at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / eb_cpux9k2.h

diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 4324172a8e22040e8cf8ae4d6b0d36084190b206..3be4929fc2c85e488430839a5217852340e587a8 100644 (file)
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -41,15 +41,25 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F
 
+#define MACH_TYPE_EB_CPUX9K2           1977
+#define CONFIG_MACH_TYPE               MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE      32
+#define CONFIG_SYS_DCACHE_OFF
+
 /*--------------------------------------------------------------------------*/
-#define CONFIG_SYS_TEXT_BASE           0x00000000
+#ifndef CONFIG_RAMBOOT
+#define CONFIG_SYS_TEXT_BASE           0x00000000
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE           0x21f00000
+#endif
 #define CONFIG_SYS_LOAD_ADDR           0x21000000  /* default load address */
 
 #define CONFIG_SYS_BOOT_SIZE           0x00 /* 0 KBytes */
 #define CONFIG_SYS_U_BOOT_BASE         PHYS_FLASH_1
 #define CONFIG_SYS_U_BOOT_SIZE         0x60000 /* 384 KBytes */
 
-
 #define CONFIG_BOOT_RETRY_TIME         30
 #define CONFIG_CMDLINE_EDITING
 
@@ -59,8 +69,6 @@
 #define CONFIG_SYS_PBSIZE      \
        (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CONFIG_STACKSIZE       (32*1024)       /* regular stack */
-
 /*
  * ARM asynchronous clock
  */
@@ -137,6 +145,8 @@
 #define CONFIG_CMD_PING
 #define CONFIG_I2C_CMD_NO_FLAT
 #define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
 
 #define CONFIG_SYS_LONGHELP
 
@@ -167,13 +177,23 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_AT91C_PQFP_UHPBUG
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_EFI_PARTITION
+
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91rm9200"
 
 /*
  * UART/CONSOLE
  */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200, 19200, 38400, 57600, 9600 }
-
 #define CONFIG_BAUDRATE 115200
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE      ATMEL_BASE_DBGU
@@ -268,13 +288,10 @@
 
 /* NAND */
 
-#define CONFIG_SYS_NAND_MAX_CHIPS      1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_DBW_8          1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-
 /* Status LED's */
 
 #define CONFIG_STATUS_LED              1