s5pc1xx: update cache routines

[karo-tx-uboot.git] / include / configs / MPC8315ERDB.h

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e03a1077ff5c6db4ebb8260e63f6b454ee0661b9..8eaff5d06f4dad051b09498c1fc156fd5f1a1348 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -72,6 +72,7 @@
 #define CONFIG_SYS_SICRL               0x00000000 /* 3.3V, no delay */
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_HWCONFIG
 
 /*
  * IMMR new address
@@ -181,7 +182,8 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV         LCRR_CLKDIV_2
 #define CONFIG_SYS_LBC_LBCR            0x00040000
 
 /*
@@ -226,6 +228,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_BR1_PRELIM  ( CONFIG_SYS_NAND_BASE \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
@@ -330,8 +333,7 @@
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00800000
 
 #define CONFIG_PCI
-#define CONFIG_83XX_GENERIC_PCI        1 /* Use generic PCI setup */
-#define CONFIG_83XX_GENERIC_PCIE       1
+#define CONFIG_PCIE
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
@@ -565,7 +567,7 @@
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
@@ -575,7 +577,7 @@
    "consoledev=ttyS0\0"                                                        \
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
-   "fdtaddr=400000\0"                                                  \
+   "fdtaddr=780000\0"                                                  \
    "fdtfile=mpc8315erdb.dtb\0"                                         \
    "usb_phy_type=utmi\0"                                               \
    ""