83XX_GPIO 1
+#define CONFIG_CMD_GPIO 1
+
 /*
  * Serial Port
  */
@@ -379,7 +383,6 @@
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /* I2C */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support*/
@@ -581,7 +584,8 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH       (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
-#define CONFIG_SYS_SICRL       SICRL_USBDR_10  /* Enable Internal USB Phy  */
+                       /* Enable Internal USB Phy and GPIO on LCD Connector */
+#define CONFIG_SYS_SICRL       (SICRL_USBDR_10 | SICRL_LBC)
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
 #define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
@@ -673,19 +677,21 @@
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 
-#define XMK_STR(x)     #x
-#define MK_STR(x)      XMK_STR(x)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                                    \
        "ethprime=TSEC1\0"                                              \
        "uboot=" CONFIG_UBOOTPATH "\0"                                  \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
-               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
-               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
+               "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+                       " +$filesize; " \
+               "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+                       " +$filesize; " \
+               "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+                       " $filesize; "  \
+               "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+                       " +$filesize; " \
+               "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+                       " $filesize\0"  \
        "fdtaddr=780000\0"                                              \
        "fdtfile=" CONFIG_FDTFILE "\0"                                  \
        "console=ttyS0\0"                                               \
@@ -712,7 +718,4 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#undef MK_STR
-#undef XMK_STR
-
 #endif /* __CONFIG_H */