arm/km: update mgcoge3un board support

[karo-tx-uboot.git] / include / configs / at91cap9adk.h

diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 363df67b572073dacaa7e46fc2b3ae82f786a9e9..49c923f163dc66a769061b7ad2ed3432bb67fdc6 100644 (file)
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -27,19 +27,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* ARM asynchronous clock */
-#define AT91_CPU_NAME          "AT91CAP9"
-#define AT91_MAIN_CLOCK                12000000        /* 12 MHz crystal */
-#define AT91_MASTER_CLOCK      100000000       /* peripheral */
-#define AT91_CPU_CLOCK         200000000       /* cpu */
-#define CONFUG_SYS_AT91_PLLB   0x10073e01      /* PLLB settings for USB */
-#define CONFIG_SYS_HZ          1000000         /* 1us resolution */
+#define CONFIG_AT91_LEGACY
 
-#define AT91_SLOW_CLOCK                32768   /* slow clock */
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
+#define CONFIG_SYS_HZ          1000
 
 #define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
 #define CONFIG_AT91CAP9                1       /* It's an Atmel AT91CAP9 SoC   */
 #define CONFIG_AT91CAP9ADK     1       /* on an AT91CAP9ADK Board      */
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
@@ -47,11 +44,11 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -70,6 +67,12 @@
 #define CONFIG_ATMEL_LCD_BGR555                1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV           1
 
+/* LED */
+#define CONFIG_AT91_LED
+#define        CONFIG_RED_LED          AT91_PIN_PC29   /* this is the power led */
+#define        CONFIG_GREEN_LED        AT91_PIN_PA10   /* this is the user1 led */
+#define        CONFIG_YELLOW_LED       AT91_PIN_PA11   /* this is the user1 led */
+
 #define CONFIG_BOOTDELAY       3
 
 /*
@@ -85,10 +88,10 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
@@ -101,6 +104,7 @@
 #define PHYS_SDRAM_SIZE                        0x04000000      /* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH           1
 #define CONFIG_SYS_SPI_WRITE_TOUT              (5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         1
@@ -116,13 +120,21 @@
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT              256
 #define CONFIG_SYS_MAX_FLASH_BANKS             1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE               (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PD15
 
 /* NAND flash */
-#define NAND_MAX_CHIPS                 1
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   0x40000000
 #define CONFIG_SYS_NAND_DBW_8                  1
 
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
@@ -131,8 +143,8 @@
 #define CONFIG_RESET_PHY_R             1
 
 /* USB */
+#define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW            1
-#define LITTLEENDIAN                   1
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00700000      /* AT91_BASE_UHP */
@@ -161,7 +173,7 @@
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 \
                                "root=/dev/mtdblock1 "                  \
                                "mtdparts=physmap-flash.0:-(nor);"      \
-                               "at91_nand:-(root) "                    \
+                               "atmel_nand:-(root) "                   \
                                "rw rootfstype=jffs2"
 
 #else
@@ -177,7 +189,7 @@
                                "root=/dev/mtdblock4 "                  \
                                "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
                                "16k(env),224k(uboot)ro,-(linux);"      \
-                               "at91_nand:-(root) "                    \
+                               "atmel_nand:-(root) "                   \
                                "rw rootfstype=jffs2"
 
 #endif
@@ -192,12 +204,10 @@
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
 
-#define ROUND(A, B)            (((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE       (32*1024)       /* regular stack */