Switch from archive libraries to partial linking

[karo-tx-uboot.git] / include / configs / csb637.h

diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index e1cdc7f66ec1cb09ec1bf446965e63d61ec13206..7a85d65302060ba1211b6da43938964d407d4c8d 100644 (file)
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -26,6 +26,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK       184320000       /* from 3.6864 MHz crystal (3686400 * 50) */
 #define AT91C_MASTER_CLOCK     46080000        /* (AT91C_MAIN_CLOCK/4) peripheral clock */
@@ -45,11 +47,6 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
 /* flash */
-#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
-#define CONFIG_SYS_MC_PUP_VAL  0x00000000
-#define CONFIG_SYS_MC_PUER_VAL 0x00000000
-#define CONFIG_SYS_MC_ASR_VAL  0x00000000
-#define CONFIG_SYS_MC_AASR_VAL 0x00000000
 #define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
 #define CONFIG_SYS_SMC_CSR0_VAL        0x00003284 /* 16bit, 2 TDF, 4 WS */
 
@@ -72,14 +69,11 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE 115200
 
@@ -121,38 +115,6 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_PING
 
-#ifdef NAND_SUPPORT_HAS_BEEN_FIXED     /* NAND support is broken / unimplemented */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN    0x00
-#define NAND_MAX_FLOORS 1
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-
-#include <asm/arch/AT91RM9200.h>       /* needed for port definitions */
-#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-
-#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-
-#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */
 
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM                     0x20000000
@@ -163,7 +125,13 @@
 #define CONFIG_SYS_ALT_MEMTEST                 1
 #define CONFIG_SYS_MEMTEST_SCRATCH             CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
 
-#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_MULTI               1
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC         1
+#define CONFIG_SYS_RX_ETH_BUFFER       8
+#else
+#define CONFIG_DRIVER_ETHER            1
+#endif
 #define CONFIG_NET_RETRY_COUNT         20
 #undef CONFIG_AT91C_USE_RMII