OMAP3: igep00x0: add boot status GPIO LED

[karo-tx-uboot.git] / include / configs / Total5200.h

diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 7510ab10e4db73f2eb4b5f7215529fd5cefe1658..16b2dacc6c187920997b5fe3e2ca887d8bb53ffa 100644 (file)
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -44,10 +44,17 @@
 #define CONFIG_MPC5200         1       /* (more precisely a MPC5200 CPU) */
 #define CONFIG_TOTAL5200       1       /* ... on Total5200 board */
 
-#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFFF00000  boot high (standard configuration)
+ * 0xFE000000  boot low
+ * 0x00100000  boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+#endif
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
@@ -92,7 +99,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
@@ -132,7 +138,7 @@
 #define CONFIG_CMD_USB
 
 
-#if (TEXT_BASE == 0xFE000000)          /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)               /* Boot low */
 #   define CONFIG_SYS_LOWBOOT          1
 #endif
 
@@ -239,13 +245,12 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif