Add console command to access io space registers

[karo-tx-uboot.git] / include / configs / ep82xxm.h

diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 239ff6733091eaf9470a7fcfddc0974a5b3d58bb..8d78921f6b560a46c67a348a9b78d8d57df99e6e 100644 (file)
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -31,6 +31,8 @@
 #define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
                        /* 256MB SDRAM / 64MB FLASH */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f */
 
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
@@ -65,7 +67,6 @@
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
 #undef CONFIG_ETHER_NONE               /* No external Ethernet   */
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_ETHER_ON_FCC2
 #define CONFIG_ETHER_ON_FCC3
@@ -85,6 +86,7 @@
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT              0       /* Not used - implemented in BCSR */
+
 #define MDIO_ACTIVE            (*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
 #define MDIO_TRISTATE          (*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
 #define MDIO_READ              (*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
@@ -146,7 +148,7 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 #define CONFIG_ENV_IN_OWN_SECT 1
 #define CONFIG_AUTO_COMPLETE   1
-#define        CONFIG_EXTRA_ENV_SETTINGS       "ethprime=FCC3 ETHERNET"
+#define        CONFIG_EXTRA_ENV_SETTINGS       "ethprime=FCC3"
 
 #if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
@@ -163,7 +165,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
 #define CONFIG_SYS_PROMPT              "ep82xxm=> "    /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
@@ -332,7 +333,7 @@
 #define CONFIG_SYS_I2C_SLAVE           0x7F    /* I2C slave address            */
 #endif
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
 #endif
@@ -343,9 +344,8 @@
 #define CONFIG_SYS_IMMR                0xF0000000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 
@@ -360,9 +360,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */