kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define

[karo-tx-uboot.git] / include / configs / devkit8000.h

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 182a1375dc3eeb733606f6a8a9f12785ab5f6649..1c69551d16ae31cb3dda2924edf88d261f972c78 100644 (file)
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -33,30 +33,17 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
 
-#include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-#define CONFIG_SDRC    /* The chip has SDRC controller */
 #define CONFIG_NAND
-#define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
-                                                       /* to access nand at */
-                                                       /* CS0 */
 
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS           2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1                   OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2                   OMAP34XX_SDRC_CS1
 
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_omap3_common.h>
 
 /* Display CPU and Board information */
 #define CONFIG_DISPLAY_CPUINFO         1
 #define CONFIG_DISPLAY_BOARDINFO       1
 
-/* Clock Defines */
-#define V_OSCK                         26000000        /* Clock output from T2 */
-#define V_SCLK                         (V_OSCK >> 1)
-
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_REVISION_TAG            1
@@ -78,19 +65,6 @@
 #define CONFIG_DM9000_NO_SROM          1
 #undef CONFIG_DM9000_DEBUG
 
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         48000000 /* 48MHz (APLL96/2) */
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX              3
-#define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
-#define CONFIG_SERIAL3                 3
-#define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
-                                       115200}
-
 /* SPI */
 #undef CONFIG_SPI
 #undef CONFIG_OMAP3_SPI
@@ -100,7 +74,6 @@
 #define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
-#define CONFIG_TWL4030_POWER           1
 #define CONFIG_TWL4030_LED             1
 
 /* Board NAND Info */
@@ -225,16 +198,7 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
                                        0x01000000) /* 16MB */
 
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
-
 /* NAND and environment organization  */
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
-
 #define CONFIG_ENV_IS_IN_NAND          1
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
@@ -245,14 +209,10 @@
 #define CONFIG_SYS_SRAM_SIZE               0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL_NAND_SIMPLE
-
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
 #undef CONFIG_SPL_MTD_SUPPORT
 
+#undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
 #undef CONFIG_SPL_STACK
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
@@ -287,6 +247,7 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x8   /* address 0x1000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8     /* 4KB */
 
+#undef CONFIG_SYS_SPL_ARGS_ADDR
 #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
 
 #endif /* __CONFIG_H */