/*
- * (C) Copyright 2005-2007
+ * (C) Copyright 2005-2008
* Samsung Electronics,
* Kyungmin Park <kyungmin.park@samsung.com>
*
/* Clock config to target*/
#define PRCM_CONFIG_I 1
-//#define PRCM_CONFIG_II 1
+/* #define PRCM_CONFIG_II 1 */
/* Boot method */
/* uncomment if you use NOR boot */
-//#define CFG_NOR_BOOT 1
+/* #define CFG_NOR_BOOT 1 */
/* uncomment if you use NOR on CS3 */
-//#define CFG_USE_NOR 1
+/* #define CFG_USE_NOR 1 */
#ifdef CFG_NOR_BOOT
#undef CFG_USE_NOR
#define CFG_I2C_SLAVE 1
#define CONFIG_DRIVER_OMAP24XX_I2C
-/* allow to overwrite serial and ethaddr */
+/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \
"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
"onesyncboot=run syncmode oneboot\0" \
+ "updateb=tftp 0x80180000 u-boot-onenand.bin; onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
"bootcmd=run uboot\0"
/*
#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
- * or by 32KHz clk, or from external sig. This rate is divided by a local
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
+ * or by 32KHz clk, or from external sig. This rate is divided by a local
* divisor.
*/
#define V_PVT 7 /* use with 12MHz/128 */
/*-----------------------------------------------------------------------
* Stack sizes
*
- * The stack sizes are set up in start.S using the settings below
+ * The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE SZ_128K /* regular stack */
#ifdef CONFIG_USE_IRQ
*/
# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
# define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-//#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/
#else /* !CFG_USE_NOR */