Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settings

[karo-tx-uboot.git] / include / configs / cm-bf537e.h

diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 34d429935ea6930ad65b377656f8d9d3284b1891..04bca6cb292ebf87fe6f0a57900b28959974d6f7 100644 (file)
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15                                          */
 #define CONFIG_SCLK_DIV                        4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -86,13 +89,12 @@
  * Env Storage Settings
  */
 #define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET      0x4000
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_OFFSET      0x8000
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE   0x8000
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
-#else
-#define ENV_IS_EMBEDDED_CUSTOM
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -101,13 +103,10 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       cpu/blackfin/traps.o            (.text .text.*); \
-       cpu/blackfin/interrupt.o        (.text .text.*); \
-       cpu/blackfin/serial.o           (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib_generic/crc32.o             (.text .text.*); \
+       arch/blackfin/lib/libblackfin.o (.text*); \
+       arch/blackfin/cpu/libblackfin.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
@@ -116,8 +115,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C    1
 #define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
 
 
 /*
@@ -127,6 +124,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
+#define CONFIG_BOOTCOMMAND     "run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+       "flashboot=flread 20040000 1000000 3c0000;" \
+       "bootm 0x1000000\0"
 
 
 /*