i.MX video: use already defined CONFIG_IPUV3_CLK instead of CONFIG_IPU_CLKRATE

[karo-tx-uboot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index b891ee49255d6649dbf5b6b5d5670cfd883e1f78..59255c4e267bd6376b523b459fded7b738c6a81d 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -34,6 +34,7 @@
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_BEAGLE    1       /* working with BEAGLE */
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -50,7 +51,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT               1
@@ -117,21 +117,19 @@
 #define CONFIG_SYS_I2C_NOPROBES                {{0x0, 0x0}}
 
 /* USB */
-#define CONFIG_MUSB_UDC                        1
-#define CONFIG_USB_OMAP3               1
+#define CONFIG_MUSB_GADGET
+#define CONFIG_USB_MUSB_OMAP2PLUS
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_TWL4030_USB             1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE              1
-#define CONFIG_USB_TTY                 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETHER_RNDIS
 
 /* USB EHCI */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 
 #define CONFIG_USB_EHCI_OMAP
-/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
 
 #define CONFIG_USB_ULPI
@@ -146,6 +144,8 @@
 /* commands to include */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_ASKENV
+
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
@@ -178,8 +178,6 @@
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_I2C_MULTI_BUS           1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 #define CONFIG_VIDEO_OMAP3     /* DSS Support                  */
@@ -213,7 +211,7 @@
                                                        /* partition */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY               2
+#define CONFIG_BOOTDELAY               3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
@@ -222,7 +220,7 @@
        "bootfile=uImage.beagle\0" \
        "console=ttyO2,115200n8\0" \
        "mpurate=auto\0" \
-       "buddy=none "\
+       "buddy=none\0" \
        "optargs=\0" \
        "camera=none\0" \
        "vram=12M\0" \
@@ -285,9 +283,9 @@
                "else run userbutton_nonxm; fi;\0" \
        "userbutton_xm=gpio input 4;\0" \
        "userbutton_nonxm=gpio input 7;\0"
-/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
+/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run userbutton; then " \
                        "setenv bootenv uEnv.txt;" \
                "else " \
@@ -314,7 +312,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "OMAP3 beagleboard.org # "
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -342,13 +339,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -397,6 +387,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
@@ -419,6 +410,10 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"