ARM: tegra: enable some CPU errata workarounds

[karo-tx-uboot.git] / include / configs / SIMPC8313.h

diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index b1ed254fe665fc0f5686a4780183dde1018ad3ef..c0ffb33129d6bad831b6cb6a7297e709765f129e 100644 (file)
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -144,33 +144,32 @@
 #endif
 #define CONFIG_SYS_FPGA_BASE           0xFF000000
 
+#define CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS                 1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
 
 #define CONFIG_SYS_NAND_BR_PRELIM      (CONFIG_SYS_NAND_BASE \
-                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_DECC_CHK_GEN       /* Use HW ECC */ \
                                | BR_PS_8               /* 8 bit Port */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
 
 #ifdef CONFIG_NAND_SP
-#define CONFIG_SYS_NAND_OR_PRELIM      (0xFFFF8000     /* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM      (OR_AM_32KB \
                                        | OR_FCM_CSCT \
                                        | OR_FCM_CST \
                                        | OR_FCM_CHT \
                                        | OR_FCM_SCY_1 \
                                        | OR_FCM_TRLX \
                                        | OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM     0x8000000E      /* 32KB */
-#define CONFIG_SYS_NAND_PAGE_SIZE      (512)   /* NAND chip page size */
+#define CONFIG_SYS_LBLAWAR0_PRELIM     (LBLAWAR_EN | LBLAWAR_32KB)
+#define CONFIG_SYS_NAND_PAGE_SIZE      512     /* NAND chip page size */
                                        /* NAND chip block size */
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (16 << 10)
 #define NAND_CACHE_PAGES               32
 #elif defined(CONFIG_NAND_LP)
-#define CONFIG_SYS_NAND_OR_PRELIM      (0xFFFC0000     /* length 256K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM      (OR_AM_256KB \
                                        | OR_FCM_PGS \
                                        | OR_FCM_CSCT \
                                        | OR_FCM_CST \
@@ -178,8 +177,8 @@
                                        | OR_FCM_SCY_1 \
                                        | OR_FCM_TRLX \
                                        | OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM     0x80000011      /* 256KB */
-#define CONFIG_SYS_NAND_PAGE_SIZE      (2048)  /* NAND chip page size */
+#define CONFIG_SYS_LBLAWAR0_PRELIM     (LBLAWAR_EN | LBLAWAR_256KB)
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048    /* NAND chip page size */
                                        /* NAND chip block size */
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 << 10)
 #define NAND_CACHE_PAGES               64
@@ -243,7 +242,6 @@
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 /* I2C */
 #define CONFIG_HARD_I2C                /* I2C with hardware support*/
@@ -447,26 +445,26 @@
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /* DDR @ 0x00000000 */
-#define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
 #define CONFIG_SYS_IBAT0U      (CONFIG_SYS_SDRAM_BASE \
                                | BATU_BL_256M \
                                | BATU_VS \
                                | BATU_VP)
 #define CONFIG_SYS_IBAT1L      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
-                               | BATL_PP_10)
+                               | BATL_PP_RW)
 #define CONFIG_SYS_IBAT1U      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
                                | BATU_BL_256M \
                                | BATU_VS \
                                | BATU_VP)
 
 /* PCI @ 0x80000000 */
-#define CONFIG_SYS_IBAT2L      (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT2L      (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
 #define CONFIG_SYS_IBAT2U      (CONFIG_SYS_PCI1_MEM_BASE \
                                | BATU_BL_256M \
                                | BATU_VS \
                                | BATU_VP)
 #define CONFIG_SYS_IBAT3L      (CONFIG_SYS_PCI1_MMIO_BASE \
-                               | BATL_PP_10 \
+                               | BATL_PP_RW \
                                | BATL_CACHEINHIBIT \
                                | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT3U      (CONFIG_SYS_PCI1_MMIO_BASE \
@@ -480,7 +478,7 @@
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 #define CONFIG_SYS_IBAT5L      (CONFIG_SYS_IMMR \
-                               | BATL_PP_10 \
+                               | BATL_PP_RW \
                                | BATL_CACHEINHIBIT \
                                | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT5U      (CONFIG_SYS_IMMR \
@@ -490,7 +488,7 @@
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 #define CONFIG_SYS_IBAT6L      (0xF0000000 \
-                               | BATL_PP_10 \
+                               | BATL_PP_RW \
                                | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_IBAT6U      (0xF0000000 \
                                | BATU_BL_256M \
@@ -539,19 +537,21 @@
 #define CONFIG_BOOTCOMMAND     "nand read $loadaddr kernel 600000;" \
                                        "bootm $loadaddr - $fdtaddr"
 
-#define XMK_STR(x)     #x
-#define MK_STR(x)      XMK_STR(x)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                                    \
        "ethprime=TSEC1\0"                                              \
        "uboot=" CONFIG_UBOOTPATH "\0"                                  \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
-               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
-               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
-               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
-               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
+               "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+                       " +$filesize; " \
+               "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+                       " +$filesize; " \
+               "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+                       " $filesize; "  \
+               "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+                       " +$filesize; " \
+               "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+                       " $filesize\0"  \
        "fdtaddr=ae0000\0"                                              \
        "fdtfile=" CONFIG_FDTFILE "\0"                                  \
        "console=ttyS0\0"                                               \
@@ -594,7 +594,4 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#undef MK_STR
-#undef XMK_STR
-
 #endif /* __CONFIG_H */