#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL
-
#undef CONFIG_USE_IRQ
/*
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* select serial console configuration
*/
+#define CONFIG_LH7A40X_SERIAL
#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
/* allow to overwrite serial and ethaddr */
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+ #define CONFIG_CMD_PING
+ #undef CONFIG_CMD_CACHE
#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+ #define CONFIG_CMD_DATE
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#define CONFIG_BOOTDELAY 3
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "LPD7A404> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* size and location of u-boot in flash */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MONITOR_LEN (256<<10)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256<<10)
-#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH 1
/* Address and size of Primary Environment Sector */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
-#define CFG_ENV_SIZE 0x40000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
+#define CONFIG_ENV_SIZE 0x40000
#endif /* __LPD7A404_H_ */